Professional Documents
Culture Documents
Section 01300 Submittals
Section 01300 Submittals
SUBMITTALS
PART - 1 GENERAL
1.08 SAMPLES
A. Contractor shall submit samples, as specified or as otherwise directed by the Engineer
for the review of kind, color, pattern and texture; for a final check of these
characteristics and there compatibility with other elements; and for a comparison of
these characteristics between the final submittal and the actual component as delivered
and installed.
B. Full-size, fully fabricated samples shaped and finished as specified and physically
identical with the material or product proposed, shall be submitted to the Engineer.
Samples shall include partial sections of manufactured or fabricated components, cuts
or containers of materials, color range sets, and swatches showing color, texture and
pattern.
C. Samples shall be mounted, displayed, or packaged in the manner specified or as to
facilitate review of the qualities indicated.
D. Refer to other Specification Sections for requirements for samples illustrating
workmanship, fabrication, techniques, details of assembly, connections, operation and
similar construction characteristics.
PART - 2 PRODUCTS
(NOT USED)
PART - 3 EXECUTION
(NOT USED)
END OF SECTION