Professional Documents
Culture Documents
Pantalla anterior
Bienvenido: cr080x0006886x02
Producto: WHEEL LOADER
Modelo: 962K WHEEL LOADER T6A01032
Configuración: 962K Wheel Loader T6A00001-UP (MACHINE) POWERED BY
C7.1 Engine
Operación de Sistemas
Cat Payload Kit For Medium Wheel Loaders
Número de medio -M0092207-02 Fecha de publicación -01/08/2020 Fecha de actualización -28/08/2020
i08155147
Service Menu
SMCS - 7494
Illustration 1 g06568019
Main Menu screen
Select the "Service" tile from the Main menu to open the "Service" menu.
Note: Some Service Menu options will not be available if Service Mode is set to disabled. See the "Service
Mode" section for more information.
Diagnostics
Home > Menu > Service > Diagnostics
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 1/8
4/12/2020 962K Wheel Loader T6A00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP5726 - 48) - Sistemas y componentes
Illustration 2 g06572302
Service Menu screen
1. Select "Diagnostics".
Illustration 3 g06568020
Example Diagnostic Events List screen
2. The "Events List" screen will display a fault list when active and/or logged events are present. A code,
description, and activity status will accompany each event:
The letter "X" will appear in the "Active" column when the status of the event is "Active".
A dash (-) will appear in the "Active" column when the status of the event is logged (and not
"Active").
Illustration 4 g06568022
Example Event Details screen
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 2/8
4/12/2020 962K Wheel Loader T6A00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP5726 - 48) - Sistemas y componentes
3. Selecting an event from the "Events List" will open the "Events Details" screen.
Configurations
Note: Available only with Service Mode enabled
Illustration 5 g06568023
Service Menu (Service Mode enabled)
Illustration 6 g06568024
Configuration Menu
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 3/8
4/12/2020 962K Wheel Loader T6A00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP5726 - 48) - Sistemas y componentes
Illustration 7 g06568015
Machine Configurations screen
3. Using the drop-down menus, make the appropriate selections for your machine.
Note: The Machine Make, Model, and Linkage must be set before performing any lift linkage
position, tilt linkage position, or payload initial calibration. If not, an ET error will be set and the
calibrations will not be allowed to complete.
Calibrations
Note: Available only with Service Mode enabled
Illustration 8 g06568033
Service Menu (Service Mode enabled)
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 4/8
4/12/2020 962K Wheel Loader T6A00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP5726 - 48) - Sistemas y componentes
Illustration 9 g06568032
2. To perform a calibration function, make the appropriate selection from the "Calibration" menu.
For more information on the "Calibration" menu, see "General Information (Calibration)" in this manual.
ECM Summary
Home > Menu > Service > ECM Summary
Illustration 10 g06572303
Service Menu
Illustration 11 g06568028
ECM Summary menu
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 5/8
4/12/2020 962K Wheel Loader T6A00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP5726 - 48) - Sistemas y componentes
Illustration 12 g06568030
Example ECM details screen
3. The details screen for the selected ECM has additional information.
Service Mode
Home > Menu > Service > Service Mode
Note: A password (pass code) is required to access expanded Configuration and Calibrations menus. The
default password for early versions of the software is "1925". The default password for the latest software
version is "1234".
Illustration 13 g06572304
Service Menu
A Service Mode page with a keypad will appear if Service Mode is disabled. A keypad will not appear
if Service mode is already activated.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 6/8
4/12/2020 962K Wheel Loader T6A00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP5726 - 48) - Sistemas y componentes
Illustration 14 g06568035
Service Mode password entry screen
2. To enable Service Mode and access expanded Configuration and Calibration menus, enter a password
(pass code numbers) on the keypad and select "OK".
Illustration 15 g06568036
Illustration 16 g06568037
Service Menu screen with Service Mode enabled.
When Service Mode is "Enabled", the user can perform the following:
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 7/8
4/12/2020 962K Wheel Loader T6A00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP5726 - 48) - Sistemas y componentes
View expanded Configurations, Calibrations, and ECM Summary information on the Service Menu
page
Illustration 17 g06572305
Service Menu screen with Service Mode disabled
A subset of Configurations and Calibrations will not appear on the "Service Menu" page
Copyright 1993 - 2020 Caterpillar Inc. Fri Dec 04 2020 11:53:50 GMT-0500 (hora estándar de Perú)
Todos los derechos reservados.
cr080x0006886x02
Red privada para licenciados del SIS.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 8/8