Professional Documents
Culture Documents
5. For Air distribution system and designation, the kitchens and Toilets being considered related
to this system as:-
- Negative Pressure (in have chosen this answer) -Positive Pressure -Both A&B -Can’t Recall.
6. A device installed between the air handler and the duct supply/return is called:-
- Smoke Damper - Splitter Damper -Smoke and fire Damper -Can’t Recall.
7- Shaker is working with an organization managed by planning and human recourses, Shaker is
the coordinator between his management and his direct subcontractors, Shaker organization
called:-
- Functional - Functional Matrix -Balanced Matrix -Strong Matrix -Projectized
Note (don’t select projectized or Strong Matrix because both of them are controlled and managed by a project
manager) same our organization in CCC which managed by a project manager
8- In the conduction heat transfer when the thickness of barrier increased the heat transfer will:-
- Decreased -Increased -None affected -Can’t recall
9- When the velocity of flow is the same at every point of the fluid the flow can be considered as:-
- Steady -Unsteady -Uniform -Non-uniform
11- Hookes low states that the restoring force of spring is directly ----- to a small displacement:-
12- NFPA ---- is for smoke management systems in malls, Atria, and large spaces:-
- NFPA 72 - NFPA 92B -NFPA2001 -NFPA 101
13- How often manual control point frequency visual inspected as per NFPA:-
25- One question came regarding db (debits) I believe part of electrical I couldn’t answer.
15- How often Radiant energy frequency visual tested as per NFPA 72:-
16-How often valve tamper switches visual tested as per NFPA 72:-
17-How often Pressure supervisory indicating device visual tested as per NFPA 72:-
18- Safety and first aid expenses are considered as direct cost:-
- True - False
- True -False
20- Activity (B) has 5 days lead compares to (A) what it means:-
a. Activity B start 5 days before A completion -Activity A and B both will start on 5th day
b. 5 days waiting time between Activities A & B -None of above
21- Maximum velocity of the flow inside the pipe will be:-
- At the center of pipe -At the wall of pipe -Both -Can’t recall
22- Reynolds’s Number is a relation between the velocity and the viscosity:-
- True -False
________________________________________________________________________
1- As per NFPA72 the manual call point testing frequency is:
- a- Bulk Modulus -b- Modulus of elasticity -c- Modulus of rigidity -d-
Poisson`s ratio
3- Strain unit is:
- a- Electrical Charge -b- Electrical Energy -c- Electrical Power -d- ……..
- a. Float - b. Critical path -c. Slack -d. Merging point
7- An object that deforms continuously under applied shear stress is called:
9- If we increase the insulation around the pipe, heat transfer will:
- a- Equal. -b- Directly proportional. -- Inversely proportional. -d- .........(cannot
remember)
- If you were awarded a project, you will start work:
o One week before the approval of the authorities
o After the approval of the authorities
o One day before the approval of the authorities
- Project Scope Management:
o Define scope and control scope -Executing scope and verify scope
o Closing process and Create work breakdown structure - All of the above - Only A
&B
- Scope Management starts with is:
o To identify the client requirements
o Meet the team
o Review strategic plan
- Final as built drawings for what purpose
o To keep record for later maintenance
o To give more work to architect
o To be used for further renovation
- Control department work starts
o From the beginning of the project
o During construction
o After construction
- Project management is ideally suited except
o Accountability -Flexibility -Innovation
o Speed
o Repeatability
2. Strain Unit?
a. Dimension less
b. ¼ PI
c. Pa
d. N/mm2
3. You discover violation of specification at nearly end of the project, what you will do…
a. Inform to Client and ask what to do
b. You will try to find some loophole to escape from the problem arisen
c. Do nothing , its Boss problem ,he will handle it later
d. Punish the violator
5. Some devices to be installed (don’t remember-may fire sprinkler ) related to distance from the centre of
elevator
a. 6.4 meter
b. 4.6 meter ( I am not sure)
c. 3 meter
d. 1.5 meter
Got this as proof from online: A lobby smoke detector shall be located on the ceiling within 21 ft (6.4 m) of the centerline
of each elevator door within the elevator bank under control of the detector.
7. Efficiency of a power plant if the efficiencies of the boiler, turbine and generator are 88, 40 and
98%, respectively.
a. 35 % { Epower plant = [Eboiler] [Eturbine] [Egenerator] = (0.88) (0.40) (0.98) = 0.35 }
b. 42% - 90% -15%
10. If you are going to start with oil pipeline construction which is the following engineer you are going to
choose:
a. Petroleum
b. Mechanical
c. Civil
d. Chemical
15. Coefficient of performance of a refrigerator that consumes 800 watts of power to remove heat at a rate of
5 BTU per second.
a. 4.6
b. 6.6 ( 5 x 1055/800 = 6.6) ( where 1BTU=1055 j) & ( 1 watt = 1j/s)
c. 8.2
d. 3.5
a. Concept
b. Initiating -Planning -Executing -Closing
19. Water elevation on a tank is 10 meter. If P=ρgh and ρ =1000kg /m3, g=9.81 m/sec. what is
the pressure of the water inside the tank:
a. 100 KPa
b. 150 KPa
c. 450 KPa -981 KPa
23. Egress corridor can have air ducts penetrating from neighbouring room walls and doors. T or F.
(False)
24. An incompressible, non-viscous fluid travelling horizontally, if velocity decreases, note: p/ρ + v 2/2g +
gz= constant: TAKE CARE ρ is written like P in test so do not simplify and take it as 1
a- Pressure decreases
b- Pressure increases
a- Temperature decreases
28. When centrifugal pumps run and vapour starts forming in its center, this is called”
a- Water hammer
b- Cavitation
c- Boiling
d- None of the above
29. A vertical façade has a film like condensation of thickness K as the move away from the façade the
heat transfer rate H
a- Increases
b- Decreases
c- Not affected.
Personally was not sure but chose increases as the more condensation you have the more heat has
been absorbed from outside dropping the temperature until saturation temperature has become
lower.
8. How often shall test frequency be done for heat detector as per NFPA72
Quarterly
9. How often test of manual call point as NFPA72
Monthly
Tariq checked
Tariq checked
Tariq checked
12. What is the rating of fire wall required for four story or more
a. 1 hour -2 hour -30 min -45 min
Tariq checked
13. Visual inspection for primary and secondary supply as per NFPA
a. Monthly
b. Weekly
c. Quarterly
d. Annually