Professional Documents
Culture Documents
Corrugated Metal Sheet Size
Corrugated Metal Sheet Size
Corrugated Metal
Request A Quote (215) 486-3658
The 2-1/2” x ½” corrugated sheet metal is probably the most common corrugated panel
on the market today, and has been used as the standard“ corrugated” for many years now.
The 2-1/2” corrugated is typically used for the “pole-barn” and almost simple corrugated
structure. The 2-1/2” dimension denotes the distance from the peak of one ‘bump to the peak of the next, and has an
overall height of ½”.We typically stock and sell this in the (G-90) galvanized finish as our standard stocking item, but can
provide this is any material you require, such as a plain steel, fiberglass, aluminum (smooth & stucco embossed) as well a
painted finish and stainless steel, in both the (T-304) & (T316) materials. Our stocking sheets are all galvanized ::
18 – 20 – 22 – 24 – 26 –GAUGES Galvanized
27-1/2”Wide x 8’L
27-1/2”Wide x 10’L
27-1/2”Wide x 12’L
27-1/2”Wide x 20’L
(41-1/4”Wide in S.S. / Alum. 42”W / Fiberglass 45”W) (Custom Width & Lengths Available Upon Request)
https://www.corrugatedmetal.com/corrugated-metal-panels/ 1/5
5/15/2019 Corrugated Metal Panels |
Other finishes will have varying widths, so please inquire as to which width is the standard for each material type. We
also have started offering the 2-1/2” x ½” in a corrugated & perforated panel which is very unique, which we can do
almost any hole pattern with. The 2-1/2” x ½” corrugated panel profile is certainly the most common and most versatile
panel on them market today and can be used in any application you may need. Please call Corrugated Metal (215-860-
3600) with any size inquiry, 1-2 sheets or 1,000 to 2,000 sheets and we can ship directly from our stock sheets. Also,
inquire about whatever finish or material you may need and our sales staff will more then happy to customize your quote
and material to fit your needs.
2-6/7"x3/4" Corrugated
The 2.67′ x 3/4" corrugated profile offers a deep groove for a more pronounced
corrugated style. This deeper groove offers a stronger overall panel in any gauge
thickness, and allow for a larger span. The 3/4" corrugated is offer in both the
galvalume and aluminum materials in standard lengths of 8′,10′, & 12′ long. The
typical material thickness offered are either 18-20-22-or-24 gauge. The corrugated
with this 2.67" spacing is very widely used in many roofing applications with it’s
deep grooving allows more run off of water, and gives an overall S-Style that has
the look many people are after. We can offer this panel in stainless steel, but we
would typically stock this in either a plain galvalume material or the aluminum
mill finish, with the smooth or stucco-embossed finish. We also spec. this panel
with a large number of our perforated & corrugated panel requests. We can also
quote this material in a painted finish as well. Please call Corrugated Metal with
your inquiry and our knowledgeable staff will more then happy to help you with your order, or material quotation.
Net Coverage
Metal Overall Widths Finish Edges Availability
Siding Roofing
31"0 SE/MF 29 1/3" 29 1/3" 2 Down Standard
Steel & Aluminum
41 3/4" SE/MF 40" 37 1/3" 1 U/D Standard
https://www.corrugatedmetal.com/corrugated-metal-panels/ 2/5
5/15/2019 Corrugated Metal Panels |
4.2" Corrugated
The 4.2 corrugated panel is a high profile, wavy style panel that is used and can be used in almost any roofing, siding, or
decorative application. The (4.2) panel groove is similar to the standard 2-1/2" corrugated and based on the same premise
but with bigger more pronounced look. Originally this profile was made in a concrete version and used as an asbestos
replacement panel, it is now used in the industry for many others applications where a corrugated look is wanted. The
4.2-Inches denote the distance from one peak to the next peak and has an overall height of 1-1/16" if were laying flat on
the ground, this is deepest "wavy" style of corrugated available anywhere.
The 4.2 Profile is the preferred choice in many applications where a traditional "corrugated" will work but not look as
good, or have the strength of this panel. Not many companies in the country even carry the 4.2 wavy style of corrugated,
so look no further since, we also stock this and can make it practically in any material our customers can imagine. Below,
are stock sizes, but almost anything can be done in a plain-steel or the standard galvanized. We can also, offer this in a
painted version, or stainless steel (both T304 & T316, and in 2-B & #4 finishes), and in aluminum with a mill (smooth)
finish, or the Stucco-Embossed (pebble finish). Now offering the 4.2 panel in lengths up to 40′ long. We are also the first
offer this in a perforated and corrugated panel which is one the top choices by architects and designers. Please call
Corrugated Metal and explore all the possibilities when using the (4.2) Corrugated Roofing/ Siding panel.
https://www.corrugatedmetal.com/corrugated-metal-panels/ 3/5
5/15/2019 Corrugated Metal Panels |
18-Gauge / 20-Gauge / 22-Gauge / 24-Gauge All 42" Wide – 8’Long / 10’Long / 12’Long (max.)
Search
Home
Perforated Metal – Round Hole Metal
Quote Request
Corrugated Metal Roofing
Galvalume
Galvanized
Kynar Painted Finish
Stainless Steel
Corrugated Metal Panels
1.25 inch by 1/4 inch
2 1/2 inch by 1/2 inch
2.67 inch by 3/4 inch
2.67 inch by 7/8 inch
4.2 inch
Corrugated and Perforated
Five Sixteenth Inch Diagonal Holes
One Fourth Inch Holes
One Half Inch Diagonal Holes
Three Eighth Inch Diagonal Holes
Three Fourth Inch Diagonal Holes
Corrugated Roof Deck
A Deck
B Deck
EHD Deck
F Deck
N Deck
Corrugated Floor Deck
1.5 inch Composite Floor
2 inch Composite Floor
3 inch Composite Floor
Expanded Metal
Flattened
Standard
Gratings
Frequently Asked Questions
Material Finishes
Plain Carbon (C.R.) Steel
https://www.corrugatedmetal.com/corrugated-metal-panels/ 4/5
5/15/2019 Corrugated Metal Panels |
https://www.corrugatedmetal.com/corrugated-metal-panels/ 5/5