Professional Documents
Culture Documents
swell able packer is a suitable solution to create annular seal between open hole and
casing in non-cemented completion where it is not possible to set mechanical packers.
Features
- Applicable for cased open hole completion
- Robust assembly
- Self-improving, intervention- less technology
- Multiple polymers available to provide oil swelling (OS) , water swelling (WS) and
swelling (HS) solutions.
Benefits
- Preserve casing integrity, applicable to
Permanent packer
It is accepted that expansion process of ESS needs fixed end. A packer meets this
necessity. Taking into the account that, the packer will be a part of casing SAB-3 Baker
Hughes has been selected. This packer is a permanent packer, which is set by the
hydraulic pressure. Unique interlocking, expandable metal back-up ring prevents packer
rubber extrusion. This makes the packer ideal for high angle deviated wells, common in
offshore operations
Packer advantages
Slim-line design
Solid construction enables 50% faster run-in without fear of impact
Packing element resists swab-off and packs off securely when packer is set
The SAB-3 baker Hughes is set by the hydraulic pressure. A plugging device is
attached below the packer. Then after, plugging the main mandrel sets off the hydraulic
pressure to build up which results in moving internal piston. As consequence, the
movements of piston lead to upper anchors, seal elements and down anchors set,
respectively.
Figure 1: SAB-3 baker Hughes packer
Setting procedure
Here is setting instruction procedure for setting the SAB-3 Baker Hughes hydraulic
packer.
- Run blanking plug below the packer.
E- hydro trip sub can be substituted for blanking plug; in this case a ball must
be dropped into the tubing.
- pump fluid to achieve the sufficient pressure as a setting activator.
Milling procedure
Considering the fact that SAB-3 Baker Hughes is permanent packer, after service life
the packer will be mill out.
Packer accessories
Plugging device Model “E” Hydro-Trip Sub, blanking plug, parallel flow system,
packer- bore receptacle.
Milling devices such as Mill out extension
Features
OD 149mm 206mm
Material
Seal element HNBR