Professional Documents
Culture Documents
Tel : +82 52 204 7860 / FAX: +82 52 204 7801 / Web : http://www.hyundai-gs.com/E-MAIL : service@hyundai-gs.com
Service Letter
Recently, from some vessels, we have found the fact that the sticker attached on the
crank case door for the check tightening of the hyd. studs has been attached incorrectly
as shown below.
1/2
In order to avoid the unexpected problem, you are kindly asked to check the sticker by
H35GV
TYPE H17/28(U) H17/28E H21/32 H25/33 H32/40 H35DF DFV
H32/40V
Main Bearing
1150 bar 1100 bar 1200 bar 1200 bar 1200 bar 1200 bar 1200 bar
Cap
Side Stud 900 bar 150Nm + 90° 850 bar 950 bar 900 bar 900 bar 900 bar
350Nm + 60°+
Counter Weight 340Nm 850 bar 950 bar 1000 bar 1000 bar 1200 bar
Locking Wire
230Nm +
Con-rod Shaft - 1150 bar 1100 bar 1100 bar 1100 bar 1100 bar
Locking Wire
Con-rod Big-
900 bar 450Nm 950 bar 1100 bar 1100 bar 1100 bar 1100 bar
End
If the attached sticker is not correct, please contact us and then we will provide the
correct one.
Faithfully yours,
E-mail : service@hyundai-gs.com
Hi-Service : http://www.hyundai-gs.com/
2/2