Professional Documents
Culture Documents
3 D C A D M E A S U R I N G S O F T W A R E
S(0)=SNSDEF/PROBE,INDEX,POL,0,0,0,0,1,142,3
SNSLCT/SA(0)
T(DIAM)=TOL/DIAM,-0.075,0.075
F(CR0)=FEAT/CIRCLE,INNER,CART,725,506,-734,0,0,1,52
MEAS/CIRCLE,F(CR0),3
ENDMES
OUTPUT/FA(CR0),TA(DIAM)
Wizard based Calibration ensures correct metrology Wizard based Alignment guarantees a complicated
principles are applied automatically. component set-up is produced error-free.
Standard Windows ™ ‘drag and drop’ capability provides Wizard based Feature Measurement automatically recognises
multiple feature tolerancing with one operation. the element type, allowing the creation of part-programs with
no keyboard input required.
CAMIO Studio
Camio Studio can detect the correct probe Reference Point System (RPS) alignments are
head angles to be used simply by measuring configured in a central dialog box and can
the feature. contain 3, 4 ,5 or 6 points.
CAMIO Inspect a 21st century Windows™ based user interface designed to provide
the quickest and simplest tools for the most advanced non-CAD
programming environment available.
Scanning of point cloud data using LK Scanning Algorithms. Specially designed tools
enable fast creation of DMIS based scanning programs. Results can be text,
graphical or compared directly back to CAD nominal data.
For rapid data collection, continuous scanning with digital touch-trigger probes (i.e. TP20, TP200) is available through
LK’s unique CMM controller capability. Data collection rates of up to 5 points per second (Renishaw TP200 value)
give accurate form indication of geometric features and surfaces to provide a cost effective scanning solution
eliminating the need for expensive analogue probing technology.
For high accuracy and high speed scanning, analogue probing technology provides data collection rates of up to
1,000 points per second with scanning speeds in excess of 12 metres per minute. The option of automatic recovery
from loss of contact with the component or pre-programmed ‘Known’ scan paths ensure optimum probing is
maintained.
Laser stripe scanning probes provide non-contact measurement for both geometric and free-form components.
Collecting up to 23,000 points per second, laser probes are ideal for applications where speed is a requirement
and large point cloud data is needed.
CAD Links
Exchange Languages:
IGES (5.2) Open and Save
VDA-FS (2.0) Open and Save Highlights
STEP (AP203, AP214) Open and Save
LK CAMIO CAD Links provide the interoperability High Quality 'one-click' Graphical Reporting
to facilitate the transfer of data from proprietary
CAD products to CAMIO Studio. Using the original
native CAD Libraries with no reverse engineering Common on-line/off-line Interface
of data, a direct link to all the major CAD systems
with no loss of data is provided.
©2002 LK Limited - This publication is issued to provide outline information only which, unless agreed by LK Limited in writing, may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products
or services concerned. LK Limited reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service. All manufacturers trademarks acknowledged.