Professional Documents
Culture Documents
MCQ in Wire and Wireless Communications System Part 9 ECE Board
MCQ in Wire and Wireless Communications System Part 9 ECE Board
9 | ECE Board
pinoybix.org/2015/01/mcqs-in-wire-and-wireless-communications-system-part9.html
January 2, 2015
This is the Multiples Choice Questions Part 9 of the Series in Wire and Wireless
Communications System as one of the Communications Engineering topic. In Preparation
for the ECE Board Exam make sure to expose yourself and familiarize in each and every
questions compiled here taken from various sources including but not limited to past
Board Examination Questions in Electronic System and Technologies, Communications
Books, Journals and other Communications References.
LIVE
1/20
An error occurred. Please try again later
Tap to unmute
Learn more
401. When the image at the receiving end of a facsimile transmission is elongated
vertically,
View Answer:
Answer: Option A
Solution:
View Answer:
Answer: Option C
Solution:
A. fidelity
B. contrast
C. legibility
D. chroma
View Answer:
Answer: Option B
Solution:
404. The feedback signals that help prevent the speaker from talking too loudly.
A. busy tone
B. ringback tone
C. dial tone
D. sidetone
View Answer:
Answer: Option D
Solution:
A. loop signaling
3/20
B. station signaling
C. interoffice signaling
D. pulse signaling
View Answer:
Answer: Option C
Solution:
406. A signal sent from the switching machine back to the calling station whenever the
system cannot complete call because of equipment unavailability.
A. busy tone
C. fax tone
D. congestion tone
View Answer:
Answer: Option D
Solution:
407. The final length of cable pair that terminates at the SNI
A. aerial
B. drop wire
C. distribution cable
D. cross-connect cables
View Answer:
Answer: Option B
Solution:
408. It is the difference in circuit gain experienced at a particular frequency with respect to
the circuit gain of a reference frequency.
4/20
A. dynamic range
B. absorption distortion
C. attenuation distortion
D. selective fading
View Answer:
Answer: Option C
Solution:
409. In telephone systems, a special type of line conditioning that pertains to line
impairments for which compensation can be made with filters and equalizers.
A. A-line conditioning
B. B-line conditioning
C. C-line conditioning
D. D-line conditioning
View Answer:
Answer: Option C
Solution:
410. An envelope delay distortion test on a basic telephone channel indicated that an 1800-
Hz carrier experienced the minimum absolute delay of 400 µs. The maximum envelope
delay for a basic telephone channel is 1750 µs within the frequency range 800 Hz to 2600
Hz. What is the maximum envelope delay?
A. 2150 µs
B. 2550 µs
C. 3000 µs
D. 3400 µs
View Answer:
Answer: Option A
5/20
Solution:
411. In SS7 signaling points, codes that are carried in signaling messages exchanged
between signaling points to identify the source and destination of each message
A. signaling points
B. service points
C. switching points
D. point codes
View Answer:
Answer: Option D
Solution:
412. Stage of the step-by-step switching system that is composed of switches to complete
the connection to the called subscriber.
A. line equipment
B. switch train
C. connectors
D. switching network
View Answer:
Answer: Option C
Solution:
413. ____________ is the switching system that is a branch of the local central office.
A. local exchange
B. branch exchange
C. subscriber loop
D. line
View Answer:
6/20
Answer: Option B
Solution:
A. Impact
B. Thermal
C. Electrosensitive
D. Laser xerographic
View Answer:
Answer: Option B
Solution:
415. Aside from tip and ring used in local loops the third wire when used is called
__________.
A. reserve
B. sleeve
C. ground
D. none of these
View Answer:
Answer: Option B
Solution:
416. Acknowledgement and status signals that ensure the process necessary to set up and
terminate a telephone call are completed in an orderly and timely manner,
Answer: Option A
Solution:
View Answer:
Answer: Option A
Solution:
418. The location where individual cable pairs within a distribution cable are separated and
extended to the subscriber’s location on a drop wire
View Answer:
Answer: Option C
Solution:
c. 20 – 20 kHz
8/20
d. 30 – 30 kHz
View Answer:
Answer: Option A
Solution:
420. A the receiver, the phase difference at the different carrier frequencies is called
_________.
A. propagation time
B. phase delay
C. envelope delay
View Answer:
Answer: Option D
Solution:
421. It is a sudden, random changes in the phase of the signal. They are classified as
temporary variations in the phase of the signal lasting longer than 4 ms.
A. phase hits
B. phase jitter
C. interference
D. distortion
View Answer:
Answer: Option A
Solution:
422. Circuits that are designed and configured for their use only and often referred to as
private circuits or dedicated circuits.
A. switched circuits
9/20
B. leased circuits
C. virtual circuits
View Answer:
Answer: Option B
Solution:
A. circuit switch
B. tap switch
C. equipment switch
D. cross switch
View Answer:
Answer: Option A
Solution:
424. Interstate long distance telephone calls require a small telephone office called
_________.
A. sectional office
B. regional office
C. toll office
D. end office
View Answer:
Answer: Option C
Solution:
425. A call that cannot be completed because the necessary trunk circuits or switching
paths are not available.
10/20
A. blocking
B. holding
C. storing
D. none of these
View Answer:
Answer: Option A
Solution:
426. A mandate that requires all telephone companies to support the porting of telephone
number.
View Answer:
Answer: Option C
Solution:
427. The connection between the telephone and the central office’s switching equipment.
A. line sensors
B. relay circuits
C. subscriber loop
D. supervisory relay
View Answer:
Answer: Option C
Solution:
B. telecommunication
C. facsimile transmission
D. mobile communication
View Answer:
Answer: Option C
Solution:
A. Newspaper text
B. Architectural drawings
C. Cable movies
View Answer:
Answer: Option D
Solution:
A. telephone
B. television
C. facsimile
D. computer
View Answer:
Answer: Option A
Solution:
12/20
431. Early paging system uses what modulation technique?
A. pulse modulation
B. amplitude modulation
C. phase modulation
D. frequency modulation
View Answer:
Answer: Option D
Solution:
432. A device that serves as a demarcation point between local telephone company
responsibility and subscriber responsibility for telephone service.
View Answer:
Answer: Option A
Solution:
433. It is the actual time required for a particular frequency to propagate from a source to a
destination through a communications channel.
D. phase distortion
View Answer:
Answer: Option C
13/20
Solution:
434. It is a sudden, random change in the gain of the circuit resulting in a temporary
change in the signal level.
A. spikes
B. gain hits
C. jitter
D. echo
View Answer:
Answer: Option B
Solution:
435. A typical echo suppressor suppresses the returned echo by how much?
A. 10 dB
B. 30 dB
C. 45 dB
D. 60 dB
View Answer:
Answer: Option D
Solution:
436. In telephony, functions that supply and interpret control and supervisory signals
needed to perform the operation
A. calling functions
B. maintenance functions
C. signaling functions
D. transmission functions
View Answer:
14/20
Answer: Option C
Solution:
A. central offices
B. exchange offices
C. exchanges
D. any of these
View Answer:
Answer: Option D
Solution:
438. It is simply a path between two subscribers and is comprised of one or more switches,
two local loops or possibly one or more trunk circuits.
A. way
B. route
C. path
D. mode
View Answer:
Answer: Option B
Solution:
439. It defines the procedures and protocols necessary to exchange information over the
PSTN using a separate digital signaling network to provide wireless and wireline telephone
call setup, routing and control.
A. C7
15/20
C. SS7
D. any of these
View Answer:
Answer: Option D
Solution:
440. In a 4-wire telephone set connection, (used to connect telephone set to central office
switching) the red coded wire is used __________.
A. as ground wire
View Answer:
Answer: Option C
Solution:
A. line
B. trunk
C. loop
D. signaling
View Answer:
Answer: Option B
Solution:
A. propagation time
B. transmission rate
16/20
C. holding time
D. transmission time
View Answer:
Answer: Option D
Solution:
443. It is a combination of passive components that are used to regulate the amplitude and
frequency response of the voice signals.
A. equalizer circuit
B. balanced transformer
C. balanced modulator
D. hybrid network
View Answer:
Answer: Option A
Solution:
444. A signal that is sent from the switching machine back to the calling station whenever
the called telephone number is off-hook.
B. ringback signal
C. busy signal
D. off-hook signal
View Answer:
Answer: Option C
Solution:
445. A smaller version of the feeder cable containing less wire pairs.
A. aerial
17/20
B. drop wire
C. feeder cable
D. distribution cable
View Answer:
Answer: Option D
Solution:
446. It is a parameter equivalent to TLP except that it is used as a reference for data
transmission.
View Answer:
Answer: Option B
Solution:
447. He developed the first instrument that transmitted music over a wire
A. Philipp Reis
B. Antonio Meucci
C. Thomas Edison
D. Almon Strowger
View Answer:
Answer: Option A
Solution:
448. It is used to convert two-wire circuits to four-wire circuits which is similar to hybrid
coil found in standard telephone sets.
18/20
A. balanced transformer
B. hybrid circuits
C. balanced modulator
D. hybrid transformers
View Answer:
Answer: Option B
Solution:
449. A switchboard with four digits can accommodate how many telephone numbers?
A. 1,000
B. 10,000
C. 100,000
D. 9999
View Answer:
Answer: Option A
Solution:
450. The trunk circuits that are terminated in tandem switches are called
A. tie trunks
B. tandem trunks
C. office trunks
D. exchange trunks
View Answer:
Answer: Option B
Solution:
19/20
Following is the list of multiple choice questions in this brand new series:
20/20