Professional Documents
Culture Documents
Technical Assumptions
Geometry Stability
Depth D 9.5 m Required GM Gmreq 2.00 m
Superstructure Proportion vs 0.25 Deck Height ∆H 2.50 m
Block Coefficient Cb 0.50 Minimum Double Bottom Height R 2.00 m
Prismatic Coefficient Cp 0.62 D3 Min 9.50 m
Flare/Sheer Factor Kf 1.1 D4 Min 12 m
Flare Angle Above Waterline (Kf) 10 degrees
Superstructure Length Proportion Ksl 0.3
Midship Section Coefficient Cm 0.81 Density of Sea Water ρ 1.026 tonnes/m^3
Calculated Values
Volumes Form Parameters
Overall Density of Frigate ρ~ 0.293 tonnes/m^3 ~0.3? Circular M Circ M 8.15495206
Main Hull Displacement Proportion ρ~m 0.391 tonnes/m^3 Vertical Prismatic Coefficient Cv 0.00184389
Main Hull Volume Vm 12597 m^3 Waterplane Area Coefficient Cw 0.7654321
Superstructure Volume Vs 4199 m^3 Waterplane Inertia Coefficient Cit 0.60221477
Displaced Volume DV 4925.878 m^3
Stability Parameters
Dimensions Metacentric Height GM 1.79665637 m
Length L 138.755 m Keel to CoG KG 5.4684375 m
Beam B 14.760 m Keel to CoB KB 2.83493215 m
Draught T 4.936 m CoB to Metacentre BM 4.43016173 m
Depth D 9.500 m
Freeboard F 4.564 m Beam to Draught Ratio B/T 2.99049025 ~3.1?
Superstructure Length Ls 41.627 m Beam to Depth Ratio B/D 1.55365087 ~1.5?
Superstructure Depth Ds 6.834 m Length to Beam Ratio L/B 9.40096087 ~8.5?
F + Ds 11.399 m Draught to Depth Ratio T/D 0.51953049 ~0.5?
E-1
Annex E – 3 Deck Monohull Geometry and Powering
M.Sc. Naval Architecture Ship Design Exercise 2007
Group 4 – AAW Monohull
COST £ 218455434.44
E-2