Professional Documents
Culture Documents
Description
The Pall UltiKleen STP filter is specifically engineered for
filtering organic stripper. In the organic stripping process, a
variety of sizes and types of gels and particles are generated
as a result of the various ashing processes. The ashing can
change the gels to a distribution of fine particles. These fine
particles can quickly clog conventional design high surface
area membrane filters.
The UltiKleen STP filter is the latest advance in Pall
Corporation’s stripper filtration offerings. It uses a combination
of carefully controlled submicron filter media. The filter is
further optimized with gel-capturing, depth matrix media to
effectively filter organic stripper. The proprietary media layering
construction maintains high flows while removing unwanted
particles and gels.
0.05 µm
0.03
4
0.02 0.1 µm
3
0.01 0.2 µm
0 0
0 5 10 15 20 25 30 35 40
Flow rate (L/min)
*1
Typical flow rates.
For liquids other than water, multiply the differential pressure by fluid viscosity in centipoise.
Unit conversion: 1 bar = 0.1 MPa
Dimensions 2
83 / 3.27
*2
Nominal lenght (mm / in)
Code
Nominal Length Code Removal
Ratings Code O-ring options Code Prewet Option
Inch L (mm)
D 0.05 µm FEP encapsulated Prewet filter
1 10 225 H1 fluoroelastomer -K3
(packaged in DI water)
T 0.1 µm
H11 Kalrez *2 Prewet filter (packaged in
R 0.2 µm
-K7 DI water), Low metal
extractables *3
UltiKleenTM G2 STP KC Assemblies
Pressure Drop vs. Liquid flow Rate (Water, 20˚C) 1
10 in T flow 10 in In-line
Inlet : ¾ inch Inlet : ¾ inch
Flow rate (gpm) Flow rate (gpm)
0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10
0.05 7 0.05 7
Clean pressure drop (MPa)
0.05 µm 0.05 µm
Clean pressure drop (psi)
0.04 6 0.04 6
0.1 µm 5 5
0.1 µm
0.03 0.03
4 4
0.2 µm
0.02 3 0.02 3
0.2 µm
2 2
0.01 0.01
1 1
0 0 0 0
0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40
Flow rate (L/min) Flow rate (L/min)
*1
Typical flow rates.
For liquids other than water, multiply the differential pressure by fluid viscosity in centipoise.
Unit conversion: 1 bar = 0.1 MPa
Part Numbers / Ordering Information
LDF 1 2 1STQ 3 4 E 5 6
L L L L
Microelectronics