Professional Documents
Culture Documents
Udemy Student Name: Udemy Email:: Structural Analysis I Beam Analysis Knowledge Assessment Test
Udemy Student Name: Udemy Email:: Structural Analysis I Beam Analysis Knowledge Assessment Test
Please provide the above information only if you wish to receive feedback from our team.
This is a fillable Microsoft Word document. You can select/enter your answers in the provided input
fields, highlighted in green throughout the document.
To receive feedback, after answering the questions, save the file as a PDF and email it to:
Dr.Structure@EducativeTechnologies.net
Dr. Structure P a g e |1
Structural Analysis I Beam Analysis Knowledge Assessment Test
Question 1: Consider a simply supported beam subjected to a concentrated load, as shown below.
The beam has two vertical reactions. There is a reaction force at A and there is one at B. Is it true that
these reaction forces are equal in magnitude? Check the correct response below.
Does the applied load cause a bending moment at support A? If yes, what is the magnitude of the
moment?
. Click or tap here to enter text.
Question 3: For the beam given in Question 2, what is the direction of bending moment caused by the
vertical reaction at the roller support about end A?
. Click or tap here to enter text.
Question 4: For a given structure, what does it mean when the static equilibrium equations are satisfied
for one loading case but cannot be satisfied for another loading case?
. Click or tap here to enter text.
Dr. Structure P a g e |2
Structural Analysis I Beam Analysis Knowledge Assessment Test
Question 5: A simply supported beam is subjected to a concentrated load of 24 kN. The beam rests on a
pin and a roller at its ends, as shown below.
Select all the correct equilibrium equations for the beam’s free-body diagram.
. ☐ A x =0
. ☐ A y + B y −24=0
. ☐ ( 6 ) ( 24 )−8 B y =0
. ☐ ( 2 ) ( 24 )−8 A y =0
Dr. Structure P a g e |3
Structural Analysis I Beam Analysis Knowledge Assessment Test
(A)
(B)
(C)
Question 7: For the free-body diagram shown below, we are given the following equilibrium equation:
6 A y +2 B y −( 4 ) ( 30 )=0 .
Question 8: To calculate the support reactions for a beam, we need to draw the beam’s free-body
diagram, then write and solve the following static equilibrium equations:
∑ F x=0 ∑ F y=0 ∑ M z =0
But, before we can write the equations, we need to establish a sign convention. This involves indicating
the positive directions along the x and y axes, and the positive direction for rotation about the z axis.
Dr. Structure P a g e |4
Structural Analysis I Beam Analysis Knowledge Assessment Test
Which of the following diagrams show a correct sign convention for writing the equilibrium equations?
Question 10: A cantilever beam and its free-body diagram are shown below.
Dr. Structure P a g e |5
Structural Analysis I Beam Analysis Knowledge Assessment Test
Question 11: A beam, subjected to a vertical load, is resting on two rollers, as shown below.
Question 12: What is a statically determinate beam? What does it mean for the beam to be statically
determinate?
. Click or tap here to enter text.
Question 13: A beam is resting on two rollers. There is an inclined load of 80 kN applied at the midpoint
of the beam.
Dr. Structure P a g e |6
Structural Analysis I Beam Analysis Knowledge Assessment Test
Question 14: Given the following cantilever beam and its free-body diagram, write the static equilibrium
equations for calculating the support reactions at A.
Dr. Structure P a g e |7
Structural Analysis I Beam Analysis Knowledge Assessment Test
Is there an alternative formulation for the equilibrium equations that yields a different result? Explain.
. Click or tap here to enter text.
How many equilibrium equations do we need to calculate the support reaction forces?
. Click or tap here to enter text.
How many non-zero reaction forces are there for this column?
. Click or tap here to enter text.
Write the static equilibrium equations for calculating the support reactions below. You can use
uppercase letters (P, Q, M, etc.) to denote the unknown reactions.
. Click or tap here to enter text.
Using the equations that you wrote above, calculate the magnitude of each reaction force. Please write
the force magnitudes and show their units below.
. Click or tap here to enter text.
Dr. Structure P a g e |8
Structural Analysis I Beam Analysis Knowledge Assessment Test
We are asked to identify the moment equilibrium condition about point A. Select the correct equation(s)
from the list below.
. ☐ ( 2 ) ( 30 ) + ( 2 )( 10 )−4 B y =0
. ☐ −( 2 ) ( 30 )−( 2 ) ( 10 )−4 B y =0
. ☐ ( 2 ) ( 30 ) + ( 6 ) ( 10 )−4 B y =0
. ☐ −( 2 ) ( 30 )−( 6 )( 10 ) + 4 B y =0
Question 18: A simply supported beam and its free-body diagram are shown below.
The following equilibrium equations have been written for the above diagram.
∑ F y = A y + B y −15−30=0
Dr. Structure P a g e |9
Structural Analysis I Beam Analysis Knowledge Assessment Test
A y equals:
. Click or tap here to enter text.
B y equals:
. Click or tap here to enter text.
Given the following four diagrams, identify the correct free-body diagram(s) for the beam.
(A (C)
)
(B) (D
)
Question 20: From the structural analysis standpoint, what is the main difference between a beam and a
truss? How differently do the two structures carry their loads?
. Click or tap here to enter text.
Dr. Structure P a g e | 10