Professional Documents
Culture Documents
Designed for Total Accessibility • 3” square drawbar • Idle warm-up valve Durable, Baked-on Powder Coat
and Reliability • Screw jack with pad • Glow plug starting aid Finish
• Adjustable height hitch
Clam Shell Canopy • Transport security chains SSAM–Shutdown System & Dual Fuel Filtration System
• Canopy opens fully with gas assist • Recessed tail lights Annunciation Module • Primary fuel / water separator with
springs • Rear bumper • Shutdown with annunciator light for transparent bowl and water drain
• Serviceable components are within easy high compressor temperature, high • Final filter with drain
reach, routine maintenance is simplified Environmental Features engine coolant temperature, low engine
• Sealed crankcase ventilation system* oil pressure and engine underspeed Air End Warranty
Corrosion Resistant Enclosure • 500 hour engine oil change* • 5-year or 10,000-hour warranty when
• Galvanneal sheet metal with composite • 1500 hour compressor lube change Capacity Control System continuously serviced at the
end caps and fenders • Engine is Tier 2 emissions compliant • Pneumatic inlet valve and unloaded recommended intervals with Sullair
• Stainless steel hinges and latches, (John Deere) or Interim Tier 4 emissions starting AWF Compressor Fluid and filters
plated fittings and hardware compliant (CAT) • Color coded control lines • 2-year standard warranty
• Aluminum instrument panel door • Heated controls to prevent freezing
Curbside Instrument Panel Quiet Operation
Highway Towable Running Gear • Hinged, padlockable cover Two-Stage dry type air filters • Meets US EPA sound requirements of
• Independent rubber torsion suspension • Mechanical air pressure gauge and • Separate filters for engine and 76 dBA @ 7 meters
• Axle offers convenient wheel bearing hourmeter compressor
lubrication through zerk fittings • Rocker type engine start switch, with * CAT only.
emergency stop
Delivery Rated Pressure Designated Weight Weight Length Length Width Height Track Tire Size
@ Rated Pressure Range Model (wet) (dry) (drawbar) (canopy) Width (load range)
Pressure psig psig lbs lbs in in in in in
bar bar kg kg mm mm mm mm mm
185 acfm 100 80–125 2-Wheel 2130 1990 130.8 69.5 59.2 53.8 50.9 ST 175/80D 13
87 l/s 7 5.5–8.5 966 903 3322 1765 1504 1368 1294
5.2 m3/min Less 1885 1745 – 69.5 40.9 41.7 – –
Running Gear 855 792 – 1765 1040 1060 – –
Engine Engine Engine Displacement Cylinders Bore and Stroke Rated Speed Rated Power
Make Type Model in3 in rpm hp
cc mm kW
Caterpillar Diesel C2.2 134 4 3.30 X 3.94 2800 61
(Interim Tier 4 emissions compliant) 2196 84 X 100 45.5
John Deere Diesel 4024T 149 4 3.39 X 4.13 2800 60
(Tier 2 emissions compliant) 2442 86 X 105 44.7
Capacity per CAGI/PNEUROP PN2CPTC3. (Annex D to ISO 1217)
Sullair Corporation is a subsidiary of Hamilton Sundstrand Corporation, The paper used in printing his literature was manufactured
Sullair Corporation using recycled fiber, e ther pre-consumer or post-consumer
a United Technologies Company. (NYSE: UTX)
3700 East Michigan Boulevard © Copyright 2011 Sullair Corporation. All rights reserved. waste, therefore less harmful to the envi onment because less
Michigan City, IN 46360 The color green is a registered trademark of Sullair Corporation. virgin fiber is used, thereby reducing tree ha vesting, water
usage, energy consumption, emission of greenhouse gases
Telephone: 219-879-5451 Specifications subject to change without notice.
and pollution.
www.sullair.com SSL-1155 1101R5