Professional Documents
Culture Documents
Memorias Analítico D 1.5 L 10.0m
Memorias Analítico D 1.5 L 10.0m
Pile verification
Input data
Project
Part : GAMEZA
Description : PUENTE SASA
Customer : GOBERNACIÓN DE BOYACÁ
Author : PPICO
Date : 10/02/2021
10,00
+z
20,00
Settings
(input for current task)
Materials and standards
Concrete structures : ACI 318-11
Piles
Analysis for drained conditions : NAVFAC DM 7.2
Load curve : linear (Poulos)
Horizontal bearing capacity : Elastic subsoil (p-y method)
Verification methodology : Safety factors (ASD)
Safety factors
Permanent design situation
Safety factor for compressive pile : SFcp = 2,00 [–]
Safety factor for tensile pile : SFtp = 3,00 [–]
1
[GeoStructural Analysis - Piles | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
PPICO GAMEZA
jef d K cu a
No. Name Pattern
[°] [°] [–] [kPa] [–]
1 COLUVIAL 38,00 - - - -
Soil parameters
COLUVIAL
Unit weight : g = 19,00 kN/m3
Poisson's ratio : n = 0,25
Deformation modulus : Edef = 70,00 MPa
Saturated unit weight : gsat = 21,00 kN/m3
Type of soil : cohesionless
Modulus of nh = 12,00 MN/m3
horiz.compressibility :
Angle of internal friction : jef = 38,00 °
Geometry
Pile profile: circular
Dimensions
Diameter d = 1,50 m
Length l = 10,00 m
Location
Off ground height h = 0,50 m
Depth of finished grade hz = 0,50 m
Technology: Bored piles
Modulus of subsoil reaction considered according to CSN 731004.
Material of structure
Unit weight g = 23,56 kN/m3
Analysis of concrete structures carried out according to the standard ACI 318-11.
2
[GeoStructural Analysis - Piles | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
PPICO GAMEZA
1 20,00 COLUVIAL
2 - COLUVIAL
Load
Load N Mx My Hx Hy
No. Name Type
new change [kN] [kNm] [kNm] [kN] [kN]
1 YES Load No. 1 Design 3500,00 0,00 0,00 0,00 0,00
2 YES Load No. 1 - service Service 2916,67 0,00 0,00 0,00 0,00
Ground water table
The ground water table is at a depth of 0,10 m from the original terrain.
Global settings
Analysis of vertical bearing capacity : analytical solution
Analysis type : analysis for drained conditions
Verification No. 1
Verification of pile bearing capacity according to NAVFAC DM 7.2 - partial results
Computation of pile base bearing capacity:
The soil under the base is cohesionless
Coefficient of bearing capacity Nq = 43,00
Area of pile transverse cross-section Ap = 1,77E+00 m2
Pile ultimate skin resistance capacity:
3
[GeoStructural Analysis - Piles | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
PPICO GAMEZA
Verification No. 1
Analysis of load settlement curve - input data
Layer Es
No. [MPa]
1 70,00
Type of pile : end-bearing pile
Maximum pile settlement slim = 40,0 mm
4
[GeoStructural Analysis - Piles | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
PPICO GAMEZA
8,0
16,0
24,0
32,0
40,0
s [mm] Ryu Rbu
Verification No. 1
Input data to compute pile horizontal bearing capacity
Analysis carried out for inserted displacement loading prescribed at pile head:
Forced displacement: 40,0 mm
Forced rotation: not inserted
Horizontal bearing capacity verified in the direction of maximum load effect.
5
[GeoStructural Analysis - Piles | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
PPICO GAMEZA
6
[GeoStructural Analysis - Piles | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
PPICO GAMEZA
-40,0 -1584,16
4218,24
1080,71
76,00 7,7
7
[GeoStructural Analysis - Piles | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]