Professional Documents
Culture Documents
5-V Low Drop Fixed Voltage Regulator TLE 4275: Features
5-V Low Drop Fixed Voltage Regulator TLE 4275: Features
Features
• Output voltage 5 V ± 2%
• Very low current consumption
• Power-on and undervoltage reset
• Reset low down to VQ = 1 V P-TO220-5-11
• Very low-drop voltage PG-TO220-5-11
• Short-circuit-proof
• Reverse polarity proof
• Suitable for use in automotive electronics
• ESD protection > 4 kV
• Green Product (RoHS compliant) version of TLE 4275
• AEC qualified P-TO252-5-11
PG-TO252-11
Functional Description
The TLE 4275 is a monolithic integrated low-drop
voltage regulator in a 5-pin TO-package. An input
voltage up to 45 V is regulated to VQ,nom = 5.0 V. The IC
is able to drive loads up to 450 mA and is short-circuit
proof. At overtemperature the TLE 4275 is turned off by P-TO263-5-1
P-TO220-5-12
PG-TO220-5-12
Type Package
TLE 4275 PG-TO220-5-11 (RoHS compliant)
TLE 4275 D PG-TO252-5-11 (RoHS compliant)
TLE 4275 G PG-TO263-5-1 (RoHS compliant)
TLE 4275 S PG-TO220-5-12 (RoHS compliant)
Circuit Description
The control amplifier compares a reference voltage to a voltage that is proportional to the
output voltage and drives the base of the series transistor via a buffer. Saturation control
as a function of the load current prevents any oversaturation of the power element. The
IC also incorporates a number of internal circuits for protection against:
• Overload
• Overtemperature
• Reverse polarity
PG-TO252-5-11
GND
PG-TO220-5-11 PG-TO220-5-12
1 5
Ι RO D Q
AEP02580
PG-TO263-5-1
Ι GND Q
RO D Ι GND Q
IEP02527 RO D
AEP02756
Ι GND Q
RO D
IEP02528
Temperature Saturation
Sensor Control and
Protection
Circuit
1 5
I Q
Buffer
Bandgap
Reference
4 Reset
D Generator
2
RO
3
AEB02425
Note: Maximum ratings are absolute ratings; exceeding any one of these values may
cause irreversible damage to the integrated circuit.
Table 3 Operating Range
Parameter Symbol Limit Values Unit Remarks
Min. Max.
Input voltage VI 5.5 42 V –
Junction temperature Tj -40 150 °C –
Thermal Resistance
Junction case Rthjc – 4 K/W –
Junction ambient Rthj-a – 53 K/W TO2631)
Junction ambient Rthj-a – 78 K/W TO2521)
Junction ambient Rthj-a – 65 K/W TO220
1) Worst case, regarding peak temperature; zero airflow; mounted on a PCB FR4, 80 × 80 × 1.5 mm3, heat sink
area 300 mm2
Table 4 Characteristics
VI = 13.5 V; -40 °C < Tj < 150 °C (unless otherwise specified)
Parameter Symbol Limit Values Unit Measuring
Min. Typ. Max. Condition
Output
Output voltage VQ 4.9 5.0 5.1 V 5 mA < IQ < 400 mA
6 V < VI < 28 V
Output voltage VQ 4.9 5.0 5.1 V 5 mA < IQ < 200 mA
6 V < VI < 40 V
Output current IQ 450 700 – mA –
limitation1)
Current consumption; Iq – 150 200 µA IQ = 1 mA;
Iq = II - IQ Tj = 25 °C
Current consumption; Iq – 150 220 µA IQ = 1 mA;
Iq = II - IQ Tj ≤ 85 °C
Current consumption; Iq – 5 10 mA IQ = 250 mA
Iq = II - IQ
Current consumption; Iq – 12 22 mA IQ = 400 mA
Iq = II - IQ
Drop voltage1) Vdr – 250 500 mV IQ = 300 mA;
Vdr = VI - VQ
Load regulation ∆VQ – 15 30 mV IQ = 5 mA to 400 mA
Line regulation ∆VQ -15 5 15 mV ∆Vl = 8 V to 32 V
IQ = 5 mA
Power supply ripple PSRR – 60 – dB fr = 100 Hz;
rejection Vr = 0.5 Vpp
Temperature output dVQ/dT – 0.5 – mV/K –
voltage drift
II IQ
I Q
1 5
CI 1 CI 2 CQ
1000 µF 100 nF 22 µF R ext
5 kΩ
IRO
D RO
VI 4 2 VQ
3
ID, d ID, c GND
VRO
IGND
VD CD
47 nF
AES02472
VΙ
t
< t rr
VQ
V Q, rt
d V Ι D,c t
VD =
dt CD V DU
V DRL
t rr
t rd t
VRO
t
Power-on-Reset Thermal Voltage Dip Undervoltage Secondary Overload
Shutdown at Input Spike at Output AED03010
4.9 600
4.8 400
4.7 200
4.6 0
-40 0 40 80 120 ˚C 160 -40 0 40 80 120 ˚C 160
Tj Tj
3.2
6
R L = 25 Ω
3.1
4
3.0
2
2.9
-40 0 40 80 120 C 160 0
Tj 0 2 4 6 8 V 10
VΙ
0.8
T j = 125 ˚C 50
25 ˚C
0.6 40
30
0.4 VΙ = 13.5 V
20
0.2
10
0 0
0 10 20 30 40 V 50 0 100 200 300 400 mA 600
VI ΙQ
600
2
500
T j = 125 ˚C
25 ˚C
400
VΙ = 13.5 V
300
1
200
100
0 0
0 20 40 60 80 mA 120 0 200 400 600 mA 1000
ΙQ IQ
VI = 13.5 V
4 VD = 1 V
0
-40 0 40 80 120 ˚C 160
Tj
3.0
2.5
VΙ = 13.5 V
2.0
V DU
1.5
1.0
0.5
V DRL
0
-40 0 40 80 120 ˚C 160
Tj
Package Outlines
10 ±0.2
A
9.8 ±0.15
8.5 1) 4.4
3.7-0.15 1.27 ±0.1
1)
15.65 ±0.3
2.8 ±0.2
13.4
17±0.3
9.25 ±0.2
0.05
8.6 ±0.3
10.2 ±0.3
3.7 ±0.3
C
You can find all of our packages, sorts of packing and others in our
Infineon Internet Page “Products”: http://www.infineon.com/products.
6.5 +0.15
-0.05
A
5.7 MAX.
1) 2.3 +0.05
-0.10
0.9 +0.20
-0.01
0.8 ±0.15
6.22 -0.2
9.98 ±0.5
0...0.15
0.51 MIN.
0.15 MAX.
per side 5 x 0.6 ±0.1 0.5 +0.08
-0.04
1.14
0.1 B
4.56
0.25 M A B
GPT09527
You can find all of our packages, sorts of packing and others in our
Infineon Internet Page “Products”: http://www.infineon.com/products.
4.4
10 ±0.2
1.27 ±0.1
0...0.3
A B
8.5 1)
0.05
1±0.3
2.4
7.55 1)
9.25 ±0.2
0.1
(15)
2.7 ±0.3
4.7 ±0.5
0...0.15
5 x 0.8 ±0.1 0.5 ±0.1
4 x 1.7
8˚ MAX.
0.25 M A B 0.1 B
1) Typical
Metal surface min. X = 7.25, Y = 6.9
All metal surfaces tin plated, except area of cut. GPT09113
GPT09113
You can find all of our packages, sorts of packing and others in our
Infineon Internet Page “Products”: http://www.infineon.com/products.
10 ±0.2
A
9.8 ±0.15 B
1)
8.5 4.4
3.7 -0.15 1.27 ±0.1
1)
15.65 ±0.3
2.8 ±0.2
13.4
17±0.3
9.25 ±0.2
0.05
11±0.5
13 ±0.5
Typical
1) All metal surfaces tin plated, except area of cut.
GPT09065
You can find all of our packages, sorts of packing and others in our
Infineon Internet Page “Products”: http://www.infineon.com/products.
TLE 4275
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values
stated herein and/or any information regarding the application of the device, Infineon Technologies hereby
disclaims any and all warranties and liabilities of any kind, including without limitation warranties of
non-infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.