Professional Documents
Culture Documents
2020-21
Submitted By:
_______________________________
Roll No.: Enrollment No.
G. H. RAISONI POLYTECHNIC, JALGAON
A Project Report
On
GEAR MANUFACTURING”
Under subject ADVANCHED MANUFACTURING PROCESS
Submitted in partial fulfillment of the requirements for the 5th semester
Diploma in Mechanical Engineering
For the Academic Year
2020-2021
Submitted By,
1. Vishal Prakash Rane
2. Ganesh nimba sonawane
3. Deepak Arjundas Sundrani
4. Rushikesh rajusing chaudhari
CERTIFICATE
This is to certify that the project entitled “Gear manufacturing” is
study work carried out by Vishal Prakash Rane, Deepak Arjundas Sundrani,
Ganesh nimba sonawane, Rushikesh rajusing chaudhari in partial
fulfillment for the award of Diploma in Mechanical Engineering in
G.H.Raisoni Polytechnic, Jalgaon during year 2020-2021.
Seal of
Institution
G. H. RAISONI POLYTECHNIC, JALGAON
Week
Discussion & Details Date
No.
1 Discussion on concept of Micro project
Finalization of group and Project topic with
2
Project proposal submission
3 Preliminary discussion with guide
4 Information collected
5 Discussion on Progress in Micro project
6 Solving student queries
7 Rough report writing
8 Final report writing
9 Presentation and oral
10 Final submission with Project report.
Sign of Faculty
G. H. RAISONI POLYTECHNIC, JALGAON
ANNEXURE-I
Suggestive Rubric for Evaluation of a Micro Project
Academic Year: 2020-2021 Program: MECHANICAL CourseCode: 22563
Indicators for different level of performance
Sr.
Criteria (Evaluation Scale -1 to 3)
No.
Poor(1) Poor(1) Poor(1)
Appropriate, well
Content Quality of Inappropriate or Appropriate and average
3 organized and Good
Project Poor quality content quality content
quality content
ANNEXURE II
Evaluation Sheet for the Micro Project
Name of Institute: G.H.RAISONI POLYTECHNIC Code of Institute: 1176
Academic Year: 2020-2021 Name of Faculty: Mr. Devanand tayade
Course: ME Course Code:22563 Semester:5th
(C) Outcomes in
AffectiveDomain:……………………………………………………………………………………
………………………………………………………………………………………………………..
Comments/Suggestions about team work/leadership/inter-personal communication (if any):
………………………………………………………………………………………………………
…
INDEX
2 PROJECT:-GEAR MANUFACTURING 8
7
GEAR HOBING 12
9 GEAR GRINDING 13
10 GEAR LAPING 14
12 APPLICATION 15
13 REFERANCE 16
G. H. RAISONI POLYTECHNIC, JALGAON
ACKNOWLEDGEMENT
3] ROLLING: - Both hot and cold rolling process are used to make
gears. In hot rolling, gear blank is rolled against a master gear (hardened
steel gear) to produce desired teeth on its periphery. The cold rolling
process is similar to hot rolling but requires high pressure.
from material like AC, brass and bronze. In this process are heated gear
blank is placed inside the cylinder and pressed from one end with a ram.
The other end carries a die similar to the shape of the required gear. The
method is used for mass production.
shape and size along its periphery. In this method the metal is removed
i. Type of gear
ii. Size of gear
iii. Quantity required
iv. Accuracy desired
v. Cost and availability of equipment
i. For smooth running, good performance and long service life, the
gears need
ii. To achieve be accurate in dimensions and forms.
iii. To achieve high surface finish.
iv. To be hard and wear resistive at their tooth flanks.
v. To remove inaccuracies produced through gear generating process.
APPLICATION
1) Automobile
2) Industrial industries
3) To transfer a motion from one shaft to another shaft
4) It also used to transmit a power from one shaft to anot
G. H. RAISONI POLYTECHNIC, JALGAON
REFERANCE
• NIRALI PRAKASHAN
• SLIDESHARE
• WEKIPEDIA