Professional Documents
Culture Documents
Total 259.500
Total 1.000
4b Formica finish vision panel
shutter 900mm wide
Inspection room D-6A ( Solid with
Vision) 909mm 1 1.00 1.00 1.00
Open office D- 5 ( Solid with
Vision) 909mm 2 1.00 1.00 2.00
Meeting room D - 6 ( Solid with
Vision) 909mm 1 1.00 1.00 1.00
Total 4.000
Total 1.000
Total 4.000
Total 4.000
Total 2.000
Total 140.070
Total 6.000
Total 135.000
Total 2,093.250
Total 104.770
Total 44.000
25 MS Sliding door
Total 254.288
26 Internal Paint
Total ###
26b Enamel paint.
Total 2,818.460
External Walls 1 - 9/ C
Total 15,398.68
THE
K&T
ENGINEERIN ENGINEERS &
S-# DESCRIPTION ASSOCIATESA REMARKS
G AMOUNT CONSTRUCTO
MOUNT
RS AMOUNT
Structure & Architectural work
1 Structural Warehouse 1,276,670 1,491,440 1,379,775
14
COMPARATIVE BILL OF QUANTITIES
PROJECT : ATLAS WAREHOUSE AT PORT QASIM
THE ENGINEERS
& K & T ASSOCIATES
OWNER : ATLAS GROUP CONSTRUCTORS
STRUCTURAL WORK ENGINEERING SHAHID MAJEED TAHA CHOHAN
S.#. DESCRIPTION UNIT Qty RATE AMOUNT RATE AMOUNT RATE AMOUNT
1 Dismantling Work
Remove existing, floor, building and loose debris from site including Bushes, shrubs,
trees, etc remove from the site. Hand over all salvageable items to Owner's representative.
Remove top soil of 9”/ 225mm from all surfaces and its disposal as required by law and
away from the site
a Dismantling column & beam Cft 120 110 13,200.00 85 10,200.00 100 12,000.00
b Dismantling Ramp side 200mm thick edges Sft 21 60 1,260.00 50 1,050.00 55 1,155.00
c Dismantling paver for pad Sft 825 15 12,375.00 35 28,875.00 20 16,500.00
d Cutting PEB sheets Sft 30 45 1,350.00 175 5,250.00 75 2,250.00
e Remove existing road blocker Job 1 40,000 40,000.00 55,000 55,000.00 45,000 45,000.00
2 Excavation
Visit site and examine the soil condition in order to determine the nature of the ground to
be excavated. Excavation should be carried out in accordance with excavation plans and
section and as directed by the site Engineer. The major portion of excavation should be
carried out by mechanical excavator’s including leveling, trimming, and finishing to the
required levels. Shoring should be put in place where required during excavation to
protect workers, adjacent paving, structures and utilities. The term shoring shall also be
deemed to cover whatever methods the Contractor establishes with prior approval of the
Project Engineer.
Including mechanical compaction up to 98%. Excavated earth/material should be disposed
off outside the Municipal Limits or as directed by the Project Engineer.
Excavation for ramp beam Cft 220 25 5,500.00 30 6,600.00 25 5,500.00
3 Earth Filling
Provide and fill the approved selected material in excavated area. The filling material
should be free from slurry, mud, organic or other unsuitable matter and capable for
compaction by ordinary means. The filling work should include loading, unloading,
transporting, placing, stocking, spreading of earth, watering, compacting, ramming, rolling
etc complete in all respects. Material for filling should be placed in layers of 200mm
measured as compacted material and saturated with sufficient water and compacted to
produce in-situ density not less than 95% of the maximum density optimum moisture
content. Complete in all respects and conforming to the requirements of drawings,
specifications and to the entire satisfaction of the Project Engineer. ( Recommended
Imported Earth Morum / Gerra / Khaka )
Cft 400 45 18,000.00 50 20,000.00 48 19,200.00
Mix with mixing machine including form work centering and shuttering shall be made
with steel plate provided as required, as per standard specifications. (Excluding cost of
steel reinforcement but including the cost of sleeves and all embedded items)
a For Pad Cft 810 550 445,500.00 625 506,250.00 575 465,750.00
b For ramp beam Cft 115 550 63,250.00 625 71,875.00 600 69,000.00
SUPER STRUCTURE
7 Cement concrete having 4000 psi cylindrical strength
Provide and lay, straight or curved cast-in place designed mix reinforced structural cement
concrete, Minimum cylindrical strength of concrete should be 4000/psi on 28 days, use
OPC cement, including the addition of admixture to achieve the required strength if felt
necessary by the structural consultant. Water should be clean and free from alkaline &
acidic matters and suitable for drinking purposes.
Mix with mixing machine including form work centering and shuttering shall be made
with steel plate provided as required, as per standard specifications.
a Column Cft 15 625 9,375.00 675 10,125.00 625 9,375.00
COMPARATIVE BILL OF QUANTITIES
PROJECT : ATLAS WAREHOUSE AT PORT QASIM
THE ENGINEERS
& K & T ASSOCIATES
OWNER : ATLAS GROUP CONSTRUCTORS
STRUCTURAL WORK ENGINEERING SHAHID MAJEED TAHA CHOHAN
S.#. DESCRIPTION UNIT Qty RATE AMOUNT RATE AMOUNT RATE AMOUNT
8 Cement concrete having 3000 psi cylindrical strength
Provide and lay, straight or curved cast-in place designed mix reinforced structural cement
concrete, Minimum cylindrical strength of concrete should be 3000/psi on 28 days, use
OPC cement, including the addition of admixture to achieve the required strength if felt
necessary by the structural consultant.. Water should be clean and free from alkaline &
acidic matters and suitable for drinking purposes.
Mix with mixing machine including form work centering and shuttering shall be made
with steel plate provided as required, as per standard specifications.
i RCC Beam Cft 40 650 26,000.00 650 26,000.00 650 26,000.00
SOG Floor for ramp Cft 85 375 31,875.00 500 42,500.00 400 34,000.00
Screed on pad Sft 540 145 78,300.00 145 78,300.00 135 72,900.00
10 External Plaster
Provide and Apply 20mm thick internal plaster, first coat 10mm thick ratio 1:5 cement,
sand mortar and second coat 10mm thick plaster or specified thickness and layers on all Sft 300 55 16,500.00 55 16,500.00 50 15,000.00
externals surfaces.
METAL WORKS
11 Security Roller Shutters
Provide and install Aluminum anodized finish ( Including Cost of Motor ) from Malaysia,
security roller shutter , Electric Operated vertically folded including G.I. channel with
rubber gas kit, end caps, spring etc complete as per approved by the architect
(Recommended Supplier: The Protectors). Complete in all respects and conforming to the
requirements of drawings, and to the entire satisfaction of the Project consultant.
Sft 220 1,650 363,000.0 2,150 473,000.00 2,000 440,000.00
COMPARATIVE BILL OF QUANTITIES
PROJECT : ATLAS WAREHOUSE AT PORT QASIM
THE ENGINEERS
& K & T ASSOCIATES
OWNER : ATLAS GROUP CONSTRUCTORS
STRUCTURAL WORK ENGINEERING SHAHID MAJEED TAHA CHOHAN
S.#. DESCRIPTION UNIT Qty RATE AMOUNT RATE AMOUNT RATE AMOUNT
12 External Paint
Provide and apply four coats of weather shield paint of approved manufactured (ICI /
Berger ) to external surfaces of the building including grinding, rubbing, cleaning and
preparation of the base plus the cost of scaffolding or suspended platform wherever
required complete in all respects. conform to the requirements of drawings, and to the
entire satisfaction of the Project consultant. Sft 500 40 20,000.0 45 22,500.00 45 22,500.00
ROOF SCREED
3 -
3 -
3 -
3 -
3 -
3 -
3 -
3 -
3 -
main Bars 3 -
SIZE OF BAR 1/4" 3/8" 1/2" 5/8" 3/4" 1" TOTAL WEIGHT
Page 20 of 32
Kg/Rft 0.076 0.171 0.303 0.473 0.681 1.21
Kg/METER 0.248 0.56 0.994 1.552 2.235 3.975
LENGTH IN Rft. -
WEIGHT OF BARS (IN Kg) - - - - - - -
___________________ ___________________
Page 21 of 32
BAR BENDING SCHEDULE
PLINTH BEAMS
Rings
500 + 500 + 550
+550+150 +150+100+100 3 -
Distribution 3 -
main (3+3) 5 -
main 4 -
-
Column Pedestal 4 -
Ring (1300) 3 -
Column 4 -
Ring (1300) 3 -
-
Bracing beam 4 -
Rings 3 -
SOG Dowels 3 -
SIZE OF BAR 1/4" 3/8" 1/2" 5/8" 3/4" 1" TOTAL WEIGHT
Page 22 of 32
Kg/Rft 0.076 0.171 0.303 0.473 0.681 1.21
Kg/METER 0.248 0.56 0.994 1.552 2.235 3.975
LENGTH IN Rft. - - -
WEIGHT OF BARS (IN Kg) - - - - - - -
___________________ ___________________
Page 23 of 32
S.No DESCRIPTION UNIT QTY RATE AMOUNT
1 PVC Skirting
Provide and fix PVC skirting 3" high as per approved design/color complete in
all respects and conform to the requirements of drawings, and to the entire
satisfaction of the Project consultant. (Recommend vendor: Modul Art or
equivalent) Rft 1,050 -
3 Door Frames
Provide, make and Install Beech wood Door frame to take solid core or glazed
shutters. The Beech wood should be of the best quality well seasoned and free
from saps, knots, warps and other defects. The frame should be properly
framed and joined by mortise and tenon, joint with hard wooden pins and the
joints should be coated with white lead before being fitted together. The frame
should be of section as per Drawing. All faces other then canceled once should
be painted with a primer coat before fixing in position etc also included
Polyurethane polish finish, rebates, beading/architraves as required. Complete
in all respects and conforming to the requirements of drawings, and to the
entire satisfaction of the Project consultant. All wooden material to be properly
treated with termite proofing chemical recommended: solignum by jaffar
brothers.
6 Door Locks
Provide and install door lock lever type mortise lock with 5 pin cylinder and
lever in SS satin finish. Approved manufacturer: Bonco or approved
equivalent. Conforming to the requirements of drawings, and to the entire
satisfaction of the Project consultant. (Basic Rate Rs. 4500/-) (Recommend
vendor: JB saeed) No 20 -
Suite No. 209, 2nd Floor, Almas Heights, PECHS, Block-2, Shahrah-e-Faisal, KarachiTel: +92 21 34327838 / +92 21
4229120 Cell: 0333-2019706
S.No DESCRIPTION UNIT QTY RATE AMOUNT
7 Door Closers
Provide and install imported sprayed silver ( New star) make door closer as
approved and conforming to the requirements of drawings, and to the entire
satisfaction of the Project consultant. (Basic Rate Rs. 4500/-) (Recommend
vendor: JB saeed) No 14 -
Suite No. 209, 2nd Floor, Almas Heights, PECHS, Block-2, Shahrah-e-Faisal, KarachiTel: +92 21 34327838 / +92 21
4229120 Cell: 0333-2019706
S.No DESCRIPTION UNIT QTY RATE AMOUNT
a) Infill Panels of Mineral Fiber 5/8" thick with revealed joint made by Sft 1,175 -
Daiken imported from Japan or equivalent.
Sft 1,340 -
20 Glass Partition
Provide and Install 12mm thick flot glass partition from floor to ceiling with
3M safety film hang with MDF boxing on top and fixed on floor by 100mm x
50mm and 2mm section in champagne anodized finish with 8mm thick clear
glass, as shown on the drawings, with 2mm thickness of section and 20 micron
anodic film of approved make or its equivalent make as indicated on the
drawings and approved by the Project Engineer , using stainless steel screw,
glazed, PVC glazing channel weathered strip between open able portion and
aluminum trimming complete with handle, lock, application of silicone for
joints etc. complete in all respects and conform to the requirements of
drawings, specifications and to the entire satisfaction of the Project Consultant.
Recommended manufacture:- ALCOP and PAKISTAN CABLE Sft 30 -
Suite No. 209, 2nd Floor, Almas Heights, PECHS, Block-2, Shahrah-e-Faisal, KarachiTel: +92 21 34327838 / +92 21
4229120 Cell: 0333-2019706
S.No DESCRIPTION UNIT QTY RATE AMOUNT
23 Porcelain Tiles
Provide & Fix matt porcelain tile 400 x 400mm or equivalent with other colour
border patterns, set in cement sand mortar (1:4) and filling the joints with neat
cement slurry, using matching colour / pigment, at any height or any floor,
over including 50mm to 75mm thick 1:2:4 cement concrete bedding of groove
key to sub structure, leveling as per slope, curing, cleaning etc. complete in all
respects and conform to the requirements of drawings, and to the entire
satisfaction of the Project consultant. Recommended (Basic Rate: 1800/ Meter)
On Floor with 50 to 75mm C.C 1:2:4 bed to required level Sft 2,350 -
On wall with 12mm thick base plaster Sft 500 -
24 Marble
Provide and Fix selected Peralino marble 20mm thick, pre-polished with
chamfered and fine edges on 12mm thick 1:6 cement and sand bed to required
surface as per drawing Including with grout (Stile) neat and clean etc. complete
in all respect and conforming to the requirements of drawings, and to the entire
satisfaction of the Project Consultant. .
Marble fixing on Door Threshold Rft 50 -
Window sill Rft 210 -
26 Internal Paint
Provide and apply 4 coats of paint to internal plastered walls, partitions,
structural ceiling including grinding, cleaning, rubbing, sanding, filling and
preparing base with primer coat; all to be done in strict accordance with the
( ICI / Berger ) manufacturer's specification etc. complete in all respects and
conforming to the requirements of drawings, specifications and to the entire
satisfaction of the Project consultant. .
Distemper Paint. Sft 10,500 -
Enamel paint. Sft 5,000 -
Matt finish Sft 9,500 -
27 External Paint
Provide and apply four coats of paint of approved manufactured to external
surfaces of the building including grinding, rubbing, cleaning and preparation
of the base plus the cost of scaffolding or suspended platform wherever
required etc. complete in all respects and conforming to the requirements of
drawings, specifications and to the entire satisfaction of the Project
consultant. . Sft 8,900 -
Suite No. 209, 2nd Floor, Almas Heights, PECHS, Block-2, Shahrah-e-Faisal, KarachiTel: +92 21 34327838 / +92 21
4229120 Cell: 0333-2019706
S.No DESCRIPTION UNIT QTY RATE AMOUN
T
1 Installation of Air Conditioning Unit
Installation of air conditioning units with commissioning & testing.
Complete and conform to the requirements of drawings, and to the entire
satisfaction of the Project consultant.
Copper piping 3/8 , 5/8 " dia for 1.5 & 2.0 Ton Unit Rft 900 -
Total Amount -
Suite No. 209, 2nd Floor, Almas Heights, PECHS, Block-2, Shahrah-e-Faisal, KarachiTel: +92 21 34327838 / +92 21 4229120 Cell: 0333-2019706
No. DESCRIPTION UNIT QTY RATE AMOUNT
1 English type Water Closet
Provide and Fix best quality European type glazed earthenware water closet
(Make Porta with Master or equivalent fitting ) with cistern with seat cover
including fix inlet pipe, cistern, lid, cistern kit, stop cock deluxe and
accessories & fitting materials, making requisite No. of holes in walls and floor
for pipe connection and making good with approved material and conforming
to the requirements of drawings, and to the entire satisfaction of the Project
consultant.
Nos. 2 15,000 30,000
3 Urinal
Provide and Fix best quality flat back lipped front urinal (Make Porta with
Master or equivalent fitting ) of glazed earthenware including fix 3/4" dia C.P
flush valve, a pet cock CI or WI brackets, standard flush pipe with fittings,
bottle trap connection. Make required holes in walls & floors for pipe
connections and make good with approved material and conforming to the
requirements of drawings, and to the entire satisfaction of the Project
consultant.
15,000
4 Semi Pedestal Wash Basin
Provide and Fix best quality glazed earthenware wash basin (Make Porta with
Master or equivalent fitting ) with single hole chromium plated mixer tap 15
mm (1/2"), two tee stop cocks, flexible pipes, bottle trap waste plug with chain,
silicon, sealant, waste pipe. Make requisite holes in walls & floor for pipe
connections and make good with approved material and conforming to the
requirements of drawings, and to the entire satisfaction of the Project
consultant.
Nos 8 21,500 172,000
5 Floor Drains
Provide and Fix floor drain / Floor Gully of approved design grating (Make
Dadex), including requisite number of holes in wall plinth or floor for pipe
connection and making good the same as necessary with non-shrink grout to
the structure complete including gasket and clamp complete and conforming to
the requirements of drawings, and to the entire satisfaction of the Project
consultant. Nos. 17 3,000 51,000
7 Soap Dispenser
Provide and Fix Soap Dispenser size as per drawing with C.P screws and
conforming to the requirements of drawings, and to the entire satisfaction of Nos. 4 4,500 18,000
the Project consultant.
8 Muslim Shower
Provide and Fix Bibcock with Muslim showers(Make Master or equivalent ) ,
complete with Tee stop cock and controlled spray head and conforming to the
requirements of drawings, and to the entire satisfaction of the Project
consultant. Nos. 2 5,000 10,000
9 Shower Head
Provide and Fix long shower head (Make Master or equivalent ) and
conforming to the requirements of drawings, and to the entire satisfaction of Nos. 8 1,500 12,000
the Project consultant.
10 Mirror
Provide and Fix "Belgium glass" with chromium plated screws and 3.2 mm
thick commercial back ply including fixing of packing tape back of mirror and
white silicon fill around of mirror etc. complete and conforming to the
requirements of drawings, and to the entire satisfaction of the Project
consultant. Sft 70 600 42,000
Suite No. 209, 2nd Floor, Almas Heights, PECHS, Block-2, Shahrah-e-Faisal, KarachiTel: +92 21 34327838 / +92 21
4229120 Cell: 0333-2019706
No. DESCRIPTION UNIT QTY RATE AMOUNT
11 Long Bib Cock
Provide and Fix long bib cock (Make Master or equivalent ) and conforming
to the requirements of drawings, and to the entire satisfaction of the Project Nos. 25 3,000 75,000
consultant.
12 Coat Hook
Provide and Fix Best quality chromium plated coat hook double in all W.C and
conforming to the requirements of drawings, and to the entire satisfaction of
the Project consultant.
Nos. 25 1,500 37,500
13 Clean Out
Provide and fix upvc clean out (Floor / ceiling type, Make Dadex) with s/s
cover, marking requisite number of holes in walls, Plinth or floor for pipe
connection and making good the same as necessary to the structure including
rubber gasket and clamp etc. and conforming to the requirements of drawings,
and to the entire satisfaction of the Project consultant.
Nos. 5 2,500 12,500
15 Gate Valve
Providing, Fixing of full way gate valves of bronze trim up to 2” (50 mm) dia
with threaded ends cast iron body bronze trim flanged ends for 3" dia (75 mm)
and above or equivalent or similar for 125 psi together with all additional
material required for a complete installation as describe in the specification
and as shown on drawings and to the entire satisfaction of the Project
consultant.
50 mm dia Nos. 2 5,500 11,000
25 mm dia Nos. 1 4,500 4,500
20 mm dia Nos. 6 4,000 24,000
16 UPVC Pipes
Providing, Fixing in position uPVC pipes (Make Dadex) push fit type for soil,
waste water & vent pipe embedded in floor and wall or suspended from slab or
clamped to wall including plugs, clamps, hanger collars, supports, specials
(bend, tees, y-tee etc.) making requisite number of holes in walls and floors
and filling holes around the pipe with non shrink grout of approved make
where required and making good the same as necessary to the structure
labeling testing to 6.5 ft. water height complete. and conforming to the
requirements of drawings, and to the entire satisfaction of the Project
consultant.
17 Upvc Cowl
Provide and fix Upvc cowl (Make Dadex) for vent pipe of the following dia
including all accessories complete.
Suite No. 209, 2nd Floor, Almas Heights, PECHS, Block-2, Shahrah-e-Faisal, KarachiTel: +92 21 34327838 / +92 21
4229120 Cell: 0333-2019706
No. DESCRIPTION UNIT QTY RATE AMOUNT
18 Gully Trap
Provide and fix gully trap Alpine make 200x200mm cast iron frame and cover
with R.C.C gully trap chambers, including excavation, backfilling, masonry,
plaster internally and externally vitreous China trap etc. complete and
approved by the Engineer and conforming to the requirements of drawings,
and to the entire satisfaction of the Project consultant.
No 2 9,000 18,000
20 R.C.C MANHOLE
Provide and make manhole depth as per drawing including excavation, 3"
thick 1:3:6 lean, R.C.C 6" thick bed in 1:1½ : 3, R.C.C 6" thick wall above
bed, 1" thick plaster 1:4 ratio Internal & External sides of wall, Make chamfer
in 1:1½ : 3 slop as per drawing, plaster with puddlo in 1:4 ratio internally and
8" thick top slab, Plaster with puddlo work av depth4'-6" (total 50 Sft inside
Plaster). Main Hole cover Filling & fixing 24" x 24" cover C.C Smooth finish
with the provision of conduiting or other embedded items, removing excess
material etc. complete in all respect and conforming to the requirements of
drawings, and to the entire satisfaction of the Project consultant. (including
steel as per drawing)
21 Fiber Tank
Provide and Fix Horizontal Type Fiber Glass Tank ( Make Master ) 5000
gallon along all accessories and conforming to the requirements of drawings,
and to the entire satisfaction of the Project consultant.
No 3 200,000 600,000
Suite No. 209, 2nd Floor, Almas Heights, PECHS, Block-2, Shahrah-e-Faisal, KarachiTel: +92 21 34327838 / +92 21
4229120 Cell: 0333-2019706
INTER DEVELOPER
Item No Description Unit Qty Rate Amount
1.0 NOS 72.00 2,450 ###
A: Material
Quantity
Item Description Unit Rate Amount Gross
Actual Wastage Total
B: Labour
Quantity
Item Description Unit Rate Amount Gross
Actual Wastage Total
1 labour 2.00 - 0.50 1,200.00 600.00
2
3 -
D: Others
Item Description % Amount Gross
1 Overheads 10.00 910.00 10,010.00
2 Profit ### 2,002.00 12,012.00
2 Tax 10.00 1,201 11,211.20
11,211.20
-