Professional Documents
Culture Documents
Operation
The Brake Light Switch is a normally open switch and used to deliver voltage to the brake lamps
and to provide a signal to the ECM that the driver applied the brake pedal. This signal can also be
used to disengage cruise control and torque converter lock-up.
Location
Connector
Tests
Resistance Test
Key off, disconnect stop light switch connector and place test leads Red & Blue across pins at
switch.
Pins 1 & 2 should have continuity with the brake pedal depressed.
Pins 1 & 2 should have open circuit with brake pedal released.
Key off, disconnect stop light switch connector and place test leads Red & Blue across pins at
switch.
Pins 3 & 4 should have continuity with the brake pedal released.
Pins 3 & 4 should have open circuit with brake pedal depressed.