Professional Documents
Culture Documents
TY4151 K8 Montante
TY4151 K8 Montante
www.tyco-fire.com
Contacts
IMPORTANT
Sprinkler K=8.0 gpm/psi½ (115,2 Lpm/bar½)
Temperature Ratings
Refer to Technical Data Sheet
TFP2300 for warnings pertaining to
Identification See Tables A, B and C
7/16" 3
(11,1 mm)
NOMINAL 2-3/16" 2
MAKE-IN (55,6 mm)
4
2-3/16" 1-1/2"
(55,6 mm) (38,1 mm) 5
6*
1/2" NPT** WRENCH STYLE 10 2-7/8" (73,0 mm) DIA.
FLATS RECESSED
UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION
ALL FINISHES EXCEPT POLY-STAINLESS
WRENCH 1/2" ESCUTCHEON 1 - Frame 3 - Sealing 5 - Compression * Temperature
FLATS NPT PLATE SEATING 2 - Button Assembly Screw rating indicated
SURFACE 4 - Bulb 6 - Deflector * on Deflector.
1
7/16" 3
(11,1 mm)
NOMINAL 2-3/16" 2
MAKE-IN (55,6 mm)
4
2-3/16" 1-1/2"
(55,6 mm) (38,1 mm) 5
6*
STYLE 10 2-7/8" (73,0 mm) DIA.
RECESSED
UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION
POLY-STAINLESS FINISH ONLY
FIGURE 2
SERIES TY-B UPRIGHT (TY3151) AND PENDENT (TY3251) SPRINKLERS
5.6 K-FACTOR, 1/2 IN. NPT, STANDARD RESPONSE
TFP151
Page 3 of 10
1/2" 3
(12,7 mm)
NOMINAL 2-5/16" 2
MAKE-IN (58,7 mm)
2-1/4" 1-9/16" 4
(57,2 mm) (39,7 mm)
5
6*
3/4" NPT** WRENCH STYLE 40 2-7/8" (73,0 mm) DIA.
FLATS RECESSED
UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION
ALL FINISHES EXCEPT POLY-STAINLESS
WRENCH 3/4" ESCUTCHEON 1 - Frame 3 - Sealing 5 - Compression * Temperature
FLATS NPT PLATE SEATING 2 - Button Assembly Screw rating indicated
SURFACE 4 - Bulb 6 - Deflector * on Deflector.
1
1/2" 3
(12,7 mm)
NOMINAL 2
MAKE-IN 2-5/16"
(58,7 mm)
4
2-1/4" 1-9/16"
(57,2 mm) (39,7 mm) 5
6*
STYLE 40 2-7/8" (73,0 mm) DIA.
RECESSED
UPRIGHT PENDENT ESCUTCHEON RECESSED PENDENT CROSS SECTION
POLY-STAINLESS FINISH ONLY
FIGURE 3
SERIES TY-B UPRIGHT (TY4151) AND PENDENT (TY4251) SPRINKLERS
8.0 K-FACTOR, 3/4 IN. NPT, STANDARD RESPONSE
MOUNTING MOUNTING
SURFACE SURFACE
WRENCH
RECESS
WRENCH RECESS
(END "A" USED FOR
1/2" NPT MODELS)
Poly-Stainless
Physical Characteristics Design Installation
Criteria
Frame �������������������������������������������������������Bronze
Button. . . . . . . . . . . . . . . . . L316 Stainless Steel* The TYCO Series TY-B 2.8, 5.6, and
Bulb ������������������������������������������������������������� Glass 8.0 K-factor, Upright, Pendent, and
Compression Screw ����������L316 Stainless Steel* The TYCO Series TY-B 2.8, 5.6, and Recessed Pendent Sprinklers must
Deflector ������������������������������������� Copper/Bronze 8.0 K-factor, Upright, Pendent, and be installed in accordance with this
Sealing Assembly. . Gold Plated Beryllium Nickel
w/TEFLON
Recessed Pendent Sprinklers are section.
*Type L316 stainless steel (UNS 31603) per ASTM intended for fire protection systems
General Instructions
A479/479M or BS EN 1008 WN1.4404. designed in accordance with the stan-
Do not install any bulb type sprinkler
Operation dard installation rules recognized by
the applicable Listing or Approval
if the bulb is cracked or there is a loss
of liquid from the bulb. With the sprin-
agency, such as UL Listing based on
The glass bulb contains a fluid which kler held horizontally, a small air bubble
the requirements of NFPA 13 and FM
expands when exposed to heat. When should be present. The diameter of the
Approval based on the requirements
the rated temperature is reached, the air bubble is approximately 1/16 in.
of the FM Global Loss Prevention Data
fluid expands sufficiently to shatter the (1,6 mm) for the 135°F (57°C) to
Sheets. Use only the Style 10 or 40
glass bulb, allowing the sprinkler to 3/32 in. (2,4 mm) for the 360°F (182°C)
Recessed Escutcheon, as applicable,
activate and water to flow. temperature ratings.
for recessed pendent installations.
A leak-tight 1/2 in. NPT sprinkler
joint should be obtained by apply-
ing a minimum-to-maximum torque of
7 to 14 lb-ft (9,5 to 19,0 N·m). Obtain
a leak-tight 3/4 in. NPT sprinkler joint
by applying a minimum to maximum
TFP151
Page 5 of 10
Sprinkler Finish 8
Bulb
K-Factor Sprinkler Temperature Liquid Wax-Over-
Type Rating Natural Chrome Polyesterc Poly-Stainlessc Lead Wax
Color Lead
Brass Plated Coated Coated Coated
135°F (57°C) Orange
Upright 155°F (68°C) Red
(TY1151)
2.8 175°F (79°C) Yellow 1, 2, 3
and
1/2 in. N/A N/Ad
Pendent 200°F (93°C) Green
NPT (TY1251)
Figure 1 286°F (141°C) Blue
360°F (182°C) Mauve 1, 2
NOTES
1. Listed by Underwriters Laboratories, Inc. (UL).
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C-UL).
3. Approved by FM Global (FM Approvals).
4. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 007k/03).
5. Approved by the City of New York under MEA 354-01-E.
6. VdS Approved. (For details, contact Johnson Controls, Enschede, Netherlands, Tel. 31-53-428-4444 / Fax 31-53-428-3377)
7. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 094a/05)
8. Where Polyester Coated, Lead Coated, Wax Coated, and Wax-over-Lead Coated Sprinklers are noted to be UL and C-UL Listed, the sprinklers are UL and C-UL Listed as
Corrosion-Resistant Sprinklers. Where Lead Coated, Wax Coated, and Wax-over-Lead Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as
Corrosion-Resistant Sprinklers.
a. Installed with Style 10 (1/2 in. NPT) or Style 40 (3/4 in. NPT) 3/4 in. Total Adjustment Recessed Escutcheon, as applicable
b. 150°F (66°C) maximum ceiling temperature
c. Frame and deflector only
d. Not Applicable (N/A)
TABLE A
SERIES TY-B 2.8 K-FACTOR UPRIGHT AND PENDENT SPRINKLERS
LABORATORY LISTINGS AND APPROVALS
TFP151
Page 6 of 10
Sprinkler Finish 8
Bulb
K-Factor Sprinkler Temperature Liquid Wax-Over-
Type Rating Natural Chrome Polyesterc Poly-Stainlessc Lead Wax
Color Lead
Brass Plated Coated Coated Coated
135°F (57°C) Orange
155°F (68°C) Red
Upright 1, 2, 3, 5 1, 2, 3, 5
(TY3151) 175°F (79°C) Yellow
1, 2, 3, 5, 6 1, 2 1, 2, 3, 5
Figure 2 200°F (93°C) Green
286°F (141°C) Blue 1b, 2b,3b, 5b 1b, 2b, 3b, 5b
360°F (182°C) Mauve N/A
135°F (57°C) Orange
155°F (68°C) Red
5.6 Pendent 1, 2, 3, 5 1, 2, 3, 5
175°F (79°C) Yellow
1/2 in. (TY3251) 1, 2, 3, 4, 5, 6, 7 1, 2 1, 2, 3, 5
NPT 200°F (93°C) Green
Figure 2
286°F (141°C) Blue 1b, 2b, 3b, 5b 1b, 2b, 3b, 5b
360°F (182°C) Mauve N/A
135°F (57°C) Orange
Recessed 155°F (68°C) Red
Pendent 1, 2, 3, 4, 5
(TY3251)a 175°F (79°C) Yellow 1, 2 N/A
Figure 5 200°F (93°C) Green
286°F (141°C) Blue 1, 2
NOTES
1. Listed by Underwriters Laboratories, Inc. (UL).
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C-UL).
3. Approved by FM Global (FM Approvals).
4. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 007k/03).
5. Approved by the City of New York under MEA 354-01-E.
6. VdS Approved. (For details, contact Johnson Controls, Enschede, Netherlands, Tel. 31-53-428-4444 / Fax 31-53-428-3377)
7. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 094a/05)
8. Where Polyester Coated, Lead Coated, Wax Coated, and Wax-over-Lead Coated Sprinklers are noted to be UL and C-UL Listed, the sprinklers are UL and C-UL Listed as
Corrosion-Resistant Sprinklers. Where Lead Coated, Wax Coated, and Wax-over-Lead Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as
Corrosion-Resistant Sprinklers.
a. Installed with Style 10 (1/2 in. NPT) or Style 40 (3/4 in. NPT) 3/4 in. Total Adjustment Recessed Escutcheon, as applicable
b. 150°F (66°C) maximum ceiling temperature
c. Frame and deflector only
d. Not Applicable (N/A)
TABLE B
SERIES TY-B 5.6 K-FACTOR UPRIGHT AND PENDENT SPRINKLERS
LABORATORY LISTINGS AND APPROVALS
TFP151
Page 7 of 10
Sprinkler Finish 8
Bulb
K-Factor Sprinkler Temperature Liquid Wax-Over-
Type Rating Natural Chrome Polyesterc Poly-Stainlessc Lead Wax
Color Lead
Brass Plated Coated Coated Coated
135°F (57°C) Orange
Upright 155°F (68°C) Red
(TY4151) 1, 2, 3, 5 1, 2, 5
and 175°F (79°C) Yellow
1, 2, 3, 4, 5, 6, 7 1, 2 1, 2, 5
Pendent 200°F (93°C) Green
(TY4251)
Figure 3 286°F (141°C) Blue 1b, 2b, 3b, 5b 1b, 2b, 5b
8.0
3/4 in. 360°F (182°C) Mauve N/A
NPT
135°F (57°C) Orange
Recessed 155°F (68°C) Red
Pendent 1, 2, 3, 4, 5
(TY4251)a 175°F (79°C) Yellow 1, 2 N/A
Figure 6 200°F (93°C) Green
286°F (141°C) Blue 1, 2
135°F (57°C) Orange
Upright 155°F (68°C) Red
(TY4851)
8.0 and 175°F (79°C) Yellow
1/2 in. 1, 2, 3, 4, 5, 6 N/A N/A
Pendent 200°F (93°C) Green
NPT (TY4951)
Figure 4 286°F (141°C) Blue
360°F (182°C) Mauve
NOTES
1. Listed by Underwriters Laboratories, Inc. (UL).
2. Listed by Underwriters Laboratories, Inc. for use in Canada (C-UL).
3. Approved by FM Global (FM Approvals).
4. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 007k/03).
5. Approved by the City of New York under MEA 354-01-E.
6. VdS Approved. (For details, contact Johnson Controls, Enschede, Netherlands, Tel. 31-53-428-4444 / Fax 31-53-428-3377)
7. Approved by the Loss Prevention Certification Board (LPCB Ref. No. 094a/05)
8. Where Polyester Coated, Lead Coated, Wax Coated, and Wax-over-Lead Coated Sprinklers are noted to be UL and C-UL Listed, the sprinklers are UL and C-UL Listed as
Corrosion-Resistant Sprinklers. Where Lead Coated, Wax Coated, and Wax-over-Lead Coated Sprinklers are noted to be FM Approved, the sprinklers are FM Approved as
Corrosion-Resistant Sprinklers.
a. Installed with Style 10 (1/2 in. NPT) or Style 40 (3/4 in. NPT) 3/4 in. Total Adjustment Recessed Escutcheon, as applicable
b. 150°F (66°C) maximum ceiling temperature
c. Frame and deflector only
d. Not Applicable (N/A)
TABLE C
SERIES TY-B 8.0 K-FACTOR UPRIGHT AND PENDENT SPRINKLERS
LABORATORY LISTINGS AND APPROVALS
TFP151
Page 8 of 10
Sprinkler Finish
K-Factor Type
Natural Chrome Lead Wax Wax-Over-Lead
Polyester1
Brass Plated Coated Coated Coated
Upright (TY3151)
and
5.6 Pendent (TY3251) 250 psi (17,2 bar)2
1/2 in. or
NPT 175 psi (12,1 bar)
Recessed Pendent
(TY3251)
Upright (TY4151)
and 175 psi (12,1 bar)
8.0 Pendent (TY4251)
3/4 in.
NPT
Recessed Pendent 175 psi (12,1 bar) N/A
(TY4251)
NOTES
1. Frame and deflector only
2. The maximum working pressure of 250 psi (17,2 bar) only applies to the Listing by Underwriters Laboratories, Inc. (UL), the Listing by Underwriters Laboratories, Inc. for use in
Canada (C-UL), and the Approval by the City of New York.
3. Not Applicable (N/A)
TABLE D
SERIES TY-B UPRIGHT AND PENDENT SPRINKLERS
MAXIMUM WORKING PRESSURE
torque of 10 to 20 lb-ft (13,4 to Step 3. Tighten the sprinkler into the After Installation
26,8 N·m). Higher levels of torque may sprinkler fitting using only the W-Type After installation, complete the
distort the sprinkler inlet and cause 6 Sprinkler Wrench, see Figure 7. following:
leakage or impairment of the sprinkler. For wax-coated sprinklers, use an • Inspect the sprinkler wrench flats
8 or 10 in. adjustable wrench. With and frame arms and retouch (repair)
Do not attempt to compensate for
reference to Figure 1 to 4, apply the the wax coating whenever the coat-
insufficient adjustment in the escutch-
W-Type 6 Recessed Sprinkler Wrench ing has been damaged and bare
eon plate by under- or over-tightening
or an adjustable wrench, as applicable, metal is exposed.
the sprinkler. Readjust the position of
to the sprinkler wrench flats.
the sprinkler fitting to suit. • Retouch the wax coating on the
Wax Coated Sprinklers wrench flats by gently applying a
Series TY-B Upright and Pendent
When installing wax-coated sprinklers heated 1/8 in. diameter steel rod
Sprinklers Installation with an adjustable wrench, take care to to the damaged areas of wax, to
The Series TY-B Upright and Pendent prevent damage to the wax coating on smooth it back over areas where
Sprinklers must be installed in accor- the sprinkler wrench flats or frame arms bare metal is exposed.
dance with the following instructions: and, consequently, exposure of bare
Step 1. Install pendent sprinklers in the metal to the corrosive environment: NOTICE
pendent position. Install upright sprin- Only retouching of the wax coating
• Open the jaws of the wrench suffi-
klers in the upright position. applied to the wrench flats and frame
ciently wide to pass over the wrench
Step 2. With pipe thread sealant flats without damaging the wax arms is permitted, and the retouching
applied to the pipe threads, hand- coating. is to be performed only at the time of
tighten the sprinkler into the sprinkler • Before wrench tightening the sprin- the initial sprinkler installation.
fitting. kler, adjust the jaws of the wrench The steel rod should be heated only to
to contact only the sprinkler wrench the point it can begin to melt the wax,
flats. and appropriate precautions need to be
• After wrench tightening the sprin- taken when handling the heated rod in
kler, loosen the wrench jaws before order to prevent the installer from being
removing the wrench. burned.
TFP151
Page 9 of 10
SPRINKLER TEMPERATURE
SIN RATING
FINISH
530 2.8K UPRIGHT (1/2 in. NPT) TY1151 1 NATURAL BRASS 135 135°F (57°C)
531 2.8K PENDENT (1/2 in. NPT) TY1251 POLY-STAINLESS GREY 155 155°F (68°C)
2 ALUMINUM (RAL9007)1
POLYESTER
570 5.6K UPRIGHT (1/2 in. NPT) TY3151 175 175°F (79°C)
PURE WHITE (RAL9010)2
3
POLYESTER
571 5.6K PENDENT (1/2 in. NPT) TY3251 200 200°F (93°C)
SIGNAL WHITE (RAL9003)
4
POLYESTER 286 286°F (141°C)
590 8.0K UPRIGHT (3/4 in. NPT) TY4151
JET BLACK (RAL9005)3
5
POLYESTER 360 360°F (182°C)
591 8.0K PENDENT (3/4 in. NPT) TY4251
WAX COATED
6
286°F (141°C) MAX 000 OPEN4
560 8.0K UPRIGHT (1/2 in. NPT) TY4851
7 LEAD COATED
561 8.0K PENDENT (1/2 in. NPT) TY4951
WAX-OVER-LEAD
8
286°F (141°C) MAX
9 CHROME PLATED
NOTES
1. Only available on TY3151, TY3251, TY4151, and TY4251.
2. Eastern Hemisphere sales only.
3. Available in only 8.0K, 155°F (68°C) or 200°F (93°C); requires lead time to manufacture.
4. Available only for 8.0 K-factor TY4151 and TY4251 for use in deluge systems (“OPEN” indicates sprinkler assembly without glass bulb, button, and sealing assembly).
TABLE E
SERIES TY-B UPRIGHT AND PENDENT SPRINKLERS
PART NUMBER SELECTION
Ordering
damaged wax coating)
Specify: (specify color, below) Color-
Procedure
coded Wax Sticks for retouching
(specify temperature rating) tempera-
ture-rated Series TY-B Sprinklers, P/N
Contact your local distributor for avail- (specify)
ability. When placing an order, indicate
the full product name and Part Number Black for 135°F (57°C) . . . . . . P/N 56-065-1-135
Red for 155°F (68°C) . . . . . . . . P/N 56-065-1-155
(P/N). Yellow for 175°F (79°C) . . . . . . P/N 56-065-1-175
Sprinkler Assemblies with Blue for 200°F (93°C)
and 286°F (141°C) . . . . . . . . . . P/N 56-065-1-
NPT Thread Connections 286
Specify: Series TY-B (specify SIN),
(specify K-factor), (specify Upright Note: Each wax stick is suitable for
or Pendent) Sprinkler with (specify) retouching up to 25 sprinklers.
temperature rating, (specify) finish or The wax used for 286°F (141°C) sprinklers
coating, P/N (See Table E) is the same as for 200°F (93°C) sprinklers.
Recessed Escutcheon Therefore, the 286°F (141°C) sprinkler
Specify: Style (10 or 40) Recessed is limited to the same maximum ceiling
Escutcheon with (specify*) finish, P/N temperature as the 200°F (93°C) sprinkler
(specify*) which is 150°F (66°C).
* Refer to Technical Data Sheet TFP770
NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association;
TEFLON is a registered trademark of DuPont