Professional Documents
Culture Documents
ELECTRICAL NOTE :
1.Drawing is to be read inconjuction of all other architectural
drawings.
2. P.V.C. conduit should be of HMS quality and minimum
20mm dia.
3. No conduit is to run in colunms & beams,only horizontal
crossing & vertical drops in beams is allowed.
4. Minimum 20mm. gaps between two conduit is to be
maintained to allow concrete or cement mortar between them.
5. Execution is to be carried out as per I.S specifications.
6. Fan boxes untill unless mentioned is to be located in the
25MM THK TERRACING OVER 115MM THK RCC SLAB centre of the area.
7. 15A switch for Geysers can be located in a separate switch
board according to site conditions.
450
450
8. All the dimension mentioned in the legend and height notes.
1650
It may change according to site conditions.
2400
9. office room/ other room of all switch board in side bed to be
750
placed at height of 900 mm above the floor height
10. The main switch board to be placed right side of near the
1200
entrance at the height of 900 mm above the floor height.
11. Kitchen and toilet of all switch board to be placed at height
3600
1650
of 1200 mm above the floor height.
12. A sample room to be approved before comprehensive
750
execution.
1200
3600
1650
750
1200
3600
T=300
2400
T=300
R=150 R=150
600
600
SECTION ON R-R
450
CLIENT -
1650
IMPLEMENTING AGENCY -
3600
PROJECT TITLE
750
1200
ACADEMIC BLOCK
3600
1650
SCALE -
SECTION ON S-S DESIGNED BY -
DATE -
Architects -
SPACE ARCH
ARCHITECTS:ENGINEER:PLANER
205,JAYADEV VIHAR, BHUBANESWAR AR. D.K.PARIDA
REGD NO. CA/94/17260
ELECTRICAL ENGINEER
EXECUTIVE ENGINEER
ER. SAMEER KU NAYAK DIVISION-V (PWD)