Professional Documents
Culture Documents
CH
SD
SP
tk
A Company
of ThyssenKrupp
Elevator
ThyssenKrupp Aufzüge
Evolution® compact – without Machine Room
and Shaft Pit – Higher, Faster, Less.
Facts, Data and Dimensions.
Evolution® compact, the traction The standard equipment of plastering and thus easily be
driven standard passenger our elevator installations implies made to fit the wall plastering of
elevator without machine room the efficient, proven and the building. However, you can
and shaft pit, has been convenient S8/K8 doors as two- also use wall frames in the case
designed for more powerful, part telescopic sliding doors in of altered dimensions. You will
but also economical passenger left-hand execution. However, find more details in our project
service in cases with little they are also available in right- planning document “Door
ground clearance (e.g. above hand execution or as central openings”.
underground carparks, supply opening execution. The telescopic Please find information on the
lines and groundwater). doors are 900 mm in width, overall design of elevator instal-
A number of revolutionary inno- the central opening doors are lations in our separate planning
vations concerning the elevator available in widths of 800 and information.
car and various safety devices 900 mm. And to complete the Should your requirements or
have enabled us to replace the range, you can select between demands exceed the following
shaft pit with a reduced shaft pit the installation of the landing range, please contact one of
depth of only 300 mm. doors on the landing in a recess our experienced consultants.
The Thyssen Mini gearless®, a or entirely in the shaft.
frequency-controlled, gearless The following shaft ground
high-performance drive, moves plans and vertical sections show
standardized elevator cars with the door openings with gaps
rated loads of 630 or 1000 kg between the wall soffit or lintel
resp. 675 or 1050 kg with open and door frame which can be
through at a speed of 1.0 m/s. filled by means of concreting or
Abbreviations:
A = right-hand door soffit door recess meas.
CD = car depth Q with without in acc.
CW = car width [kg]/ open door DW R SD SD SW A CD CW with DIN
DH = door height
DW = door width
[pass.] through type [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] 18024/25
FF = finished floor
O1 = hoisting ring above machine
telescopic 900 55 1800 1855 1650 100
frame 630/ no 800 1850 425 1400 1100
O2 = hoisting ring(s) above door(s) 8 central 20 1780 1795
Q = rated load 900 2000 450
R = recess
SD = shaft depth telescopic 900 55 1930 2040 1650 100
SH = shaft head
SP = shaft pit 675/ yes 800 1850 425 1400 1100
SW = shaft width 9 central 20 1890 1920
UF = unfinished floor 900 2000 450
v = speed
telescopic 900 55 2500 2555 1650 100
1000/ no 800 1850 425 2100 1100
Dimensions
13 central 20 2480 2495
The dimensions indicated are finished
900 2000 450
measures if not stated expressly.
telescopic 900 55 2630 2740 1650 100
1050/ yes 800 1850 425 2100 1100
14 central 20 2590 2620
900 2000 450
2
Evolution® compact – without Machine Room
and Shaft Pit – A Cut Above.
Shaft Ground Plans.
DW + 200 DW + 200
DW DW
R
R
SD
SD
With telescopic sliding doors: SW SW
DW + 200 DW + 200
DW DW
R
R
SD
SD
630 kg / 8 passengers 1000 kg / 13 passengers
CW = 1100
CW = 1100
CD
SD
CD
SD
R
DW
DW + 200
SW
R
DW
DW + 200
SW
R
R
DW DW
DW + 200 DW + 200
SW SW
3
Evolution® compact – without Machine Room
and Shaft Pit – A Cut Above.
Constructional Ground Plans and Shaft Head Plans.
Occurring Forces.
UF
UF
4
5
SP min. = 300 Travel height (TH) max. = 40 m (v = 1.0 m/s) Shaft head (SH) min. = 3550/3650 (v = 1.0 m/s)
SP max. = 400 Travel height (TH) min. = DH + 450 Car height (CH) = 2200/2300
DH + 100
Door height (DH) = 2000/2100
FF
FF
Recess up to SP floor!
UF
UF
Vertical Section.
R
UF
SD
and Shaft Pit – Rising to the Top.
Evolution® compact – without Machine Room
For additional information as well as planning and project data please see
Planning information:
● Passenger- and freight elevators (9700 000 1530)
● Evolution® classic – traction drive elevator without machine room (9700 000 1537)
● Evolution® flexible M – traction drive elevator without machine room with variable car dimensions,
FF
UF
Please contact:
binding when confirmed expressly in writing. Reproduction,
The details quoted in this brochure can only be viewed as