Professional Documents
Culture Documents
MULTISEAL 2000
DESCRIPTION
ADVANTAGES
Multiseal 2000 (MS2000) Liquid Applied Waterproof
System is an essential integral part of your concrete. 1) Excellent asphalt adhesion
It not only enhances the hardness and strength of • Good for bridge deck applications where
your concrete, concurrently it creates an interface asphalt topping is normally required
that is, 2) Increase concrete hardness and strength up to
• vapour proof, 35%
• waterproof, • Surface will not be worn down by heavy
• oil proof, traffic, abrasion and thermal stress
• acid resistant • Maintain good tensile
• chloride ion resistant and 3) Seals Hair-line cracks up to 1mm
• high in strength. • By injection of Calcium Acetate.
• Waterproof cracks undergoing cyclical
When concrete cures, fine capillaries are formed expansion and contraction with temperature
within. The formation of capillaries is inevitable in change
this process and it will render the concrete porous 4) Continuous waterproofing activities
and weak. Hence, the necessity of applying sealants • Reseals shrinkage cracks as they form with
to these catastrophic voids to new or old concrete time in the presence of water
substrates can never be compromised! 5) Major cost reduction
• Asphalt topping is no longer necessary
When Multiseal 2000 is applied, it seeps its way (except for bridges)
down and through the voids (capillaries) in the • Eliminates maintenance cost completely
concrete. Multiseal 2000 will then react at ambient • Relatively cheaper than other forms of
temperature with free lime present in the concrete, surface treatment
forming non water soluble complexes of calcium • Low consumption rate per area of
silicate which are chemically resistant compounds. application
These compounds fill the porous surfaces and sub 6) Eliminates surface problems like:
surfaces of the concrete, forming a breathing • Surface scaling, caused by improper
waterproof barrier up to 20 mm deep to prevent finishing and curing, free-thaw damage and
water leakage and the ingress of contaminants. application of salt for snow removal.
• Cracking caused by thermal contraction,
This highly effective penetrating waterproofing load on concrete and rapid water loss when
system shall protect the concrete from deterioration concrete still at plastic stage.
and maintain a seal in high thermal stress • Dusting caused by rain during finishing or
application, especially on large horizontal surfaces. too wet of mix.
• Efflorescence, caused by water soluble salts
from the soil or the environment travelling
USES
back into the concrete.
• Discolouration caused by metal in the
• Bridge Decks
cement, aggregates, fast sets and sealants
• Roof and car park roof
that change colour, e.g. acrylic & silanes.
• Car park flooring
• Concrete wharf areas
• Water proofing concrete floors and concrete
blocks.
• Plant floors, walkways and driveways
• Concrete wharf areas.
Product Data Sheet
Edition : August 2018/LKY
Water Flowing Downwards Multiseal 2000 Seeping into the Voids Completely Stops Water Seepage
Concrete
Multiseal
Free 2000
Lime
Excess Multiseal
Water 2000
Water
Insoluble Gel
UNTREATED APPLY MS2000 Complex TREATED
TECHNICAL DATA
Bulk specific after immersion and boiling 2.41 2.40 2.39 2.42
PRODUCT PROPERTIES
Flammability N/A
Solids 25.5%
Guarantee
The information contained in this leaflet is based on our experience and technical knowledge, obtained through laboratory testing and from bibliographic
material. GREENSEAL reserves the right to introduce changes without prior notice. Any use of this data beyond the purposes expressly specified in the
leaflet will not be the Company’s responsibility unless authorized by us. Our guarantee covers exclusively the quality of the manufactured product. We will
not accept any responsibility exceeding the value of the purchased product.
Greenseal Products (M) Sdn Bhd, Lot 5 & 7, Jln 35/10A, Taman Perindustrian IKS, Mukim Batu Caves,
68100 Kuala Lumpur, Malaysia. Tel : 603-61882298 Fax : 603-61861298
E-mail : enquiries@greenseal.com.my URL: http://www.greenseal.com.my
Greenseal is certified by
MS ISO 9001:2008 Quality Management System
ISO 14001:2004 Environment Management Systems