Professional Documents
Culture Documents
50 Edit Cross Section
50 Edit Cross Section
MT10043 – NX 9.0
Define a section
First you will edit the part’s cross section in History-Free Mode. Later you will edit
the part’s cross section in History Mode.
1. Open syn2_edit_cross_section.
7. Middle-click to accept the sketch plane and enter the Sketch task environment.
o Horizontal =
o Vertical =
o Collinear =
o Coincident =
Because the solid body has been modified in History-Free Mode, the sketch used to
cross section the part is deleted. If you want NX to maintain the sketch and the
constraints, use the Edit Cross Section command in History Mode.
7. In the Edit Cross Section dialog box, in the Preview group, clear
the Preview check box.
8. In the Section Curve group, click Section to enter the Sketch task
environment.
o Horizontal =
o Vertical =
o Collinear =
o Coincident =
click Collinear .
7. Select the vertical line as shown, and then click the middle mouse button.
10. You can continue to constrain the sketch or go to the next step.
12. In the Edit Cross Section dialog box, click OK to complete the edits.
13. In the Part Navigator, right-click Body (1) and choose Show.
2. In the Edit Cross Section dialog box, in the Preview group, select
the Preview check box.
click Section .
5. When you finish editing the sketch, right-click in the background of the graphics
6. To complete the edits, in the Edit Cross Section dialog box, click OK.
You can use the Edit Cross Section command in History Mode to add design
intent to models with or without feature history.
7. Close the part now or close all parts when you exit the session.