Professional Documents
Culture Documents
04 Replace Defining Strings and Surfaces
04 Replace Defining Strings and Surfaces
MT10043 – NX 9.0
Since the designer expected significant changes to the part, sketches, extruded
bodies, and trim features are used so that the part surfaces can be replaced.
3. In the Part Navigator, right-click Sketch (9) PAD_PROFILE and choose Show.
8. Click OK.
The shape of the pad updates and preserves the shape of the blends and taper.
You want to replace the trim datum plane with the lower sheet body.
3. In the Trim Body dialog box, with the Tool Select Face or Plane (1) active, use
Shift + select to deselect the datum plane and then select the bottom sheet
body.
The base now has a curve shape based on the sheet used for trimming.
Both the base and the top surfaces now have curvature.