You are on page 1of 4

Republic of the Philippines

Department of Education
Region IV – A CALABARZON
Division of Rizal
SAN MATEO NATIONAL HIGH SCHOOL
San Mateo, Rizal
Third Periodical Test in ICT – Computer Hardware Servicing
A. Multiple Choice:
Directions: Read the statement carefully & choose the letter of the correct answer. Write the letter only.
1. ______ It is a type of copper cabling that is used for telephone communications and Ethernet networks.
a. Coaxial cable b. Unshielded pair c. Untwisted pair d. Twisted pair
2. ______ It is the cable that has two or four pairs of wires. It cancel the effect produced by the twisted-
wire pairs that limits signal degradation caused by EMI and RFI.
a. Unshielded twisted pair b. untwisted pair c. Twisted pair d. Coaxial cable
3. ______ It is a pair of wire is wrapped in metallic foil to better shield the wires from noise.
a. Unshielded pair b. Shielded twisted pair c. Untwisted pair d. Twisted pair
4. ______ It is a copper-cored cable surrounded by a heavy shielding. Coaxial cable is used to connect the
computers to the rest of the network
a. Unshielded pair b. Coaxial cable c. Twisted pair d. micro computer
5. ______ (10BASE5) is a coaxial cable used in networks with a maximum length of 500 meters.
a. Thinnet b. 10BASE1 c. Thicknet d. 10BASE2
6. ______ (10BASE2) is a coaxial cable used in networks with a maximum length of 185 meters.
a. Thinnet b. 10BASE2 c. Thicknet d. 10BASE1
7. ______ It is a glass or plastic conductor that transmits information using light.
a. Multimode b. Single-mode c. Coaxial cable d. Optical fiber
8. ______ It is the fastest way of connecting PC to a peer or to your router or a central switch.
a. Ethernet cabling b. Straight-through c. Cross-over d. peer to peer
9. ______ It is the Ethernet cable used in local area network to connect a PC to a network hub and router.
a. Cross-over b. straight-through c. peer to peer d. Ethernet cabling
10. _____ It is used to connect two network devices directly, without the need for a router in the middle.
a. motherboard b. CPU c. cross-over cable d. ROM
11. _____ These are sets of rules governing communication within and between computers on a network.
a. Network protocol b. CPU c. File transfer protocol d. Internet protocols
12. _____ It governs how files such as text, graphics, sound, and video are exchanged on the (WWW).
a. HTTPS b. HTTP c. HTML d. SMT
13. _____ It secure communication over a computer network that is widely used on the Internet.
a. HTTPS b. HTML c. SMT d. HTTP
14. _____ It provides services for file transfer and manipulation.
a. HTML b. HTTPS c. FTP d. SMT
15. _____ It is a number that is used to identify a device on the network
a. Protocol b. IP address c. FTP d. ROM
16. _____The subnet mask indicates the network portion of an IP address.
a. Ehernet b. subnet mask c. IP Address d. MAC
17. _____ It is used for large networks, implemented by large companies and some countries
a. Class A b. Class B c. Class C d. Class D
18. _____ It is used for experimental testing
a. Class D b. Class B c. Class C d. Class E
19. _____ It is used for small networks, implemented by ISPs for customer subscriptions
a. Class D b. Class B c. Class E d. Class C
20. _____ It is used for medium-sized networks, implemented by universities
a. Class A b. Class B c. Class C d. Class D
II. Identification: Direction: Identify the HOST of each Class according to octet.

21.

22.

23.

Write the octet of the following with complete subnet mask.


24. Class A ______________________
25. Class B ______________________
26. Class C ______________________

Give the acronym of the following:


25. DIR ______________________
27. MD ______________________
28. CD ______________________
29. RD ______________________
30. C/S ______________________

Identify the STRAIGHT THROUGH colors: Identify the CROSS-OVER colors:


31. ______________ 39. ______________
32. ______________ 40. ______________
33. ______________ 41. ______________
34. ______________ 42. ______________
35. ______________ 43. ______________
36. ______________ 44. ______________
37. ______________ 45. ______________
38. ______________ 46. ______________
III. Re-arrange the steps in Assigning IP Address by writing number 1- 9.
47. ____ Press enter
48. ____ Type the IP address 192.158.162.0
49. ____ Click multipoint server.
50. ____ Click properties.
51. ____ Right click the networking and sharing icon.
52. ____ Use the following IP address
53. ____ Click Internet Protocol 4 (TCP/IPv4)
54. ____ Identify the subnet mask class.
55. ____ Click Properties.

IV. Compute the following: Binary to Decimal with computation.


56. 0 0 1 1 1 1 0

57. 1 0 1 1 0 1 1

58. 1 0 1 0 1 0 1

59. 1 1 1 0 1 1 1

60. 1 1 1 0 0 1 1

Prepared by: Checked by:

MARICRIS A. CARREON CHARLIE MAGHANOY


Subject Teacher TLE – MT-I

Noted by: Approved by:

ROWENA V. BUNAG MR. ABSALON C. FERNANDEZ


TLE-HTI Principal IV

You might also like