Professional Documents
Culture Documents
Assignment details
Course Name: Engineering Drawing
Target group: TED and LPED 2nd year
Assessment type: Individual Assignment No.2
Submission dead line: The next day up on your return to EiTEX
2. General information
Read the instructions given in part I to part IV of this exercise and assignment.
Use standard A4 size paper, suitable scale, lettering, title block, and other drawing
standards.
Assume any missing dimensions.
Part I: Exercise
Part I
Instruction: Use free hand drawing to produce orthographic projection for the given pictorial
drawings.
Part II: Assignment
Instruction: Select five pictorial drawings and produce their complete multi view drawings. Paper
scale is a reference dimension and you can use suitable scale, sectioning method and dimensioning
rules to produce a complete multi view / orthographic drawing.
Part III: Assignment
Instruction: Select three pictorial drawings and produce their complete multi view drawings. Paper
scale is a reference dimension and you can use suitable scale, sectioning method and dimensioning
rules to produce a complete multi view / orthographic drawing.
3.1
3.2
3.3 3.4
3.5
3.6
Part IV: Assignment
Instruction: Select five pictorial drawings and produce their complete multi view drawings. Paper
scale is a reference dimension and you can use suitable scale and dimensioning rules to produce a
complete multi view / orthographic drawing.
4.1 4.2
4.4
4.3
4.6
4.5
4.7
4.8
4.9 4.10
4.11 4.12
Part V
Instruction: Select seven and make a complete orthographic drawing (with necessary number of projections) of
each model and dimension it. Use first angle projection for odd number problems and third angle projection
for even number problems.