Professional Documents
Culture Documents
TST1501
THEORY OF STRUCTURES
Total mark 50
Instructions:
Honor Pledge: I have neither given nor received aid on the assignment.
Plagiarism is the act of taking words, ideas and thoughts of others and presenting it
as your own. It is a form of theft which involves a number of dishonest academic
activities.
Open Rubric
QUESTION 1 [5]
A bar of mild steel has an overall length of 2.1 m. The diameter up to 700 mm length
is 56 mm, the diameter of the remaining 1.4 m is 35 mm. Calculate the extension of
the bar due to a tensile load of 55 kN.
QUESTION 2 [20]
A tensile test was conducted on a mild steel bar. The following information was
obtained from the test:
-Diameter of steel bar =3 cm
-Gauge length of bar=20 cm
-Load at elastic limit =250 kN
-Extension at load of 150 KN = 0.21mm
-Maximum load =380 kN
-Total extension = 60 mm
-Diameter of the rod at the failure =2.25 cm
QUESTION 3 [25]
A built section is shown in Figure 1 , calculate the following with XX and YY as
reference points:
3.1 The position of the centroid of the section (5)
3.2 The second moment of area about the XX and YY (5)
3.3 The radius of gyration, (5)
3.4 The elastic section modulus (5)
3.5The plastic section modulus (5)
Figure 1
TOTAL=50 MARKS
@
UNISA 2021