Professional Documents
Culture Documents
Construction:
The casing consists of stainless steel (V2A) which is sanded 240 grain. The
Zinc coating (inside out) anti–corrosion
complete Boom barrier consists of a boom, drive mechanism which incorporates Noted as Remarks as Our Specs
treatment,
a gear box and service free joints.
The casing is removable and consists of 2 sides panels and a Red lid (RAL 3002).
Heavy duty. straight aluminum
The frame of the boom barrier is a steel standalone construction, and simplifies
Noted as Remarks as Our Specs alloy – Boom octagonal profile, Anti-corrosive Yellow and black
installation and maintenance. The construction is very weather proof due to
color coating,
galvanisation of steel parts.
The controller is a micro processor control box and is installed in an IP 65 casing.
Compliant to IP 65 standards, Boom octagonal profile –
Integration of external contacts is forseen. The boom of the GES 2-4 is a 80 mm Noted as Remarks as Our Specs
100mmX55mmX1.6mm
aluminium profile which is installed on a singlesided adaptor.
The colour of the barrier is White (RAL 9016) and has Red reflective stripes. On
boom lengths over 3000 mm a support post is necessary. (as a fixed or
Comply
pendulum type) In case of power failure the boom barrier has a manual override
which is accessible by removing the frontal case panel.
1 Control Panel :
Shall be constructed for out door use and has a built in microprocessor. The
Operated by single phase motor 240v AC
casing shall be made of stainless steel “1.4301, grinding 340“ with a top cover in
Comply 50/60 Hz, with air cooled system for
RAL3002“. Motor: 400 V 3 phases, 60 Hz, With modified gear. Shall include
continuous operation
manual lowering & raising feature in case of power failure.
2 Operating Time:
Raising: 3 Sec. Comply 4-6 sec.
Lowering: 3.5 Sec. Comply 4-6 sec.
3 Installation:
The unit is to be installed on a flat foundation as recommended by the producer
Comply
and poured on site. The electrical conduits to be supplied on site.
4 Foundations:
Type GES-2 up to Type GES-6:
Prepare a Pit of dimension
Length: 600 mm, Width: 600 mm, Depth: 800 mm Noted as Remarks as Our Specs
450*350*400mm (L*B*D)(
5 Country of Origin:
The Arm Barrier shall be manufactured in Europe or USA. Comply
Full Panel Speed Gate for Internal Installation (Motorized full glass sliding leaves
Comply This is not part of Arm barrier, this is speed gate.
1.2m height).
6 Drive
Motorised. Safety force sensing and photocells. Logic Voltage 24Vac Comply
7 Materials
Zinc coating (inside out) anti–corrosion
Top (MF / SS): Painted polyurethane / stainless steel Noted as Remarks as Our Specs
treatment,
Zinc coating (inside out) anti–corrosion
Front (MF / SS): Painted polyurethane / stainless steel Noted as Remarks as Our Specs
treatment,
Zinc coating (inside out) anti–corrosion
Standard finish (MF / SS): Metallic grey / full stainless steel 304 grade Noted as Remarks as Our Specs
treatment,
Zinc coating (inside out) anti–corrosion
Wing housing: Painted steel / stainless steel finished to match top and front Noted as Remarks as Our Specs
treatment,
Zinc coating (inside out) anti–corrosion
Inlay: 304 grade grained stainless steel Noted as Remarks as Our Specs
treatment,
Panels: 12mm toughened glass with rubber safety edge Comply This is not part of Arm barrier, this is speed gate.
Side Doors (MF / SS): Acrylic and stainless steel / 8.5mm 3 ply laminate safety Zinc coating (inside out) anti–corrosion
Noted as Remarks as Our Specs
glass treatment,
Zinc coating (inside out) anti–corrosion
Plinth: 304 grade grained Stainless steel Noted as Remarks as Our Specs
treatment,
9 Status Lights
50mm diameter LED display status lights flush mounted within the lid top
Comply
surface with “Green Arrow”, “Red Cross” and “Green Card” illuminated symbols.
10 Additional Interface
Arm Barrier - COMPLAINCE SHEET
GACA Project - SECTION 28 13 00
Section Comply / Not Comply
Description Remarks
L1 L2 L3 L4 Partially Comply / Noted
Potential free contact provided by either card reader or pushbutton input. Card
reader inhibit and reset outputs signals are available as standard. Adjustable
time out facility if required, i.e. Go signal will be cancelled if the passage is not
Comply
completed within a preset time. The Standard default is 8 seconds adjustable via
parameter change. New electronics with built-in RS485 and COMR1 switching
interface functionality
12 Security Features:
Intrusion, Tailgating, Piggybacking, Wrong way direction, Leave aisle timeout,
Comply This is not part of Arm barrier, this is speed gate.
Anti-crawling flap leaf barrier.
13 Safety Features:
Safety force sensing, Safety rubber edges, Accurate presence sensing,
Emitter/receiver infrared sensors technology, Logic voltage 24 Vac,Voltage free
contact input for Fire Alarm fail state, Fail-Safe manual push opening, Fail-Safe Comply This is not part of Arm barrier, this is speed gate.
via battery back-up opening, Wide walkway for wheel chair or easier access,
Accompanied wheelchair or Child passage management.
14 Country of Origin:
The product shall be manufactured in Europe or USA. Comply, USA
3. Materials List
ALBAWANI CO.LTD
P.O.Box: 65697- Riyadh 11566 – Tel.: 2931193-2931137 – Fax: 2931170 – C.C. No. 27644
E-mail: info@albawani.com
PSS Systems Material List
SPECIFICATIONS QUANTITY
No.
Model Description Picture Type of packing PCS.
Tyre Killer
TiSO RB379-0X(spikes - 80 spikes height - 80 mm- for surface-mounted wooden
A mm, blocking width - installation;- corrosion-protected, warning painting crates/wooden 206
1000 mm) - black and yellow;- gravital principle of spike pallets
Fixed Bollards
Blocking diameter - 355 mm;
Blocking height - 1200 mm;
Installation depth - 400 mm;
TiSO 345-09-S-035 fixed
Anti-ram class: M50 (K12);
bollard(certified in wooden
Material - constructional steel;
B accordance to M50 F2656 crates/wooden 30
galvanized and painted;
standard, equivalent to pallets
U-shapped 32 mm diameter rod included;
K12)
standard reinforcing rebar NOT included;
painting of stripe is included;
certified as triple system
Turnsle
wooden
Holder for biometric Metal holder for Sigma Lite on the tempered glass
C2 crates/wooden 16
reader top-lid. Image for reference only
pallets
Road Blocker
4. Product Datasheets
ALBAWANI CO.LTD
P.O.Box: 65697- Riyadh 11566 – Tel.: 2931193-2931137 – Fax: 2931170 – C.C. No. 27644
E-mail: info@albawani.com
HIGH SECURITY FIXED BOLLARD
Crash-tested
according to
High security fixed bollards were designed to protect the perimeter of INSTALLATION AREAS
the protected area. Following model can stop a truck 7 200 kg (7,2 t) • Governmental Institutions
mass driving at 80 kph (50 mph) speed. This confirmed by • Military Bases
successfully passed tests ASTM F2656/2656M-20 and IWA 14-1:2013. • Nuclear Power Plants
• Production sites (Industrial Plants)
One of the greates advantage of following model is absence of H- • Commercial areas
beams or pre-welded structures, in order to minimize shipping • Financial institutions
volume and weight. • Airport Premises
• Business (Office) Center
Bollards are installed at a depth of 400 mm only. Minimal installation • Hotels
depth and maximum anti-ram protection - this is the ideal combination • Sport Complexes
• Recreation areas
that our customers are looking for. This model can be installed at
• Urban areas
urban areas, because the installation depth of 400 mm ensures that
• Education Institutions
the underground urban communications won’t be affected. etc.
YS
TEM
CERTIFICAT
IO
www.tiso.global
N
S
e-mail: sales@tiso.global
00