Professional Documents
Culture Documents
GST NO : 24AAICC4574G1ZN
PAN NO : AAICC4574G
PURCHASE ORDER
Dear Sir
With reference to our discussions and your subsequent quotation ref. no. KMF/CP/1-20 dated
06/10/2020, we are pleased to place an order on you for fabrication and supply of GMP model equipment
as per price schedule in table below and technical specifications in ANNEXURE attached :-
2 ton capacity Flame proof goods lift with all below 1 no. 5,15,300.00 5,15,300.00
1
specifications
2 Installation & Commissioning charges 1 no. 25000.00 25,000.00
1. Delivery within 2 weeks after P.O. & Advance payment Ex Wada works and Panel to be dispatched
as per our schedule given.
2. Short/Excess quantity shall be accepted by us on prior consent taken.
3. We reserve the rights to reject the material for not confirming to our specification
4. Goods rejected should be removed from premises within 7 days at the supplier cost or risk.
5. Kindly mention our purchase order number on all the documents. Without purchase order number,
the bill will not be accepted.
6. We reserve the rights to cancel purchase order if not executed within specified time or reason.
7. GST extra as applicable. Currently it is @ 18 %.
8. Freight & Insurance are included.
9. Payment terms: Advance 30 % with PO and 40 % against Proforma Invoice prior to delivery and
balance 30% after 15 days from successfully Installation/running.
10. Equipment drawing in AutoCAD & PDF to be submitted for approval.
11. Consignment must accompany copy of invoice, certificate of analysis, E Way Bill etc.
12. Material should carry label with batch number, manufacturing date & retest date.
13. Guarantee - 18 Month free repair & service for manufacturing defect and free replacement of
parts of Kohinoor Metal Fabricators manufacturing defect.
14. Trial & Inspection with dry run at Kohinoor Metal Fabricators with FAT.
15. Packing - Machine shall be wrapped with stretch film all over with required cushioning for sensitive
parts. Wooden packing charges included.
16. Commissioning - Commissioning charge included.
17. Installation Kohinoor Metal Fabricators shall give the installation & commissioning manual, circuit
diagram, Operation and Maintenance manuals before the dispatch (2 sets).
18. Documentation - ALL GMP DOCUMENTATION LIKE DQ, FAT , IQ ,OQ& PQ, OPERATION &
MAINTENANCE Manual , GA DRAWING etc. as per your requirement shall be provided along with
the delivery of machine in 2 sets + 1 soft copy.
19. Vehicle carrying material should comply with RTO & motor vehicle act.
20. Subject to Surat Jurisdiction
E. & O.E
(AUTHORISED SIGNATORY)
ANNEXURE – I
(A)FEATURES OF HOSIT
Hoisting Unit
• Sturdy and rugged construction, totally enclosed, Splash lubricated oil bath, helical gear box
type base mounted , four fall wirerope hoist is a standard feature of “KOHINOOR” cage
hoist .
• Solid pinions running on ball bearings ensures Efficient and smooth operation.
• Four fall wirerope design keeps the cage movement constantly in centerthrough out the
track and avoids jerks on sings in movement.
• Gears and pinion shall have 250 to 300 BHN hardness.
Lift crane
Control Circuit
• Totally Interlocked electrical circuit with up and down motion as well as limit switches for floor
and door lock ensure saetyaginst two simultaneous operationat the time.
• “T” track and guide shoe CI Body , Guide sheo assembly slide over “T” track give smoothe and
jerk free operation in load and unload condition.
• The special swivelling feature of guide she take care of slight misalignment of track.
• Limit Switches for all floor level control, for up and down motion and highest and lowest
cage position shall be provided.
• Beside this one additional Gravity type Limit switch will also be provided at top hook
position to avoid accident.
• The Door lock is provided with limit switch which prevents lift operation in case any main
entrance door remain open.
ANNEXURE – II
Cage Specification :
• Cage size : 1.6m x 1.6 m x 2.1 m
• Fabricated with M.S. Structrual steel
• Two side and top cover with powder coated sheet
• Two side collapsible door
• Bottom made from SS304 chq. Plate
Structure Specification
• Guide Track 4 nos
• Track installed thru anchor bolt and MS structural steel.
• Floor Door Collapsible door at each opening
• Ground floor 01 no. Door is imperforated door
A) GENERAL DESCRIPTIONS
SWL Capacity 3000 kgs
Type of Crane Wirerope hoist
Quantity One
Height of Lift 18.0 mtr
Area Classification Safe
Duty Classification Class – II, Medium Duty, IS:3177, IS:807
Location Indoor ( Ambient Temp. 45 C)
Crane Operation Floor Operated through push button
Power Supply 415V + 10% , 50 HZ + 5%, 3 Phase, AC supply
Control Voltage 110 AC
B) HOISTING SPECIFICATION
Speed 4Mtr/Min
Motor FLP Squirrel Cage, S4 – 40% CDF , 150 start stop/hr,
Insulation class F, IP-55, Confirm to IS-325
HP x RPM 5 HP x 1400 RPM x 1 nos
Make Bharat Bijalli
Wire Rope Usha Martin Make
Dia 10 mm
Construction 6 x 36 const. Fiber Core, Confirms to IS:2266
No. of Falls 4
Brake Electromagnetic Disc Break “ Fail to Safe ”
Type Disc Type
Make GMAC with FLP Junction box
Hook Single Shank, Trapezoidal Section, Confirms to IS:3815
Gearbox 3 stage Helical type
C) ELECTRICALS
MCB/ Contactor/ Overload Relay Schneider/ Std. Make
Push Button Station PVC type, Suspended on Plastic lamination wirerope
Cables PVC insulated copper flexible, ISI Brand
Control Panel Box Powder coated, Fabricated from sheet metal
VFD Drive Optional
Load Cell with Display Optional
Limit Switch For Max Up & Max Dn 02 nos limit switch roller type