Professional Documents
Culture Documents
LE ER
LEARNING RESOURCES MANAGEMENT AND DEVELOPMENT SECTION
SA P
R RO
FO P
T E NT
NO NM
SELF-LEARNING KIT
R
VE
GO
INDUSTRIAL ARTS
ENGLISH AT METRIC
BASIC SET-UP OF A
SHIELDED METAL ARC WELDING (SMAW) MACHINE
DALAWANG SISTEMA NG PANUKAT
GRADE
GRADE 4
9-12
WRITER/LAYOUT ARTIST: GIOVANNI POCH N. PEÑAFLOR
EVALUATOR: EMELITA G. PAGUIO
EVALUATOR: MARY ANN S. VALDEZ
Book Record
School: _____________________________________________________________
District: _____________________________________________________________
Division: ____________________________________________________________
Region: _____________________________________________________________
Date received by school: _______________________________________________
To the Teacher
Write your name clearly under the column “Issued to.” Use the following letters
in recording the condition of the book:
A New Book
B Used Book in Good Condition
C Used Book in Fair Condition
D Used Book in Poor Condition
Basic Set-up of a Shielded Metal Arc (SMAW) Machine
SELF-LEARNING KIT
INDUSTRIAL ARTS
BASIC SET-UP OF A
SHIELDED METAL ARC WELDING (SMAW) MACHINE
3
This Self-Learning Kit was conceptualized and developed by the
LEARNING RESOURCES MANAGEMENT AND DEVELOPMENT SECTION (LRMDS)
SCHOOLS DIVISION OF BATAAN
EDGAR E. GARCIA
Education Program Supervisor, LRMDS
ROSITA P. SERRANO JOAN T. BRIZ RICHARD M. ALBORO
Librarian II Project Development Officer II Information Technology Officer II
COPYRIGHT NOTICE
Section 9 of Presidential Decree No. 49 provides:
No copy shall subsist in any work of the Government of the Philippines. However, prior approval of the government agency or
office wherein the work is created shall be necessary for exploitation of such work for profit. Such agency or office may, among other
things, impose as a condition the payment of royalties...
A “Work of the Government of the Philippines” is a work created by any officer or employee of the Philippine Government or
any of its subdivisions and instrumentalities, including government owned or controlled corporations as a part of his regularly prescribed
official duties.
Notwithstanding the foregoing provisions, the Government is not precluded from receiving and holding copyright transferred to
it by assignment, bequests or otherwise; nor shall publication or republication by the Government in a public document of any work in
which copyright is subsisting be taken to cause any abridgment or annulment of the copyright or to authorize any use of appropriation
of such work without the consent of the copyright proprietor.
This Self-Learning Kit was conceptualized and developed by the Learning Resources Management and Development Section
of the Department of Education Region III – Schools Division of Bataan. It can be reproduced, used, copied, printed or reprinted for
educational purposes use only, but the source must be clearly acknowledged. This storybook can also be modified for the purpose of
translation into another language or dialect, but the original work must be documented. Derivatives of the work including creating an
edited version, an enhancement or a supplementary work are permitted provided all original works are credited and the copyright is
attributed. No work may be derived from this material for commercial purposes or profit.
PREFACE
This Self-Learning Kit (SLK) will enhance your ability to identify the different Shielded Metal Arc
Welding (SMAW) machine parts and accessories. This material is designed for Grade 9 to 12 students
who need remediation and who are willing to learn in self-paced mode.
You must be familiar with the parts and accessories of a Shielded Metal Arc Welding (SMAW)
machine because it is vital in producing good quality welds. To achieve the Learning Outcomes (Set-
up welding machine and its accessories) in Shielded Metal Arc Welding NC I, this kit is mainly focused
on the different parts, functions, and accessories of a Shielded Metal Arc Welding (SMAW) machine.
For you to start, remember to do the following tips to successfully achieve the objectives
of the Self-Learning Kit; keep the material in good condition and neat all the time; do not write
any unnecessary things on its pages; use separate paper for your answer sheet; read and follow
instructions carefully; answer the given task before you start the lesson; take note and record points
of clarification; try to achieve at least 80% level of proficiency in every activity; work diligently and
honestly; answer the activities thoroughly and find out the given descriptors in the progress chart after
having self-evaluation of the activities.
5
Self-Learning Kit in Industrial Arts
OBJECTIVES
At the end of the lesson, with at least 80% level of proficiency, you should be able to:
1. identify the parts and functions of a Shielded Metal Arc Welding (SMAW)
machine in accordance with the manufacturer’s manual;
2. list down safety precautions in a Shielded Metal Arc Welding (SMAW)
machine set-up; and
3. produce the proper set-up of a Shielded Metal Arc Welding (SMAW) machine.
LEARNING COMPETENCIES
Set up a Shielded Metal Arc Welding (SMAW) machine and its accessories correctly.
TLE_IAAW9-12SW-Ih-1, TLE_IAAW9-12SW-Ih-2
6
Basic Set-up of a Shielded Metal Arc (SMAW) Machine
The Shielded Metal Arc Welding (SMAW) machine is important in producing good
quality welds. It is important that you knowthe machine’s parts.
Before we start, let me see if you can identify the parts of the welding machine as
shown in the figures below.
1. _________________________
2. _________________________
3.__________________________
7
Self-Learning Kit in Industrial Arts
Were you able to identify the SMAW machine parts? To fully understand the set-up of
a SMAW machine, continue reading this SLK.
8
Basic Set-up of a Shielded Metal Arc (SMAW) Machine
These are the parts and functions of a SMAW machine and its accessories.
1. Carry handle - used to transport the welding machine
2. Current setting gauge - indicates the current setting of the welding machine
10. Welding shield - used to protect the eyes and face of the welder
9
Self-Learning Kit in Industrial Arts
The function of a Shielded Metal Arc Welding (SMAW) machine is to provide the required
current and voltage to maintain an arc between the electrode and the base metal and sufficiently
supply electricity to fuse the base metal and the end of the electrode.
The SMAW machine depending on the type and capability can provide direct current (DC) or
alternating current (AC) to the electrode. AC type SMAW machines are most common and cost less
than the DC types, however, in terms of operational costs and functionality the DC or Rectifier type
machines present more advantages.
AC Transformers
DC Generators
An internal combustion engine rotates the
armature of the generator, generates electricity
which in turn powers the welding machine. Normally
used when no AC power
source is available.
10
Basic Set-up of a Shielded Metal Arc (SMAW) Machine
Types of Power Sources of a Shielded Metal Arc Welding (SMAW) Machine
Transformer Rectifier
Converts AC voltage to DC voltage via the rectifiers, which in turn supplies DC volt-
age to the electrode.
REMINDER:
1. Make sure that all the parts of the welding machine are working properly.
4. Replace if not repair worn out parts, do not use malfunctioning parts or accessories.
5. Do not connect the SMAW machine to its power source while doing the
SMAW machine set- up.
11
Self-Learning Kit in Industrial Arts
REMEMBER
To be able to perform a SMAW process you must be familiar with the parts and acces-
sories of a Shielded Metal Arc Welding (SMAW) machine.
12
Basic Set-up of a Shielded Metal Arc (SMAW) Machine
Alright! Let us now see if you really understand your lesson today.
Are you ready for the next activity?
ACTIVITY 1A
Identify the parts of a Shielded Metal Arc Welding (SMAW) machine, write the
correct answer on a separate sheet of paper.
1. ___________________ 6. ___________________
2. ___________________ 7. ___________________
3. ___________________ 8. ___________________
4. ___________________ 9. ___________________
5. ___________________ 10. ___________________
13
Self-Learning Kit in Industrial Arts
ACTIVITY 1B
Instructions: Match the SMAW machine parts and its functions. Write only the letter of the
correct answer on a separate sheet of paper.
1. Carry handle a. used to protect the eyes and face of the welder
ACTIVITY 2
Write down five (5) safety precautions in performing a SMAW machine set-up.
1. ____________________________________________________________________
2. ____________________________________________________________________
3. ____________________________________________________________________
4. ____________________________________________________________________
5. ____________________________________________________________________
14
Basic Set-up of a Shielded Metal Arc (SMAW) Machine
ACTIVITY 3
Instructions: Produce the proper set-up of a SMAW process by identifying the Shielded Metal
Arc Welding (SMAW) and its accessories. Write your answers on a separate sheet of paper.
That means you already learned how to set-up a Shielded Metal Arc Welding (SMAW)
machine and its accessories.
15
16
Activity 2
1. Make sure that all the parts of the
weldiing machine are working properly.
2. Check the cables for any insulation
breakage. What do you know?
3. Do not connect the SMAW machine to its
power source while doing the SMAW 1. Electrode holder
set- up. 2. Earth/Ground clamp
4. Replace if not repair worn out parts, do 3. SMAW Machine
not use malfunctioning parts or
accessories. Activity 1A
5. Do not connect the SMAW machine to
its power source while doing the SMAW 1. Carry handle
set- up. 2. Current setting gauge
3. Power switch
Activity 3 4. Current regulating knob
5. Electrode holder
1. Arc welding power source 6. Earth/Ground clamp
2. Input power cable 7. Overload indicator
3. Plug to power source 8. Cooling fan
4. Electrode lead cable 9. Wire brush/chipping hammer
5. Electrode holder 10. Welding shield
6. Electrode
7. Workplace/Base metal Activity 1B
8. Welding table
9. Workpiece connection/Ground 1. J
clamp 2. I
10. Workpiece/ Ground clamp cable 3. H
4. G
5. F
6. E
7. D
8. C
9. B
10. A
ANSWER KEY
Self-Learning Kit in Industrial Arts
Basic Set-up of a Shielded Metal Arc (SMAW) Machine
SELF-ASSESSMENT
RUBRICS OF LEARNING
SCORE SCORE SCORE DESCRIPTORS
1-5 1 - 10 1 - 15
17
Self-Learning Kit in Industrial Arts
ACKNOWLEDGEMENT
The writer would like to extend his sincerest gratitude to the people who contributed
in making this Self-Learning Kit possible.
To the staff of LRMDS Bataan headed by the LRMDS Supervisor, Sir Edgar E. Garcia,
for all the learnings and ideas that the team has given to content developers like me.
To Orani National High School family, especially the school head, Dr. Loreta Michelle
W. Bamba, for the support in this endeavor.
To my family and friends, who believe in me and who are also my inspiration in making
this material.
And most of all, to our Lord Almighty, for giving me this wonderfull life and precious
talent that I could use and share to benefit others.
18
Basic Set-up of a Shielded Metal Arc (SMAW) Machine
REFERENCES
IMAGES
BOOK
Source: Leonilo E. Santelices and Jeffrey G. Morenos, K to 12 Shielded Metal Arc Welding Learner’s Material: Module 1.
Pasig City, Department of Education, 2018 First Edition,51-63
19
BASIC SET-UP OF A SHIELDED METAL ARC WELDING (SMAW) MACHINE
Can you identify the parts of a Shielded Metal Arc Welding (SMAW) machine?
What is the importance of knowing how to set up a Shielded Metal Arc Welding (SMAW)
machine?
If not, then it is very timely to read this Self-Learning Kit and answer all the
activities provided.
C O N T E NT DE VE LO P E RS
WRITER/LAYOUT ARTIST: GIOVANNI POCH N. PEÑAFLOR Finished his Bachelor of Science
in Industrial Technology major in Instrumentation and Control Technology at Rizal
Technological University in May 2004. He is pursuing his Master of Arts in Education
major in Technology and Home Economics at Bataan State Peninsula University
Graduate School. He is currently a Senior High School teacher at Orani National High
School- Main Campus where he teaches General Mathematics and Shielded Metal
Arc Welding. He is also the School Partnership Focal Person for work immersion.