Professional Documents
Culture Documents
50 Hz / 6 0 Hz
Oil Pumps
(Internal gear pumps) TRP INDEX
Pump overview Features/Applications/ Precautions for use Model list Quick reference table of motor output
Specification Items and maximum working pressure
P.1 P.2 P.3 P.8 P.9
Flow
rate Small flow rate Medium flow rate Large flow rate
Pressure
A Type P.10
Small flow, low pressure
Pump only
MA Type P.12
Small flow, low pressure
Equipped with motor
Low pressure
B Type P.30
Small flow, low pressure (reversible type)
Pump only
BHType P.31
Medium flow, low pressure (reversible)
Pump only
MS Type
Small flow, low pressure
P.34
HG/HA Type
Medium flow, medium pressure
P.16
Pump only
MHG/MHA Type
Medium flow, medium pressure
P.20
HCType
Large flow, medium pressure
P.24
Pump only
MHCType
Large flow, medium pressure
P.27
EType P.32
Small flow, medium pressure
Pump only
Relief valve
P.35
2
Oil Pumps
Pump overview (Internal gear pumps) TRP
There is no divider between the internal gear and the external gear. This is an internal gear pump with a gear
chamber that is only formed by the internal and external gears. The tooth shape of the external gear is an arc, and
the tooth shape of the internal gear is formed by the envelope curves of arcs whose center is on the trochoid curve.
The external gear (outer rotor) has one more tooth than the internal gear (inner rotor) and rotates in the same
direction. When the tooth number of the external gear is assumed to be “Z,” the inner tooth is “Z-1.” The rotation
speed ratio of the internal and external gears is Z : Z-1. As the relative speed is extremely small, the tooth profile
wear and noise is reduced.
Suction 1 Suction 2
Suction 3 Discharge
*The areas enclosed by dotted lines show suction ports and discharge ports, respectively.
1
Oil Pumps
(Internal gear pumps) TRP Features / Applications / Specification Items
■ Features
❶Low cost
Low cost compared to other positive displacement type pumps.
❹Easy maintenance
Simple in structure. Also disassembly and inspection is easy.
❺Low-noise
Generates low noise characteristic of internal gears compared to gear pumps and other types of pumps.
❻Small pulsation
Small pulsation of oil flow compared to external gear pumps.
■ Applications
❶ Forced-lubrication
Shafts of various machine tools, marine engines, agricultural engines, other engines, for refrigerators, for
coolers, for reducers, mining machines, for construction machines, for industrial machines, for forge rolling
machines, for press machines, for printing machines, for papermaking machines, for woodworking machines,
for iron & steel manufacturing machines, for various generators, compressors, etc.
❷ Hydraulic drive
Various machine tools, industrial machines, construction machines, printing machines, papermaking
machines, agricultural machines, press machines, mining machines, sugar making machines, woodworking
machines, etc.
❹ Other
For oil controllers, for various oil filters
■ Specification Items
When making an inquiry about a pump, please specify the following items:
1.Intended use Example: forced lubrication or hydraulic drive
2.Type of oil Example: turbine VG32
3.Discharge rate (for one minute or one hour) Example: 5L/min 300L/h
4.Discharge side pressure Example: 1MPa
-1
5.Rotation speed and driving method Example: 1750 min , direct-coupled to the motor
6.Oil temperature during use Example: 20ºC ~ 50 ºC
7.Rotation direction Example: left rotation (L) viewed from the pump shaft side
right rotation (R) viewed from the pump shaft side
2
Oil Pumps
Precautions for use (Internal gear pumps) TRP
For the TRP type, internal gear pump operation under appropriate conditions such as clean petroleum-based
hydraulic oil allows for fewer failures and longtime use with lower maintenance costs.
1.Installation of pump
❶ Coupling
Incorrect centering may cause shaft seal wear, bearing breakage, shaft damage and noise generation.
(For specialized coupling, please consult with our Engineering Division.)
In the case of direct coupling
(A) Joint method (Avoid this method whenever possible as durability low.)
❷ Installation site
Make sure to set the pump suction port above the oil level.
(Failure to do so may cause oil leakage from the shaft seal portion.)
❷ Suction pressure
As the resistance on the suction side becomes higher, there is a possibility that the discharge rate will
decrease and the noise will increase due to cavitation phenomenon.
Set the suction pressure within the range from - 0 . 0 3 MPa to the atmospheric pressure.
❸ Cavitation
When the pressure in the flowing liquid is locally reduced, the containing gas is separated into air bubbles,
causing noise and vibration.
3
Oil Pumps
(Internal gear pumps) TRP Precautions for use
❹ Piping
(i) Make sure to seal the connection of the pipes so that there is no air suction
and no oil leakage.
(ii) Pay careful attention so that no foreign matter such as the seal tape or pipe
burr enters the pump.
(iii)Do not screw pipes excessively because the casing will break.
(iv)Do not apply an excessive force on the pump.
3.Suction strainer
Make sure to install a suction strainer filter on the pump suction side.
(i) It is appropriate that the filtration accuracy is 10 0 – 2 0 0 mesh.
*When many fine particles are mixed, use a separator, etc., to remove them as much as possible.
(ii) Clean the strainer periodically. (Consider the structure of the tank so that it can be easily cleaned.)
(iii) Use a strainer with filtration capacity more than twice as much as the pump discharge rate.
4.Oil tank
① Use a tank with a capacity as large as possible.
(The capacity is approximately three times as much as the pump discharge rate (L/min) .
(i) When the tank capacity is smaller than the pump discharge rate, the oil
temperature rises to accelerate oil deterioration. Return
(ii) A small amount of oil will cause poor suction.
③ Install a baffle plate between the return pipe and the suction pipe to separate
and precipitate air bubbles and foreign matter.
④ Separate the return pipe and the suction pipe from each other as far as possible.
⑤ Provide a vent mechanism (air breather, etc.) so that the pressure fluctuation in the tank will not increase.
Suction
5.Rotation speed of pump
When using high-viscosity (high concentration of) oil, the volumetric efficiency is
decreased and the noise of pump becomes larger at a high-speed rotation.
In this case, low-speed rotation is desirable. When using the oil of proper viscosity,
use low or high speed arbitrarily.
*There is a drain hole on the suction side of the casing. When the pump rotates in the reverse direction, pressure on
the discharge side may be applied to the seal portion through the drain hole to damage the seal.
7.Handling of motor
❶ Inspection
● Whether the output (kW), pole number (P), type, voltage (V), frequency (Hz),
etc., described on the nameplate are as ordered.
● Whether the motor has been damaged by an accident during transportation, etc.
Earth
❷ Installation
● Install the motor above the oil level.
● Do not install the motor in a location with high humidity and dust. Ensure good ventilation.
● Tightly secure the motor according to the bolt dimensions specified by its manufacturer.
❸ Wiring
● Wiring procedure
Perform wiring using excellent tools and equipment according to Electrical Equipment Technical Standards
and the regulations of electric power utilities, referring to the table below. Keep in mind that a voltage drop
will increase as the wiring distance becomes longer.
[Wiring of motor]
Output Excess scale ammeter Minimum wire thickness Minimum grounding wire thickness Local fuse capacity Local switch capacity
(kW) (A) *Note 1(mm) (mm) (A) (A)
0.2 5 1. 6 1. 6 15 15
0.4 5 1. 6 1. 6 15 15
0 .75 5 1. 6 1. 6 15 15
1. 0 10 1. 6 1. 6 15 15
1. 5 10 1. 6 1. 6 15 15
2.2 10 1. 6 1. 6 20 30
3 .7 10 2.0 2.0 30 30
(Note) The minimum wire thickness shows the case of storing three wires in metallic pipe wiring.
● Grounding (Earth)
Because the insulator of a motor is both an insulator and a dielectric, a motor has a capacitance between the
motor frame and the ground. In the non-grounded case, induced voltage (approx. 5 0 - 6 0 % of power-supply
voltage) may be generated in proportion to this capacitance. Therefore, make sure to carry out grounding
construction for a motor in accordance with Articles 18 – 2 8 in the Electrical Equipment Technical Standards
to prevent an accident due to electric shock. And use the screws for grounding in the terminal box of the
motor or at the bottom of its frame (refer to the drawing above.)
● Terminal box
The position of a terminal box can be changed to right/left or top/bottom in steps of 9 0 ° by removing the
screws in the box. (The position of the terminal box ( 7 5 W to 4 0 0 W) can be changed only up and down in
steps of 18 0 ° )
❹ Start
● Whether the connection and ground to the supply are reliably connected.
● Whether the motor rotates in the specified direction (by an arrow). (When the motor starts and stops,
it can be confirmed by the fan rotation.)If the motor rotates in the reverse direction (confirm it by
inching motion), change two of the three power supplies (in the case of a 3 -phase motor).
● Confirm that the valves and cocks in the piping route are fully opened.
● When the motor starts, suction and discharge will start in a few seconds.
● Check the discharge pressure.
When a pressure that exceeds the allowable pressure (described on the nameplate) is detected, immediately
stop the running of motor. (Excessive pressure may cause a motor to burn out.)
5
Oil Pumps
(Internal gear pumps) TRP Precautions for use
1 Insufficient a.Low oil level in tank Increase the oil level by supplying oil.
discharge b.Poor suction Inspect clogging of the suction pipe and filter
rate c.Poor pump rotation and air infiltration.
d.Inappropriate oil viscosity Inspect whether the pump rotation is normal.
e.Misalignment of valves Check the oil viscosity.
Inspect whether there is foreign matter.
Adjust the valves.
2 Decrease in a.Cause for any one of Item 1. Perform according to the countermeasures for
pressure b.Large internal leakage cause of Item 1.
c.Large external leakage Inspect the cylinder valve
Replace the damaged packing and seal
Repair the wear surface
Inspect the pump, valve and pipe
4 Oil leakage a.Incorrect piping Inspect whether the pipe connection method is
b.Breakage of packing and seal appropriate,
whether packing and seal are broken, and
whether the materials are appropriate.
5 Irregular operation a.Entry of foreign matter Inspect entry of foreign matter and breakage due
of valve b.Valve breakage to wear, etc.
7 Irregular machine a.Air infiltration Inspect the sealing of the pipe connection, sliding
operation b.Failure of sliding portion and entry part and bearing.
of foreign matter Inspect excessive tightening of the packing, entry
of foreign matter, wear, etc.
6
Oil Pumps
Precautions for use (Internal gear pumps) TRP
10.Spare parts
●Seals
●Spring specification (When equipped with a motor, a spring must be used within the range
of motor capacity.)
A-DB
Nominal designation Specification (for MPa)
A-1 0 .10 ∼0 . 3 0
A- 2 0 . 3 0 ∼0 . 6 0
A- 3 0.60∼
H-DB
Nominal designation Specification (for MPa)
H-1 0 .10 ∼0 .15
H- 2 0 .15∼0 . 20
H- 3 0 . 20 ∼0 . 29
H- 4 0 . 29 ∼0 . 5 9
H- 5 0 . 5 9 ∼1. 0 8
H- 6 1. 0 8∼2.16
H-7 2.16∼3 . 20
HC-DB
Nominal designation Specification (for MPa)
HC-1 0 .10 ∼0 . 20
HC- 2 0 . 20 ∼0 . 3 9
HC- 3 0 . 29 ∼0 . 4 9
HC- 4 0 . 3 9 ∼0 .78
HC- 5 0 . 5 9 ∼1. 47
HC- 6 1. 47∼2. 4 5
HC-7 1. 9 6∼2. 9 4
HC- 8 3 . 4 3∼3 . 9 2
7
Oil Pumps
(Internal gear pumps) TRP Model List
2
All the maximum discharge pressures described in this catalog are displayed based on a viscosity of 5 6 mm /s (cSt).
When the viscosity falls outside of the available viscosity ranges shown on page 37, the performance and durability
may vary. Please contact us.
The maximum discharge pressure is 0 4 9 MPa in the case of high-temperature specification, and 0 . 9 8 MPa in the
case of coolant specification.
Page
discharge
rotation speed Equipped with motor
pressure -1
Pump
1000min-1 1500min-1 1800min-1 (MPa) (min ) IN OUT only
Type 25 W 75 W 100W 200W 400W 750W 1.5kW
TRP-MS 0 3 ー 0.45 0.54 0.49 Rating 1/8 1/8 4.0 ー ー ー ー ー ー ー 34
TRP-MS 0 5 ー 0 .75 0.90 0.49 Rating 1/8 1/8 4.0 ー ー ー ー ー ー ー 34
TRP-10 A 1. 0 1. 6 1. 9 0.49 20 0 0 1/8 1/8 ー 6.5 7. 0 7. 2 ー ー ー 0.5 10
〜
TRP-HG 6 6 .1 9.2 11.1 3.2 20 0 0 1/2 1/2 11. 5 13 . 5 20 . 5 26 . 5 2. 8
TRP-HG 8 8.2 12. 3 14 . 8 3.2 20 0 0 1/2 1/2 ー ー ー 11. 5 13 . 5 20 . 5 26 . 5 2. 9
19
TRP-HG10 10 . 3 15 . 4 18 . 5 1. 9 6 20 0 0 3/4 3/4 ー ー ー ー 14 . 0 21. 0 27. 0 3.0
TRP-HG12 12. 3 18 . 5 2 2. 3 1. 9 6 20 0 0 3/4 3/4 ー ー ー ー 14 . 0 21. 0 27. 0 3.2
* When a pressure exceeding the maximum discharge pressure is required, please contact us accordingly.
〜
TRP-HA16 15 . 9 23 . 9 28 .7 1. 9 6 18 0 0 3/4 3/4 14 . 5 21. 5 27. 5 3 .1
TRP-HA18 17.7 26 . 6 31. 9 1. 9 6 18 0 0 3/4 3/4 ー ー ー ー 14 . 5 21. 5 27. 5 3.2
19
TRP-HA 20 20 .7 31. 0 37. 2 1. 9 6 18 0 0 3/4 3/4 ー ー ー ー 15 . 0 2 2. 0 28 . 0 3.3
8
Quick reference table of motor output Oil Pumps
and maximum working pressure (Internal gear pumps) TRP
The maximum working pressures of MHG/MHA type and MHC/MHCB type are set by the output of motors to be
combined. Select the maximum working pressure from the following Quick reference table:
9
Oil Pumps Small flow, low pressure
(Internal gear pumps) TRP Pump only A
■ Applications ■ Performance Curve
100
Various machine tools/industrial machines,
40
■ Description of types 20
0
(L)…Standard 0.1 0.2 0.3 0.4 0.5
TRP - □ A - □ - (R) Discharge pressure (MPa) Oil used: Turbine #56
Oil temperature: 25ºC
① ② ③ ④
Efficiency (%)
P=0.10MPa
80
P=0.29MPa
P=0.49MPa
70
60
10 20 30 40 50 60 70
Oil temperature (ºC) Oil used: Turbine #56
Rotation speed: 1000 min
-1
TRP-A
■Assembly drawing
The shape
Details of of axialend
shaft end
8
5 ‒0.1
0
Rotation direction
A
Suction port 68
3×φ7 hole F Discharge port
60
φ
φ30 ‒0.025
D
φ8 ‒0.01
66
0
0
30 °
10
Small flow, low pressure Oil Pumps
A Pump only (Internal gear pumps) TRP
TRP-A-DB
■Assembly drawing
Details of shaft
The shape end
of axial end
5 ‒ 0.1
8
0
Rotation direction
A 70
3×φ7 hole F 15 68
φ30 ‒ 0.025
D
φ8 ‒ 00.01
66
The photo shows TRP-10A-DB.
0
30°
E
30°
Please note that the paint color, etc. may partially H G
differ from the photo. 19.5 B
C
TRP-A-DBT
■Assembly drawing
Details of of
The shape shaft
axialend
end
5 ‒ 0.1
8
0
Rotation direction
A 70
3×φ7 hole F 15 68
D
φ8 ‒ 00.01
E
30°
Please note that the paint color, etc. may partially H G Drain hole
ドレン孔 8
differ from the photo. 19.5 B (Rc1/8)
C
11
Oil Pumps Small flow, low pressure
(Internal gear pumps) TRP Equipped with motor MA
■ Applications
Various machine tools, industrial machines, etc.
■ Description of types
TRP - M A □ J - □ - □ □(
(L)…Standard
R)
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
④ Coupling type
⑤ Relief valve (Blank: without DB, DB, DBT)
⑥ Motor output ( 0 . 075 kW ( 75 ), 0 .1 kW (10 0 ), 10 0 W (1), 0 . 2 kW/ 2 0 0 W ( 2 )) Please note that the paint color, etc. may partially differ
⑦ Motor specification (W, TK, SP, EK) from the photo.
⑧ Rotation direction
φ8
12
Small flow, low pressure Oil Pumps
MA Equipped with motor (Internal gear pumps) TRP
TRP-MAJ-75W
Rotation direction
■ Assembly drawing A
Suction
port 118
Discharge
port
76 132 B 118
C 68
φ
143
22
122
63
D
2.3
40 40 50 50
100 135
1 2 Sliding distance
7
Mounting hole
*The dimensions A and B in the table are 16 mm longer for DB, and 2 2 mm longer for DBT.The drain hole size of DBT is Rc1 / 8 .
TRP-MAJ-100W
Rotation direction
■ Assembly drawing A
Suction
port 118
Discharge
port
76 132 B 118
C 68
143
122
φ
22
63
D
2.3
40 40 50 50
100 135
1 2 Sliding distance
7
Mounting hole
*The dimensions A and B in the table are 16 mm longer for DB, and 2 2 mm longer for DBT.The drain hole size of DBT is Rc1 / 8 .
13
Oil Pumps Small flow, low pressure
(Internal gear pumps) TRP Equipped with motor MA
TRP-MAJ-2 TK
Rotation direction
■ Assembly drawing A 123
93 137 B 116
Suctionport Discharge port
C 68
126
122
φ22
63
D
3.2
40 40 50 50
100 130
7
21
Mounting hole
*The dimensions A and B in the table are 16 mm longer for DB, and 2 2 mm longer for DBT.The drain hole size of DBT is Rc1 / 8 .
Rotation direction
TRP-MAJ-2 EK
83
A 131
Suctionport Discharge port
■Assembly drawing
96 147 B 68
C
176
137
12
71
D
45 45 56 56
110 150
7
26
Mounting hole
14 *The dimensions A and B in the table are 16 mm longer for DB, and 2 2 mm longer for DBT.The drain hole size of DBT is Rc1 / 8 .
Small flow, low pressure Oil Pumps
MA Equipped with motor (Internal gear pumps) TRP
■ Component drawing
■ Parts table
No. Part name No. Part name
1 Casing 15 Adjusting screw
2 Outer rotor 16 Hexagon nut
3 Inner rotor 17 Cap
4 Shaft 18 Hexagon head bolt
5 Dowel pin 19 Spring washer
6 Oil seal S 8 2 27 20 Coupling
7 Retaining ring 21 Motor
8 O-ring 2 × 32 × 3 6 22 Key
9 Valve case 23 Hexagon head bolt
10 Valve element 24 Spring washer
11 Spring 25 Casing cover
12 Spring retainer 26 Hexagon head bolt
13 Connector 27 Spring washer
14 Sheet packing
15
Oil Pumps Medium flow, medium pressure
(Internal gear pumps) TRP Pump only HG/HA
■ Features
Coolant specification (CL) and thermal specification (VT) are available.
■ Description of types
TRP - H GA □ □ - □(L)
(R)
…Standard
① ② ③ ④ ⑤ ⑥
① Model (H type)
② Type (G, A)
③ Discharge rate ( 3 - 2 0 (G: 3 – 12 , A:14 – 2 0 ))
④ Installation method (F, L)
⑤ Relief valve (Blank: without DB, DB, DBT)
⑥ Rotation direction The photo shows TRP-HG6L-DB.
Please note that the paint color, etc. may partially differ
■ Performance curve from the photo.
100
Volumetric efficiency
80
Efficiency (%)
60
Pump efficiency
40
20
0
1 2 3 4
Discharge pressure (MPa) Oil used: Turbine #56
■ Oil temperature and volumetric efficiency TRP-HG 3 0.060 0 . 0 62 0.083 0 .115 0 .13 8 0 .19 4
TRP-HG 4 0 . 079 0.083 0 .111 0 .15 3 0 .18 5 0 . 25 9
100
TRP-HG 6 0 .120 0 .124 0 .16 6 0 . 23 0 0 . 277 0.389
90
TRP-HG 8 0 .15 9 0 .16 6 0 . 222 0 . 3 07 0 . 370 0 . 519
Efficiency (%)
80 Discharge pressure
P=0.10MPa
TRP-HG10 0 .19 9 0 . 20 8 0 . 277 0.384 0 . 4 62 0.649
70 P=0.49MPa TRP-HG12 0 . 24 0 0 . 24 9 0.333 0 . 4 61 0 . 555 0 .779
P=0.98MPa
60 P=1.47MPa TRP-HA14 0 . 279 0 . 291 0.388 0.538 0.648 0.909
P=1.96MPa TRP-HA16 0 . 319 0.333 0.444 0 . 615 0 .74 0 1. 0 3 8
50
10 20 30 40 50 60 70 TRP-HA18 0.360 0 . 375 0.499 0 . 6 92 0.833 1.16 8
Oil temperature (ºC) Use oil: Turbine #56
Rotation speed: 1000 min
-1 TRP-HA 20 0.399 0 . 416 0 . 555 0 .76 9 0 . 925 1. 4 61
16
Medium flow, medium pressure Oil Pumps
HG/HA Pump only (Internal gear pumps) TRP
TRP-HG
■ Assembly drawing
0
4 ‒ 0.02
13
16
Rotation direction
Details
Detailsofofshaft
axial end
end
C
80 B Suction port 95 Discharge port
35
φ14 ‒ 0.01
13
0
The photo shows TRP-HG6.
61
2.31
2.31
26
‒ 0.010
φ47 ‒ 0.034
φ38
Please note that the paint color, etc. may partially
(33)
26
differ from the photo.
6.5 20
38 23 38 A 26 26 2×φ9 Mounting hole
*When a pressure exceeding the maximum discharge pressure is required, please contact us accordingly.
TRP-HA
■ Assembly drawing
0
4 ‒ 0.02
13
16
Rotation direction
Details
Details of shaftend
of axial end
C
81 B Suction port 95 Discharge port
35
13
φ14 ‒ 0.01
0
63.5
3.4
3.4
26
‒ 0.010
φ47 ‒ 0.034
φ40
(32)
26
17
Oil Pumps Medium flow, medium pressure
(Internal gear pumps) TRP Pump only HG/HA
TRP-HGL-DB
■ Assembly drawing
0
4 ‒ 0.02
13
16
Rotation direction
Detailsofofaxial
Details shaft end
end C
80 B 102
38 A 95 Discharge port
35
φ14 ‒ 0.01
79.5
0
13 Suction port
2.31
133.5
φ38
56.31
The photo shows TRP-HG6L-DB. 6.5 20
5 4
13
Please note that the paint color, etc. may partially
differ from the photo. 38 23 38 13 86
4×φ9
64 Mounting hole 106
*When a pressure exceeding the maximum discharge pressure is required, please contact us accordingly.
TRP-HAL-DB
0
■ Assembly drawing
4 ‒ 0.02
16
13
Detailsofofaxial
shaft Rotation direction
Details endend
C
81 B 102
35 40 A 95 Discharge port
13
φ14 ‒ 0.01
82
0
136
3.4
φ40
Suction port
5 4
13
6.5 20
38 23 38 13 86
4×φ9
64 Mounting hole 106
18
Medium flow, medium pressure Oil Pumps
HG/HA Pump only (Internal gear pumps) TRP
TRP-HGF-DBT
■ Assembly drawing
0
4 ‒ 0.02
16
13
Rotation direction
Details
Details of
of shaft end
axial end C
80 B 102 Drain hole
47 33 95 (Rp3/8)
38
35
13
Discharge port
Suction port
108
φ14 ‒ 0.01
0
60.5
2.31
2.31
42
‒ 0.10
φ47 ‒ 0.34
φ38
104
(33)
The photo shows TRP-HG6F-DBT.
42
Please note that the paint color, etc. may partially
differ from the photo. 6.5 20
14 38 A 42 42
4×φ8.5
Mounting hole 104
*When a pressure exceeding the maximum discharge pressure is required, please contact us accordingly.
TRP-HAF-DBT
0
4 ‒ 0.02
■ Assembly drawing
16
13
Rotation direction
Details of axial
Details shaftend
end C
81 B 102 Drain hole
47 34 95 (Rp3/8)
38
35
13 Discharge port
φ14 ‒ 0.01
110.5
Suction port
0
63
3.4
42
3.4
‒ 0.10
φ47 ‒ 0.34
φ40
104
(33)
42
6.5 20
14 40 A 4×φ8.5 42 42
Mounting hole 104
19
Oil Pumps Medium flow, medium pressure
(Internal gear pumps) TRP Equipped with motor MHG/MHA
■ Features
① In the case of safety explosion- proof and pressure - proof explosion- proof
electric motors, the pump is equipped with a base.
② Coolant specification (CL) and thermal specification(VT) are available.
(For an assembly drawing, please inquire with us separately.)
■ Description of types
Standard
TRP - M H G
A □□-□-□□- (L)
(R) □
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩
■ Specification table
Theoretical discharge rate (L/min) Maximum discharge pressure (MPa) Theoretical discharge rate (L/min) Maximum discharge pressure (MPa)
Type Type
150 0 min -1 18 0 0 min -1 150 0 min -1 18 0 0 min -1 150 0 min -1 18 0 0 min -1 150 0 min -1 18 0 0 min -1
TRP-MHG 3 - 2 TK 4.3 5.2 1. 0 8 0 .78 TRP-MHG 3 -75 FK-e 4.3 5.2 3.2 3.2
TRP-MHG 4 - 2 TK 6 .1 7. 4 0.69 0.49 TRP-MHG 4 -75 FK-e 6 .1 7. 4 3.2 2. 9 4
TRP-MHG 6 - 2 TK 9.2 11.1 0.39 0 . 29 TRP-MHG 6 -75 FK-e 9.2 11.1 2. 4 5 1. 9 6
TRP-MHG 8 - 2 TK 12. 3 14 . 8 0 . 29 0 . 20 TRP-MHG 8 -75 FK-e 12. 3 14 . 8 1.7 7 1. 67
TRP-MHG 3 - 2EK 4.3 5.2 1. 0 8 0 .78 TRP-MHG10 -75 FK-e 15 . 4 18 . 5 1. 47 1. 27
TRP-MHG 4 - 2EK 6 .1 7. 4 0.69 0.49 TRP-MHG12 -75 FK-e 18 . 5 2 2. 3 1. 27 1. 0 8
TRP-MHG 6 - 2EK 9.2 11.1 0.39 0 . 29 TRP-MHA14 -75 FK-e 2 2. 2 26 . 6 1. 0 8 0.88
TRP-MHG 8 - 2EK 12. 3 14 . 8 0 . 29 0 . 20 TRP-MHA16 -75 FK-e 23 . 9 28 .7 0.88 0.69
TRP-MHG 3 - 4 FK 4.3 5.2 2. 6 5 2.16 TRP-MHA18 -75 FK-e 26 . 6 31. 9 0 .78 0.49
TRP-MHG 4 - 4 FK 6 .1 7. 4 1. 9 6 1. 67 TRP-MHA 20 -75 FK-e 31. 0 37. 2 0.69 0.39
TRP-MHG 6 - 4 FK 9.2 11.1 1. 67 1. 0 8 TRP-MHG 3 -75 SC 4.3 5.2 3.2 3.2
TRP-MHG 8 - 4 FK 12. 3 14 . 8 1. 27 0.88 TRP-MHG 4 -75 SC 6 .1 7. 4 3.2 2. 9 4
TRP-MHG10 - 4 FK 15 . 4 18 . 5 0 .78 0.69 TRP-MHG 6 -75 SC 9.2 11.1 2. 4 5 1. 9 6
TRP-MHG12 - 4 FK 18 . 5 2 2. 3 0.69 0.59 TRP-MHG 8 -75 SC 12. 3 14 . 8 1.7 7 1. 67
TRP-MHA14 - 4 FK 2 2. 2 26 . 6 0.59 0.49 TRP-MHG10 -75 SC 15 . 4 18 . 5 1. 47 1. 27
TRP-MHA16 - 4 FK 23 . 9 28 .7 0.49 0.39 TRP-MHG12 -75 SC 18 . 5 2 2. 3 1. 27 1. 0 8
TRP-MHA18 - 4 FK 26 . 6 31. 9 0.39 0 . 29 TRP-MHA14 -75 SC 2 2. 2 26 . 6 1. 0 8 0.88
TRP-MHA 20 - 4 FK 31. 0 37. 2 0 . 29 0 . 20 TRP-MHA16 -75 SC 23 . 9 28 .7 0.88 0.69
TRP-MHG 3 - 4 EK 4.3 5.2 2. 6 5 2.16 TRP-MHA18 -75 SC 26 . 6 31. 9 0 .78 0.49
TRP-MHG 4 - 4 EK 6 .1 7. 4 1. 9 6 1. 67 TRP-MHA 20 -75 SC 31. 0 37. 2 0.69 0.39
TRP-MHG 6 - 4 EK 9.2 11.1 1. 67 1. 0 8 TRP-MHG 3 -15 FK-e 4.3 5.2 3.2 3.2
TRP-MHG 8 - 4 EK 12. 3 14 . 8 1. 27 0.88 TRP-MHG 4 -15 FK-e 6 .1 7. 4 3.2 3.2
TRP-MHG10 - 4 EK 15 . 4 18 . 5 0 .78 0.69 TRP-MHG 6 -15 FK-e 9.2 11.1 3.2 3.2
TRP-MHG12 - 4 EK 18 . 5 2 2. 3 0.69 0.59 TRP-MHG 8 -15 FK-e 12. 3 14 . 8 3.2 3.2
TRP-MHA14 - 4 EK 2 2. 2 26 . 6 0.59 0.49 TRP-MHG10 -15 FK-e 15 . 4 18 . 5 1. 9 6 1. 9 6
TRP-MHA16 - 4 EK 23 . 9 28 .7 0.49 0.39 TRP-MHG12 -15 FK-e 18 . 5 2 2. 3 1. 9 6 1. 9 6
TRP-MHA18 - 4 EK 26 . 6 31. 9 0.39 0 . 29 TRP-MHA14 -15 FK-e 2 2. 2 26 . 6 1. 9 6 1.7 7
TRP-MHA 20 - 4 EK 31. 0 37. 2 0 . 29 0 . 20 TRP-MHA16 -15 FK-e 23 . 9 28 .7 1.7 7 1. 37
TRP-MHA18 -15 FK-e 26 . 6 31. 9 1. 57 0.98
TRP-MHA 20 -15 FK-e 31. 0 37. 2 1. 37 0 .78
* When a pressure exceeding the maximum discharge pressure is required, please contact
us accordingly.
21
Oil Pumps Medium flow, medium pressure
(Internal gear pumps) TRP Equipped with motor MHG/MHA
TRP-MHG/MHA
■Assembly drawing
H
A 102 Discharge
Suction
D C B port J port
口径位置 HG=2.31
95
HA=3.4
Bore position
K
The photo shows TRP-MHG3-DB-4FK.
L
F F N N
Please note that the paint color, etc. may partially
E M
differ from the photo.
G
G
■ Dimensions (Unit:mm)
K Bore (Rc)
Type A B C D E F G H J L M N
Without DB/DB/DBT Suction, Discharge
TRP-MHG 3 - 2 TK 311 58 16 0 93 10 0 40 7×21 123 116 124/142. 5/171 63 13 0 50 1/2
TRP-MHG 4 - 2 TK 314 61 16 0 93 10 0 40 7×21 123 116 124/142. 5/171 63 13 0 50 1/2
TRP-MHG 6 - 2 TK 319 66 16 0 93 10 0 40 7×21 123 116 124/142. 5/171 63 13 0 50 1/2
TRP-MHG 8 - 2 TK 324 71 16 0 93 10 0 40 7×21 123 116 124/142. 5/171 63 13 0 50 1/2
TRP-MHG 3 - 4 FK 340 58 16 6 116 115 45 7×20 129 14 5 132/15 0 . 5/179 71 14 0 56 1/2
TRP-MHG 4 - 4 FK 343 61 16 6 116 115 45 7×20 129 14 5 132/15 0 . 5/179 71 14 0 56 1/2
TRP-MHG 6 - 4 FK 348 66 16 6 116 115 45 7×20 129 14 5 132/15 0 . 5/179 71 14 0 56 1/2
TRP-MHG 8 - 4 FK 353 71 16 6 116 115 45 7×20 129 14 5 132/15 0 . 5/179 71 14 0 56 1/2
TRP-MHG10 - 4 FK 358 76 16 6 116 115 45 7×20 129 14 5 132/15 0 . 5/179 71 14 0 56 3/4
TRP-MHG12 - 4 FK 363 81 16 6 116 115 45 7×20 129 14 5 132/15 0 . 5/179 71 14 0 56 3/4
TRP-MHA14 - 4 FK 360 77 167 116 115 45 7×20 129 14 5 13 4 . 5/15 3/181. 5 71 14 0 56 3/4
TRP-MHA16 - 4 FK 362 79 167 116 115 45 7×20 129 14 5 13 4 . 5/15 3/181. 5 71 14 0 56 3/4
TRP-MHA18 - 4 FK 365 82 167 116 115 45 7×20 129 14 5 13 4 . 5/15 3/181. 5 71 14 0 56 3/4
TRP-MHA 20 - 4 FK 370 87 167 116 115 45 7×20 129 14 5 13 4 . 5/15 3/181. 5 71 14 0 56 3/4
TRP-MHG 3 -75 FK-e 372 58 173 141 125 50 10×25 13 6 16 3 141/15 9 . 5/18 8 80 16 0 6 2. 5 1/2
TRP-MHG 4 -75 FK-e 375 61 173 141 125 50 10×25 13 6 16 3 141/15 9 . 5/18 8 80 16 0 6 2. 5 1/2
TRP-MHG 6 -75 FK-e 380 66 173 141 125 50 10×25 13 6 16 3 141/15 9 . 5/18 8 80 16 0 6 2. 5 1/2
TRP-MHG 8 -75 FK-e 385 71 173 141 125 50 10×25 13 6 16 3 141/15 9 . 5/18 8 80 16 0 6 2. 5 1/2
TRP-MHG10 -75 FK-e 390 76 173 141 125 50 10×25 13 6 16 3 141/15 9 . 5/18 8 80 16 0 6 2. 5 3/4
TRP-MHG12-75 FK-e 395 81 173 141 125 50 10×25 13 6 16 3 141/15 9 . 5/18 8 80 16 0 6 2. 5 3/4
TRP-MHA14 -75 FK-e 392 77 174 141 125 50 10×25 13 6 16 3 14 3 . 5/16 2/19 0 . 5 80 16 0 6 2. 5 3/4
TRP-MHA16 -75 FK-e 394 79 174 141 125 50 10×25 13 6 16 3 14 3 . 5/16 2/19 0 . 5 80 16 0 6 2. 5 3/4
TRP-MHA18 -75 FK-e 3 97 82 174 141 125 50 10×25 13 6 16 3 14 3 . 5/16 2/19 0 . 5 80 16 0 6 2. 5 3/4
TRP-MHA 20 -75 FK-e 402 87 174 141 125 50 10×25 13 6 16 3 14 3 . 5/16 2/19 0 . 5 80 16 0 6 2. 5 3/4
TRP-MHG 3 -15 FK-e 417 58 211 14 8 15 5 6 2. 5 φ10 14 9 18 0 151/16 9 . 5/19 8 90 170 70 1/2
TRP-MHG 4 -15 FK-e 420 61 211 14 8 15 5 6 2. 5 φ10 14 9 18 0 151/16 9 . 5/19 8 90 170 70 1/2
TRP-MHG 6 -15 FK-e 425 66 211 14 8 15 5 6 2. 5 φ10 14 9 18 0 151/16 9 . 5/19 8 90 170 70 1/2
TRP-MHG 8 -15 FK-e 430 71 211 14 8 15 5 6 2. 5 φ10 14 9 18 0 151/16 9 . 5/19 8 90 170 70 1/2
TRP-MHG10 -15 FK-e 435 76 211 14 8 15 5 6 2. 5 φ10 14 9 18 0 151/16 9 . 5/19 8 90 170 70 3/4
TRP-MHG12-15 FK-e 440 81 211 14 8 15 5 6 2. 5 φ10 14 9 18 0 151/16 9 . 5/19 8 90 170 70 3/4
TRP-MHA14 -15 FK-e 4 37 77 212 14 8 15 5 6 2. 5 φ10 14 9 18 0 15 3 . 5/172/20 0 . 5 90 170 70 3/4
TRP-MHA16 -15 FK-e 439 79 212 14 8 15 5 6 2. 5 φ10 14 9 18 0 15 3 . 5/172/20 0 . 5 90 170 70 3/4
TRP-MHA18 -15 FK-e 4 42 82 212 14 8 15 5 6 2. 5 φ10 14 9 18 0 15 3 . 5/172/20 0 . 5 90 170 70 3/4
TRP-MHA20 -15 FK-e 4 47 87 212 14 8 15 5 6 2. 5 φ10 14 9 18 0 15 3 . 5/172/20 0 . 5 90 170 70 3/4
22
Medium flow, medium pressure Oil Pumps
MHG/MHA Equipped with motor (Internal gear pumps) TRP
102
● In the case of 2 EK and 4 EK
H
A Suction J Discharge
D C B port 95
port
口径位置 HG=2.31
HA=3.4
Bore position
K
L
E
F F N N
E M
G
G
A I
位置 HG=2.31
HA=3.4
Suction J
D C B port Discharge port
径position
Bore
口
K
L
F F N N
E M
G
G
■ Dimensions (Unit:mm)
K Bore (Rc)
Type A B C D E F G H J L M N
Without DB/DB/DBT Suction, Discharge
TRP-MHG 3 - 2EK 324 58 170 96 110 45 7×26 83 131 176/176/179 71 15 0 56 1/2
TRP-MHG 4 - 2EK 327 61 170 96 110 45 7×26 83 131 176/176/179 71 15 0 56 1/2
TRP-MHG 6 - 2EK 3 32 66 170 96 110 45 7×26 83 131 176/176/179 71 15 0 56 1/2
TRP-MHG 8 - 2EK 3 37 71 170 96 110 45 7×26 83 131 176/176/179 71 15 0 56 1/2
TRP-MHG 3 - 4 EK 3 52 58 178 116 125 50 10×25 80 14 5 171/171/18 8 80 16 0 6 2. 5 1/2
TRP-MHG 4 - 4 EK 355 61 178 116 125 50 10×25 80 14 5 171/171/18 8 80 16 0 6 2. 5 1/2
TRP-MHG 6 - 4 EK 360 66 178 116 125 50 10×25 80 14 5 171/171/18 8 80 16 0 6 2. 5 1/2
TRP-MHG 8 - 4 EK 365 71 178 116 125 50 10×25 80 14 5 171/171/18 8 80 16 0 6 2. 5 1/2
TRP-MHG10 - 4 EK 370 76 178 116 125 50 10×25 80 14 5 171/171/18 8 80 16 0 6 2. 5 3/4
TRP-MHG12 - 4 EK 375 81 178 116 125 50 10×25 80 14 5 171/171/18 8 80 16 0 6 2. 5 3/4
TRP-MHA14 - 4 EK 372 77 179 116 125 50 10×25 80 14 5 171/171/19 0 . 5 80 16 0 6 2. 5 3/4
TRP-MHA16 - 4 EK 374 79 179 116 125 50 10×25 80 14 5 171/171/19 0 . 5 80 16 0 6 2. 5 3/4
TRP-MHA18 - 4 EK 37 7 82 179 116 125 50 10×25 80 14 5 171/171/19 0 . 5 80 16 0 6 2. 5 3/4
TRP-MHA 20 - 4 EK 382 87 179 116 125 50 10×25 80 14 5 171/171/19 0 . 5 80 16 0 6 2. 5 3/4
TRP-MHG 3 -75 SC 4 37 58 20 0 179 125 50 10×20 — 165 . 2 151/16 9 . 5/19 8 90 175 70 1/2
TRP-MHG 4 -75 SC 440 61 20 0 179 125 50 10×20 — 165 . 2 151/16 9 . 5/19 8 90 175 70 1/2
TRP-MHG 6 -75 SC 445 66 20 0 179 125 50 10×20 — 165 . 2 151/16 9 . 5/19 8 90 175 70 1/2
TRP-MHG 8 -75 SC 450 71 20 0 179 125 50 10×20 — 165 . 2 151/16 9 . 5/19 8 90 175 70 1/2
TRP-MHG10 -75 SC 455 76 20 0 179 125 50 10×20 — 165 . 2 151/16 9 . 5/19 8 90 175 70 3/4
TRP-MHG12 -75 SC 460 81 20 0 179 125 50 10×20 — 165 . 2 151/16 9 . 5/19 8 90 175 70 3/4
TRP-MHA14 -75 SC 4 57 77 201 179 125 50 10×20 — 165 . 2 15 3 . 5/172/20 0 . 5 90 175 70 3/4
TRP-MHA16 -75 SC 459 79 201 179 125 50 10×20 — 165 . 2 15 3 . 5/172/20 0 . 5 90 175 70 3/4
TRP-MHA18 -75 SC 462 82 201 179 125 50 10×20 — 165 . 2 15 3 . 5/172/20 0 . 5 90 175 70 3/4
TRP-MHA 20 -75 SC 4 67 87 201 179 125 50 10×20 — 165 . 2 15 3 . 5/172/20 0 . 5 90 175 70 3/4
23
Oil Pumps Large flow rate & medium pressure
(Internal gear pumps) TRP Pump only HC
■ Features
① Maximum discharge pressure: 3 . 9 2 MPa
② Maximum discharge rate: 10 0 L/min
③ Ideal for transfer and lubrication.
④ Heat resistant type(VT) is available.
■ Description of types
TRP - HC □ L - □ -(L)
(R)…Standard
① ② ③ ④
■ Performance curve
-1
1.Use the pump at a rotation speed of 1200 min or lower,
whenever possible.
2.Please contact us when using kerosene, etc.
100
Volumetric
efficiency
80
60
Efficiency (%)
ncy
cie
effi
40
mp
Pu
20
0
1 2 3 4
Discharge pressure (MPa)
Oil used: Turbine #56
Oil temperature: 25ºC
90
Efficiency (%)
80 Discharge pressure
P=0.10MPa
70 P=0.49MPa
P=0.98MPa
60
P=1.47MPa
P=1.96MPa
50
0 20 30 40 50 60 70
24
Large flow rate & medium pressure Oil Pumps
HC Pump only (Internal gear pumps) TRP
回 転 direction
Rotation 方向
軸端詳
Details of細
shaft end
243
50 A
42
22 ‒ 0.01
吸 込port
Suction 口 吐 出 口 port
Discharge
0
147
16
75
71
110 4×φ12
4×φ12hole
孔 140
25
Oil Pumps Large flow, medium pressure
(Internal gear pumps) TRP Pump only HC
TRP-HC-DB
■Assembly drawing
0
7 ‒ 0.02
25
21
回転方
Rotation 向
direction
Details
軸 端of詳shaft
細 end
243 112
50
42 A
22 ‒ 0.01
吸 込 port
Suction 口 吐 出 口 port
Discharge
0
170
4
The photo shows TRP-HC30L-DB.
75
16
71
Please note that the paint color, etc. may partially
differ from the photo. 116
70
110 4×φ12
4×φ12hole
孔 140
TRP-HC-DBT
■Assembly drawing
0
7 ‒ 0.02
25
21
回 転 方direction
Rotation 向
軸端
Details of詳shaft
細 end Drain
112 ド レ ン hole
孔
243
168 Rp1/ 2
129.5 113.5
Suction
吸 込port
口 Discharge
吐 出 口 port
50 A
22 ‒ 0.01
42
0
220
70 116
110 4×φ12
4×φ12hole
孔 140
26
Large flow, medium pressure Oil Pumps
MHC Equipped with motor (Internal gear pumps) TRP
■ Features
① In the case of safety explosion-proof and pressure-proof explosion-proof
electric motors, the pump is equipped with a base.
② Coolant specifications (CL) and thermal specifications (VT) are available.
*Keep in mind that HC type (for common base) cannot be directly connected to this motor.
■ Description of types
Standard
TRP - M HC □ □ - □ - □ FK- (R)
( L) □
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨
■ Component drawing
■ Parts table
No. Part Name No. Part Name No. Part Name
1 Casing 13 Coupling 25 O-ring P 10 A
2 Bearing case 14 Oil seal D 25 4 511 26 Sheet packing
3 Bearing cover 15 O-ring G 8 5 27 Sheet packing
4 Companion flange 16 O-ring G 4 5 28 Sheet packing
5 Seal cover 17 Cap 29 Sheet packing
6 Valve case 18 Connector 30 Dowel pin
7 Inner rotor 19 Valve element 31 Hexagon head bolt
8 Outer rotor 20 Spring 32 Hexagon head bolt
9 Shaft 21 Spring retainer 33 Hexagon head bolt
10 Key 22 Adjusting screw 34 Hexagon socket head cap screw
11 Key 23 Hexagon head bolt 35 Hexagon head bolt
12 Ball bearing 6 3 0 5 24 O-ring P 18 36 Hexagon head bolt
27
Oil Pumps Large flow, medium pressure
(Internal gear pumps) TRP Equipped with motor MHC
TRP-MHC
Rotation direction
■ Assembly drawing
回転方 向
D
A
B C Suction
吸 込port
口 168 Discharge
吐出口 port
77.5
4
G
Motor specifications
J
Totally-enclosed fan-cooled indoor type
Thermal class E, continuous rating
F F E E
H
4×K
I
*such
Inform us any other special specifications
as special voltage, tropical treatment.
■ Specification table
Number of poles 4 P
Bore 15 0 0 min -1 ( 5 0 Hz) 18 0 0 min -1 (6 0 Hz)
Type (Rc)
Theoretical Maximum discharge ressure(MPa) Theoretical Maximum discharge ressure(MPa)
discharge rate discharge rate
Suction Discharge (L/min) 1. 5 kW 2 . 2kW (L/min) 1. 5 kW 2. 2kW
TRP-MHC 3 0 1¼ 1 47.7 0.88 1. 9 6 57. 2 0 . 29 1. 47
TRP-MHC 4 0 1 1 57. 2 0 . 29 1. 47 68.6 ー 0.88
TRP-MHC 5 0 1 1 78 . 2 ー 0.69 93.8 ー 0.49
TRP-MHC 6 5 1 1 97. 3 ー 0.49 116 .7 ー ー
TRP-MHC-DB
Rotation
回 転direction
方向
■ Assembly drawing
D
B C Suction
吸 込port
口 168 Discharge
吐出口 port
100.5
4
Motor specifications
G
■ Specification table
Number of poles 4 P
Bore 15 0 0 min -1 ( 5 0 Hz) 18 0 0 min -1 (6 0 Hz)
Type (Rc)
Theoretical Maximum discharge ressure(MPa) Theoretical Maximum discharge ressure(MPa)
discharge rate discharge rate
Suction Discharge (L/min) 1. 5 kW 2 . 2kW (L/min) 1. 5 kW 2. 2kW
TRP-MHC 3 0 1¼ 1 47.7 0.88 1. 9 6 57. 2 0 . 29 1. 47
TRP-MHC 4 0 1 1 57. 2 0 . 29 1. 47 68.6 ー 0.88
TRP-MHC 5 0 1 1 78 . 2 ー 0.69 93.8 ー 0.49
TRP-MHC 6 5 1 1 97. 3 ー 0.49 116 .7 ー ー
28
Large flow, medium pressure Oil Pumps
MHC Equipped with motor (Internal gear pumps) TRP
TRP-MHC-DBT
Rotation
回 転 方direction
向
■ Assembly drawing D Drain
ドレン hole
孔
A Rp 1/2
Rp1/ 2
B C Suction
吸 込port
口 Discharge
吐出口 port
168
148.5
4
Motor specification
J
Totally-enclosed fan-cooled indoor type
Thermal class E, continuous rating
F F E E
4×K *such
Inform us any other special specifications
as special voltage, tropical treatment.
H I
■ Specification table
Number of poles 4 P
Bore 15 0 0 min ( 5 0 Hz)
-1
18 0 0 min -1 (6 0 Hz)
Type (Rc)
Theoretical Maximum discharge ressure(MPa) Theoretical Maximum discharge ressure(MPa)
discharge rate discharge rate
Suction Discharge (L/min) 1. 5 kW 2 . 2kW (L/min) 1. 5 kW 2. 2kW
TRP-MHC 3 0 -DBT 1¼ 1 47.7 0.88 1. 9 6 57. 2 0 . 29 1. 47
TRP-MHC 4 0 -DBT 1 1 57. 2 0 . 29 1. 47 68.6 ー 0.88
TRP-MHC 5 0 -DBT 1 1 78 . 2 ー 0.69 93.8 ー 0.49
TRP-MHC 6 5 -DBT 1 1 97. 3 ー 0.49 116 .7 ー ー
TRP-MHCB(-DB/-DBT)
Please note that the paint color, etc. may partially differ from the
photo.
■ Specification table
Number of poles 6 P Number of poles 4 P
Bore 10 0 0 min -1 (5 0 Hz) 120 0 min -1 (6 0 Hz) 15 0 0 min -1 (5 0 Hz) 18 0 0 min -1 (6 0 Hz)
Type (Rc) Theoretical Maximum discharge ressure(MPa) Theoretical Maximum discharge ressure(MPa) Theoretical Maximum discharge ressure(MPa) Theoretical Maximum discharge ressure(MPa)
discharge rate discharge rate discharge rate discharge rate
Suction Discharge (L/min) 0.75kW 1.5kW 2.2kW 3.7kW (L/min) 0.75kW 1.5kW 2.2kW 3.7kW (L/min) 1.5kW 2.2kW 3.7kW 5.5kW (L/min) 1.5kW 2.2kW 3.7kW 5.5kW
TRP-MHCB 30 1 1 31.8 0. 29 1.96 3. 24 3.92 38.1 0. 20 1.57 2.65 3.92 47.7 0.88 1.96 3.63 3.92 57. 2 0. 29 1.47 3.04 3.92
TRP-MHCB 40 1 1 38.1 0. 20 1.47 2.65 3.92 45.7 ー 0.98 2.06 3.73 57. 2 0. 29 1.47 3.04 3.92 68.6 ー 0.88 2. 35 3.73
TRP-MHCB50 1 1 52.1 ー 0.96 1.77 3.4 3 62.5 ー 0. 29 1. 27 2.8 4 78. 2 ー 0.69 2.06 3. 33 93.8 ー 0.49 1.57 2.75
TRP-MHCB65 1 1 6 4.8 ー 0.49 1. 27 2.65 77.8 ー ー 0.69 2.06 97. 3 ー 0.49 1.47 2.65 116.7 ー ー 0.98 2.06
29
Oil Pumps Small flow, low pressure (reversible type)
(Internal gear pumps) TRP Pump only B
■ Features
The oil flow direction of the reversible B type pump stays constant even if left
rotation and right rotation are alternately changed.
(Ideal for forced lubrication of various machine tools, lubrication of various
refrigerators, etc.)
■ Description of types
TRP - B □ Y
① ②
① Model (B type)
② Discharge rate ( 12 , 2 0 , 2 7 )
Please note that the paint color, etc. may partially differ from
the photo.
Oil flow
Oil tank
■Assembly drawing
Details of shaft
軸端形 end
状
5 ‒ 0.1
0
Suction
吸 込 口 port
(Rc1/4) 8
‒ 0.05
φ36 ‒ 0.39
11
φ8 ‒ 0.01
60
回 転 direction
0
°
φ5
方向
2
φ67
φ34
77
Rotation
°
0
6
B 20 19
Discharge
吐出口 port 3 ×φ 6. .55 取 付 孔
3×φ6 A
(Rc1/4) mounting hole
1
R1
11
Theoretical discharge rate aximum discharge pressure Maximum rotation speed Bore (Rc) Approx.
Type A B
(L/1000min-1 ) (MPa) (min-1 ) Suction port Discharge port mass (kg)
TRP-B12Y 1. 2 0.49 20 0 0 81 42 1/ 4 1/ 4 1. 0
TRP-B 20Y 1. 8 0.49 20 0 0 84 45 1/ 4 1/ 4 1.1
TRP-B 27 Y 2.7 0.49 20 0 0 89 50 1/ 4 1/ 4 1. 2
30
Medium flow, low pressure (reversible type) Oil Pumps
BH Pump only (Internal gear pumps) TRP
■ Features
A reversible pump equivalent to HG type
■ Description of types
TRP - BH □
① ②
■ Performance curve
100 The photo shows TRP-BH8.
Volumetric efficiency
80
Please note that the paint color, etc. may partially differ
Efficiency (%)
y
c ienc
40 l effi
Tota
20
22
15 150
Suction
吐出 port
口
R20
6
1
1
φ
φ 74 ‒ 0.03
φ140
0
φ88
OUT
I N
φ13
吸込
Dischar 口
geport
10 5 6 ×φmounting
6×φ11 1 1 取 付hole
孔
15 B
A
7 ‒‒ 0.05
0.09
10
Details
軸端 of形shaft
状 end
31
Oil Pumps Small flow, medium pressure
(Internal gear pumps) TRP Pump only E
■ Features
① Designed for high discharge pressure
② The maximum discharge pressure of 1. 9 6 MPa
③ Because a ball bearing is used for the shaft, gear drive and pulley drive are available.
■ Description of types
TRP - E □ L -(L)
(R)
…Standard
① ② ③ ④
① Model (E type)
② Discharge rate
③ Installation method
④ Rotation direction
P=0.49MPa
P=0.69MPa
Efficiency (%)
60 70
y
nc
P=0.98MPa
cie
effi
60
40
tal
To
50
10 20 30 40 50 60 70
20 Oil used: Turbine #56
Oil temperature (ºC)
Rotation speed: 1000 min
-1
0
0.5 1 1.5 2
Discharge pressure (MPa) ■ Shaft power (kW) per1000min -1
■ Component drawing
■ Parts table
No. Part Name No. Part Name No. Part Name
1 Casing 7 Inner rotor 13 O-ring 2 × 32 × 3 6
2 Bearing case 8 Key 14 O-ring S 26
3 Bearing cover 9 Key 15 Retaining ring
4 Shaft 10 Ball bearing 6 201 16 Hexagon head bolt
5 Mounting legs 11 Ball bearing 6 0 8 17 Hexagon socket head cap screw
6 Outer rotor 12 Oil seal D12327 18 Dowel pin
32
Small flow, medium pressure Oil Pumps
E Pump only (Internal gear pumps) TRP
TRP-E
■Assembly drawing
0
3 ‒ 0.02
11.5
Details
軸端 of形shaft
状 end
回転方
Rotation 向
direction
A
28 24.5 B 74
24.5 12 66
13 吸込口
Suction port 48 吐出口
Discharge port
The photo shows TRP-E27.
2
1
1
φ
1.89
‒ 0.02
φ4 4 . 4 ‒ 0.04
48
66
Please note that the paint color, etc. may partially
differ from the photo.
φ1 0 ‒ 0.015
11 4×φ8 .5 孔
4×φ8.5 hole
0
Theoretical discharge rate Maximum discharge pressure Maximum rotation speed Rotor Bore (Rc) Approx.
Type A B
(L/1000min-1 ) (MPa) (min-1 ) width Suction port Discharge port mass (kg)
TRP-E18 1. 8 1. 9 6 20 0 0 10 8 55.5 10 1/4 1/4 1. 2
TRP-E 27 2.7 1. 9 6 20 0 0 113 60.5 15 1/4 1/4 1. 2
TRP-E 3 9 4.0 1. 47 20 0 0 119 66.5 22 3/8 3/8 1. 3
TRP-EL
■Assembly drawing
0
3 ‒ 0.02
11.5
Details
軸 of
端形 shaft
状 end
回転方
Rotation 向
direction
A
28 24.5 B
24.5 12 74
13 Suction
吸込口port 68 吐出口
Discharge port
5
2
1
1
φ
90
12
0
52.5 60
11 38 9 4×φ9hole
4×φ9 孔 84
58 102
Theoretical discharge rate Maximum discharge pressure Maximum rotation speed Rotor Bore (Rc) Approx.
Type A B
(L/1000min-1 ) (MPa) (min-1 ) width Suction port Discharge port mass (kg)
TRP-E18 L 1. 8 1. 9 6 20 0 0 10 8 55.5 10 1/4 1/4 2. 0
TRP-E 27 L 2.7 1. 9 6 20 0 0 113 60.5 15 1/4 1/4 2. 0
TRP-E 3 9 L 4.0 1. 47 20 0 0 119 66.5 22 3/8 3/8 2.1
33
Oil Pumps Small flow, low pressure
(Internal gear pumps) TRP Equipped with motor MS
■ Features
This type is most appropriate for mechanical design in a limited space because
of its small size, light weight, low noise and stable discharge rate.
The mounting of a standard product is a flange type.
① Single phase 5 0 / 6 0 Hz 10 0 / 10 0 V,
3 -phase 5 0 / 6 0 / 6 0 Hz 2 0 0 / 2 0 0 / 2 2 0 / 2 3 0 V
② Rotation direction is left counterclockwise as viewed from non-load side.
■Description of types
TRP - MS03(L)-(DB)
① ② ③ ④
The photo shows TRP-MS03L-DB.
① Pump with motor
② Discharge rate
③ Installation method
Please note that the paint color, etc. may partially differ
④ Relief valve (Blank: without DB, DB) from the photo.
100 100
80
90
Efficiency (%)
60
Discharge pressure P=0.10MPa
40 80
P=0.29MPa
20 P=0.49MPa
70
0
0.1 0.2 0.3 0.4 0.5
60
Discharge pressure (MPa) Oil used: Turbine #56
Oil temperature: 25ºC
10 20 30 40 50 60
Oil temperature (ºC)
Oil used: Turbine #56
■ Assembly drawing
●TRP-MS ●TRP-MSL-DB
Rotation direction
152.5
Rotation direction
152.5 Discharge
85 27 17 Suction port Discharge port 85 27 17 Suction port Relief valve port
43 80 7 43 80
7
28 75 8 8 28 75 87 18 8 15
18
8
φ 5 5 ‒ 0.03
φ7 9
66.5
φ7 9
62
80
62
88
0
48
Applicable cabtyre outer diamteer Plug Applicable cabtyre outer diamteer 35 6.8 102
φ6 ∼ 1 2 1/ 8 B φ6 ∼ 1 2 50 115
4 2×φ5.5 hole
11
*These dimensional outline drawing and specification are available for 3 -phase type. For the single-phase type, please contact us.
34
Oil Pumps
Relief valve (Internal gear pumps) TRP
Packing
The TR type relief valve is a spring direct- acting relief valve. The set pressure can be adjusted by the
combination of a built-in spring and the adjusting screw.
❶ Pressure setting
40
Relief valve is operating
(i) Use as a safety valve Working
*The characteristics such as pressure override vary depending on the viscosity and flow rate of use oil.
Set pressure
❷ Use section of relief valve 0 0.1 0.2 0.3 0.4 0.5
Discharge pressure (MPa)
(i) Use as a safety valve --- DB (Internal bypass)
○ Ideal for prevention of overload because it is a pump-integrated type.
(ii) Use as a safety valve and a pressure-adjusting valve --- DBT (External bypass)
This is a type with a block for external bypass installed on DB.
○ This is ideal when it is necessary to bypass the entire flow rate for a long time (when pushing up and fixing a
cylinder for a certain time, etc.).
(iii) Use as a pressure-adjusting valve --- TR-DB (Bypass on a line)
Also, the valve can be used as a hydraulic pressure-adjusting valve to maintain a constant pressure.
*As for the return piping of the relief valve, minimize the resistance (pressure loss) as much as possible.
DB(Internal bypass) DBT(External bypass)
Suction Discharge
Suction Discharge
TR-DB
Suction Discharge
35
Oil Pumps
(Internal gear pumps) TRP Relief valve
TR-DB-1
■Assembly drawing
54
46 52
32 42 10
4×φ 8.8
4 ×φ 5 . hole
5孔
R
1
0
2×Rc1/8
4
64
50
70
10
Please note that the paint color, etc. may partially differ IN OUT
OUT
from the photo.
TR-DB- 4
■Assembly drawing
76
65.5
62
49.5 16
4×φ9
4 ×φ 9hole
孔 44
R
2×Rc1/2
1
6
76
58
102 11
Please note that the paint color, etc. may partially differ
from the photo.
IN OUT
TR-DB- 6
■Assembly drawing
90
70 94
4 ×φ 9hole
4×φ9 孔 52 71.5 22.5
R
2
2
.5
2×Rc3/4
90
72
112
11
Please note that the paint color, etc. may partially differ
from the photo.
IN OUT
36
Oil Pumps
Relief valve (Internal gear pumps) TRP
■ Viscosity - Temperature
[℃]
170
160
150
VG32
VG83
VG68
VG56
VG46
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
-10
-20
-30
[mm2/s]
10000
5000
2000
1000
500
200
100
50
40
30
20
15
10
9
8
7
6
推奨粘度範囲
Recommended viscosity range
使用可能
Available 粘度範囲range
viscosity
37
Head Office 230, Moriwake, Miyuki-cho, Fukuyama-city, Hiroshima, 720-0003, Japan Tel.+81-84-955-1111 Fax.+81-84-955-5777
Room 1001, 10/F, Olympia Plaza, 255 King s Road, North Point, Hong Kong Tel.+852-2571-0886 Fax.+852-2571-0619
|
150 Moo 16 Udomsorayuth Rd., T.Bangkrasan, A.Bangpa-In, Ayutthaya 13160 Thailand Tel.+66-3522-0640 Fax.+66-3522-1259
No.285, Yuan Qu Road(N), Bei Qiao, Min Hang District, Shanghai 201109, China Tel.+86-21-6490-9128 Fax.+86-21-6490-9126
E-CAT-P-TRP-02-B