This document is a start-up checklist for conducting pre-operation inspections of a hydraulic excavator. It lists various components to check such as fluid levels, filters, electrical systems, undercarriage, and hydraulic systems. Mechanics use the checklist to ensure the excavator is safe to operate by checking for issues like leaks, loose or missing parts, and proper fluid levels. The operator and maintenance engineer must both sign off to confirm the excavator is approved to start after completing the inspection.
This document is a start-up checklist for conducting pre-operation inspections of a hydraulic excavator. It lists various components to check such as fluid levels, filters, electrical systems, undercarriage, and hydraulic systems. Mechanics use the checklist to ensure the excavator is safe to operate by checking for issues like leaks, loose or missing parts, and proper fluid levels. The operator and maintenance engineer must both sign off to confirm the excavator is approved to start after completing the inspection.
This document is a start-up checklist for conducting pre-operation inspections of a hydraulic excavator. It lists various components to check such as fluid levels, filters, electrical systems, undercarriage, and hydraulic systems. Mechanics use the checklist to ensure the excavator is safe to operate by checking for issues like leaks, loose or missing parts, and proper fluid levels. The operator and maintenance engineer must both sign off to confirm the excavator is approved to start after completing the inspection.
Fluids Engine Oil Level – Check and Refill Hydraulic Oil Level – Check and Refill Engine Coolant Level – Check and Refill Fuel Level – Check and Refill Swing Reducer Oil Level – Check and Refill Fuel System Fuel Lines – Check for leaks Fuel Tank – Check for leaks Filters Air Cleaner – Check for Obstruction Fuel and Water Separator – Drain Electrical Battery Connections – Tighten Loose Connections Warning Lights/audible alarms – Check on Actual Operation Horns – Check on Actual Operation Under Carriage Track Pads – Check for Loose Bolts Track Link – Check Link Connections for Looseness Track Rollers – Check for Loose Mounting Final Drive - Check for Leaks Track Tension – Check for Looseness Sprocket Segment – Check for leaks and lose Bolts Counterweight/ Counterweight Bolts – Check for loose Bolts Hydraulic System Cylinder (Boom, Arm, Bucket) – Check for Cracks, loose Bolts and Leaks Hydraulic Lines – Check for Leaks