This document is a checklist used by an assessment center to inventory their tools, equipment, supplies, and facilities for their Shielded Metal Arc Welding 2 qualification. It lists 14 required tools, 13 pieces of equipment, and supplies including electrodes, steel plates, pipes, lenses, and discs. The checklist is used to record quantities on hand, identify any differences from requirements, and note quantities found during compliance audits in subsequent years.
This document is a checklist used by an assessment center to inventory their tools, equipment, supplies, and facilities for their Shielded Metal Arc Welding 2 qualification. It lists 14 required tools, 13 pieces of equipment, and supplies including electrodes, steel plates, pipes, lenses, and discs. The checklist is used to record quantities on hand, identify any differences from requirements, and note quantities found during compliance audits in subsequent years.
This document is a checklist used by an assessment center to inventory their tools, equipment, supplies, and facilities for their Shielded Metal Arc Welding 2 qualification. It lists 14 required tools, 13 pieces of equipment, and supplies including electrodes, steel plates, pipes, lenses, and discs. The checklist is used to record quantities on hand, identify any differences from requirements, and note quantities found during compliance audits in subsequent years.
Checklist of tools, equipment, supplies and materials, and facilities
Name of Assessment Perpetual Succour Academy, Inc. Center Qualification Shielded Metal Arc Welding 2 Item Specification Quantity Quantit Difference Inspector Quantity Quantity Require y on s onsite onsite d Site Remarks during during Compliance Compliance (1) (2) (5) Audit Audit (3) (4) (6) Year 1 Year 2 (7) (7) TOOLS Chipping 1 12 pcs. Hammer 2 Steel Brush 12 pcs. Ballpeen 3 8 pcs. hammer 4 Plier/tongs 12 pcs. Files-bastard 5 10 pcs. cut Head 6 12 pcs. shield/helmet Leather gloves, 7 12 sets long Leather 8 12 sets apron/jacket Safety goggles, 9 wide vision, 2 pcs. clear Oxy-acetylene 10 2 pcs. Goggles Try square 300 11 12 pcs. mm. long Steel square 12 12 pcs. 300 mm. long 13 Files-half round 10 pcs. 14 Fillet gauge 2 pcs. EQUIPMENT Arc Weding machine 1 8 units AC/DC and accesories Welding table/ 2 8 pcs. positioners 3 Electrode oven 1 unit 4 Automatic gas 1 unit cutting machine Portable disc 5 5 units grinder 6 Exhaust fan 1 unit Power 7 1 unit hacksaw 8 Anvil 2 units Work bench w/ 9 bench vice on 2 units 4 corners Oxy- acetylene/Oxy- 10 2 sets LPG cylinder with content Pedestal/bench 11 grinding 1 unit machine 12 Industrial fan 1 unit SUPPLIES AND MATERIALS Electrode 6 boxes 3.2mm E6011 Electrode 3.2mm 6 boxes E7018/6013 Mild steel plate 10mm X 20 pcs. 150mm X 6m Mild steel plate 3.2mm X 20 pcs. 150mm X 6m Carbon steel pipe, schedule 2 pcs. 40 dia. 150 X 3m Filter lens 20 pcs. Lens clear 20 pcs. glass Cut off disc 6mm X 15mm 20 pcs. X 100mm Power saw 5 pcs. blade Metal Chalk 1 box FACILITIES Tool room Assessment room Orientation room Comfort rooms Wash area NOTE: Columns 1-4 to be filled out by the Assessment Center; Columns 5-6 to be filled out by the Inspectors; Column 7 to be filled out by the Compliance Auditors (additional sheets may be used)