Professional Documents
Culture Documents
Page 1 of 10
C911-931-941 Firmware History
Oki Data Confidential
The location of the firmware suite version number is highlighted below in red.
Page 2 of 10
C911-931-941 Firmware History
Oki Data Confidential
CU-Loader: 01.06
CU: A1.25
PU: 00.01.20
PortCPU: 00.00.17
DriverCPU: 00.00.25
Duplex: 00.00.22
OptionTray: 00.00.32
IM: 01.00
NIC: Protocol 01.034
Web 01.05
Config 01.02
1. Added the "Normal 2" setting to the "Narrow Paper Speed" menu item in the printer menu.
2. Added "Com-6 3/4 Envelope", "A2 Envelope" "A6 Envelope", "A7 Envelope" settings to the “Paper
Size” menu item in the “MPTray Config” menu group in the printer menu. As well as in the “Edit
Size” menu item in the “Print Setup” menu group in the Admin Setup menu.
3. Measure to improve print quality by detecting if the printer has a rev D0 fuser installed.
Page 3 of 10
C911-931-941 Firmware History
Oki Data Confidential
CU-Loader: 01.06
CU: A1.23
PU: 00.01.19
PortCPU: 00.00.17
DriverCPU: 00.00.25
Duplex: 00.00.22
OptionTray: 00.00.32
IM: 01.00
NIC: Protocol 01.03
Web 01.05
Config 01.02
1. Measure to prevent leaving paper inside the printer when a 544X toner cartridge error occurs
during printing.
2. “Density Adjustment Media” item was added to the “Calibration” group of the printer menu.
3. Expansion of the adjustment range of the “Color Density” setting and the “SMR Settings” in
the printer menu.
Page 4 of 10
C911-931-941 Firmware History
Oki Data Confidential
CU-Loader: 01.05
CU: A1.19
PU: 00.01.17 or 00.01.18
PortCPU: 00.00.17
DriverCPU: 00.00.25
Duplex: 00.00.22
OptionTray: 00.00.32
IM: 01.00
NIC: Protocol 01.03
Web 01.05
Config 01.02
Note: For best results PU: 00.01.17 or 00.01.18 should be used with a Rev D0 Fuser.
This firmware suite is available for down load with PU version 00.01.17. The suite is installed
into the printer at the factory with PU version 00.01.18. There is no functional difference
between these two revisions of PU firmware.
2. Increased the number of available settings to the Heavy Media Adjustment, Receive Buffer,
and Resource Save Area size in the printer menu.
4. Measure to improve PDF direct print for documents that contain “Didot-Bold” font.
5. Measure to improve the SC002 error caused by inaccurate packet sent from Android device.
6. Measure to eliminate a false toner empty after replacing the spot color duct kit.
9. Measure to prevent the belt unit counter from not resetting after replacement.
Page 5 of 10
C911-931-941 Firmware History
Oki Data Confidential
CU-Loader: 01.05
CU: A1.16
PU: 00.01.16
PortCPU: 00.00.17
DriverCPU: 00.00.24
Duplex: 00.00.22
OptionTray: 00.00.32
IM: 01.00
NIC: Protocol 01.02
Web 01.05
Config 01.02
3. Measures to improve the density adjust function when switching toner (White <-> Clear)
4. Measure to eliminate the reporting of false error codes (106 and 709)
Page 6 of 10
C911-931-941 Firmware History
Oki Data Confidential
CU-Loader: 01.05
CU: A1.15
PU: 00.01.15
PortCPU: 00.00.17
DriverCPU: 00.00.24
Duplex: 00.00.22
OptionTray: 00.00.32
IM: 01.00
NIC: Protocol 01.02
Web 01.05
Config 01.02
1. Addition of PDF Paper Size to printer menu (Settings = Current Tray Size or Size in PDF file)
5. Measures to improve PowerPoint printing speed when data containing transparency is printed with
the PostScript printer driver
6. Measures to improve monochrome printing of InDesign and Illustrator files that contain drop shadow
7. Measure to improve monochrome printing of Acrobat files with PostScript printer driver
9. Measures to insure that the top margin of monochrome printing is the same as color printing
10. Measures to eliminate the dirty edge print on the trailing edge of some short paper sizes
Page 7 of 10
C911-931-941 Firmware History
Oki Data Confidential
CU-Loader: 01.04
CU: A1.13
PU: 00.01.13
PortCPU: 00.00.17
DriverCPU: 00.00.24
Duplex: 00.00.22
OptionTray: 00.00.32
IM: 01.00
NIC: Protocol 01.02
Web 01.04
Config 01.02
2. Measures to improve the fuser performance when changing from continuous printing of narrow
media to printing of wide media
Page 8 of 10
C911-931-941 Firmware History
Oki Data Confidential
CU-Loader: 01.04
CU: A1.13
PU: 00.01.12
PortCPU: 00.00.17
DriverCPU: 00.00.24
Duplex: 00.00.22
OptionTray: 00.00.32
IM: 01.00
NIC: Protocol 01.02
Web 01.04
Config 01.02
1. Addition of the Spot Color scaling (printer driver version 1.0.3 or later is required)
4. Measures to improve PostScript printing of Spot Color data created by the application
7. Measures to eliminate false error reports during duplex printing or Spot Color printing
Page 9 of 10
C911-931-941 Firmware History
Oki Data Confidential
CU-Loader: 01.04
CU: A1.09
PU: 00.01.05
PortCPU: 00.00.17
DriverCPU: 00.00.24
Duplex: 00.00.22
IM: 01.00
NIC: Protocol 01.02
Web 01.03
Config 01.02
2. Measure to improve the reporting of the remaining life of the waste toner box
Page 10 of 10