Professional Documents
Culture Documents
Tools:
Pull-push-rule - used for measuring long distances
Claw hammer - used for driving and pulling out nails
Cross-cut-saw - tool used for cutting across the grain
Ripsaw - used for cutting along the grain
Plumb-bob - used for vertical alignment
Try square - used to test the squareness of a stock
Hack saw - fine toothed saw used to cut metals and pipes
Level bar - tool used in checking vertical and horizontal position
ACTIVITY :
DIRECTION: Identify the different materials and tools being shown in the pictures below.
4. _______________ 5. _________________
Performance Rubrics:
SCORE DESCRIPTION POINTS EQUIVALENT
9-10 Excellent 93-100
6-8 Good 86-92
3-5 Fair 78-85
1-2 Poor 79 and below
EXCERCISES: WHAT YOU ALREADY KNOW?
DIRECTION: Supply what is defined or described. Write your answer on your answer sheet.
_____________1. It is a thin cross laminated sheet of wood.
_____________2. This is made of metal used for fastening.
_____________3. It is a powdered substance mixed with water.
_____________4. It is a fine, dry, gritty substance mixed with water.
_____________5. It is a sawn timber.
_____________6. It is used for measuring long distances.
_____________7. It is used for driving and pulling out nails.
1
_____________8. It is a tool used for cutting along the grain.
_____________9. It is used for vertical alignment.
_____________10. It is a tool used to test the squareness of a stock.
REFLECTION: Write your reflection about the lesson on the space provided.