Professional Documents
Culture Documents
1.2 Manufacturing Procedure Specification COMPLY Helimesh will manufacture to PTTEP specifications
Helimesh Pty Ltd will supply prefabricated Helimesh safety net panels comprising 19mm dia. 316SS tube frame
with diamond mesh fitted. See Helimesh photo P1110289 of a typical Helimesh safety net panel.
Helimesh Pty Ltd will supply all mounting hardware (Heliclips, Helibands, 316SS Banding and 316SS buckles). The
1.8 Complete Scope of Supply COMPLY Accept on TC-2 hardware is specifically designed to isolate the Helimesh 316SS tube from the steel structure to prevent galvanic
corrosion. See Helimesh photo P8310037 showing the Helimesh mounting hardware.
The 60mm dia. safety net support framing is NOT supplied by Helimesh.
Test methods for wire mesh systems by an approved testing facility using an
2.5 YES
approved test method .
NOTE:
1. EVALUATION SHOULD BE "ACCEPT", "DEVIATE" OR "NOT ACCEPT"
2. CONCLUSION" SHOULD BE "QUALIFIED" OR "UNQUALIFIED"
3. AS LONG AS ONE KEY TECHNICAL PARAMETER DOES NOT MEET THE REQUIREMENT, THE CONCLUSION SHOULD BE "UNQUALIFIED".
4. WHEN THERE ARE FIVE OR MORE THAN FIVE "NOT ACCEPT" OCCUR ON THE TECHNICAL PARAMETERS, THE CONCLUSION SHOULD BE "UNQUALIFIED".
TECHNICAL CLARIFICATIONS TO VENDOR OFFER
Client : PTTEP International Ltd. Revision : A2
Project Name : EPCI OF WELLHEAD PLATFORMS, ASSOCIATED PIPELINES Date : 15-Nov-21
AND BROWNFIELD MODIFICATION FOR ZAWTIKA DEVELOPMENT PROJECT PHASE 1D Prepared By : RFF
RFQ Title : RFQ Number : Checked By : EEO / TV
Offer Number :
Bidder : SG SOLUTIONS (HELIMESH) Offer Date :
Received Date :
SR. NO. SUBJECT / REFERENCE CLAUSE TECHNICAL CLARIFICATION VENDOR's RESPONSE STATUS REMARKS
Structural Discipline :
Helimesh Pty Ltd will supply prefabricated Helimesh safety net panels
comprising 19mm dia. 316SS tube frame with diamond mesh fitted. See
Helimesh photo P1110289 of a typical Helimesh safety net panel.
Helimesh Pty Ltd will supply all mounting hardware (Heliclips, Helibands,
Did vendor also apply the tube panels/netting? 316SS Banding and 316SS buckles). The hardware is designed to isolate the
Helimesh 316SS tube from the steel structure to prevent galvanic corrosion.
TC-2 Complete Scope of Supply close
See Helimesh photo P8310037 showing the Helimesh mounting hardware.
The 60mm dia. safety net support framing is NOT supplied by Helimesh.
From design drawing, safety net frame with OD 60 will be manufactured by CTR, vendor only
See response above and photos attached in email.
manufactured tube netting/panels, mesh/netting, and fastening materials.
TC-3 Net Frame CLOSE
2nd Clarification; 2nd Clarification;
Page 1 of 1