Professional Documents
Culture Documents
Submitted to
Department of IT Engineering
Puranmal Lahoti Government Polytechnic, Latur
For the Academic Year: 2021-22
ACKNOWLEDGMENT
Yours sincerely,
TY IT,
Kate Prachet
PLGP, Latur Page 2 of 20
Entrepreneurship Development (EDE)
CERTIFICATE
Micro-Project Proposal
Entrepreneurship Development [22032]
Micro-Project: Part A
“Water dispenser
machine”
The aim of the project is to know the process to make a Water Dispenser
Machine and study about it.
To know the uses, applications & working of Water Dispenser Machine.
2.0 Course Outcomes Addressed
Water Dispenser Machine is designed in such a way that consumers can get
cold and purified water which is free from pollutant or impurity that is usually
present in contaminated water.
There is a wide range of water dispensers such as cold water dispenser, floor
mounted, bottom loaded and table top.
Top loaded water dispenser helps to get clean and pure water at any time. Its
storage capacity is generally upto 500 ml.
Name of
Planned Planned
S. No. Details of Activity Responsible Team
Start Date Finish Date
Members
Collect information about Gadave Pavan &
1 21-11-2021 23-11-2021
topic through internet. Biradar Ganesh
Micro-Project: Part B
“water dispenser
machine”
1.0 Rationale
It is Eco friendly.
The water cooler as we know it was first invented in the early 1906 and is
credited to two men – Halsey Willard Taylor and Luther Haws.
Haws patented the first drinking faucet in 1911.
It is believed that the main reason behind the invention was to not only chill
but to provide purified water.
Water Dispenser Machine is designed in such a way that consumers can get
cold and purified water which is free from pollutant or impurity that is usually
present in contaminated water.
There is a wide range of water dispensers such as cold water dispenser, floor
mounted, bottom loaded and table top.
Top loaded water dispenser helps to get clean and pure water at any time. Its
storage capacity is generally upto 500 ml.
Output:
1. Presentation Skill
2. Communication Skill
3. Team Interaction
4. Documentation Skill
Project Report
Introduction
Resources
o Sketch Pens
o Blade
o Water bottle
o Straw
o Fevicol
o Water
o Scissor to Cut
- There are lots of advantages of this Water dispenser. We have mentioned some
of the merits of Water dispenser.
Take three cardboard’s having length 10cm and breadth of 6cm. Also take
Second cardboard is glued over the base cardboard. The aim behind this is
lifting the bottle.
Now make a small on the front side of cover cardboard through which a straw
can easily pass.
Make a hole as size of plastic bottle base on top cardboard. For this you can
take guide of compass.
With the help of hot melting glue we have glued straw on a plastic bottle
hole. This straw is passing on the cover cardboard.
Top cardboard is now glued following the back part of cover cardboard.
Finally our water dispenser is ready to use.
Output:
Conclusions
Water dispenser is a useful device that we can easily make at our house.
In Water dispenser the main concept is pressure and gravity. Similarly
hear also when we open the cap of bottle water flows through straw and
when we close its lid water stops to flow. When we open the lid of bottle
then air starts to press the water and water flows via straw. And when we
close the lid of water then this pressure is absent as a result water stops to
flow.
****************************************************************
****************************************************************