Professional Documents
Culture Documents
Forms(https://www.office.com/launch/forms?auth=2) DS
63 32 Closed
Responses Average Score Status
1. Name of the Student (Should be complete name, no titles like Mr., Mrs. Etc.)
Latest Responses
63 "Aryan Singh"
63 "A2399819026"
"A2399819048"
Responses
"A023116319002"
3. Branch (Should be mentioned as Sem. & branch like 5ME, 3ME only)
Latest Responses
63 "4ME"
"4ME"
Responses
"BTECH(MECH)+MTECH(AME)"
63 "1"
"2"
Responses
"4ME-2"
https://forms.office.com/Pages/DesignPage.aspx?auth_pvr=OrgId&auth_upn=rsharma19%40amity.edu&lang=en-US&origin=OfficeDotCom&rou… 1/12
11/18/21, 1:30 PM MAE218: Theory of Machines-I (Edit) Microsoft Forms
5. The motion between a pair when limited to a definite direction, irrespective of the direction of
force applied, is known as (1 point)
87% of respondents (55 of 63) answered this question correctly.
https://forms.office.com/Pages/DesignPage.aspx?auth_pvr=OrgId&auth_upn=rsharma19%40amity.edu&lang=en-US&origin=OfficeDotCom&rou… 2/12
11/18/21, 1:30 PM MAE218: Theory of Machines-I (Edit) Microsoft Forms
9. When the two elements of a pair have a surface contact when relative motion takes place and
the surface of one element slides over the surface of the other, the pair formed is known as a
(1 point)
97% of respondents (61 of 63) answered this question correctly.
Lower Pair 61
Higher Pair 2
forced-closed pair 0
Screw pair 0
Sliding pair 2
sliding pair 0
rolling pair 0
lower pair 63
higher pair 0
https://forms.office.com/Pages/DesignPage.aspx?auth_pvr=OrgId&auth_upn=rsharma19%40amity.edu&lang=en-US&origin=OfficeDotCom&rou… 3/12
11/18/21, 1:30 PM MAE218: Theory of Machines-I (Edit) Microsoft Forms
12. The relation between the number of links(l) and the number of binary joints(j) for a kinematic
chain having constrained motion is given by j = 3/2 (l – 2). If the left hand side of this equation
is greater than the right hand side, then the chain is (1 point)
95% of respondents (60 of 63) answered this question correctly.
locked chain 60
completely constrained chain 0
14. If the number of links in a mechanism are equal to l, then the number of possible inversions are
equal to (1 point)
94% of respondents (59 of 63) answered this question correctly.
l–2 2
l–1 2
l 59
l+1 0
15. The mechanism in which two are turning pairs and two are sliding pairs, is called a (1 point)
83% of respondents (52 of 63) answered this question correctly.
elliptical trammel 1
https://forms.office.com/Pages/DesignPage.aspx?auth_pvr=OrgId&auth_upn=rsharma19%40amity.edu&lang=en-US&origin=OfficeDotCom&rou… 4/12
11/18/21, 1:30 PM MAE218: Theory of Machines-I (Edit) Microsoft Forms
16. Which of the following is an inversion of a single slider crank chain? (1 point)
52% of respondents (33 of 63) answered this question correctly.
Pendulum pump 2
17. The whitworth quick return motion mechanism is formed in a slider crank chain when the
(1 point)
60% of respondents (38 of 63) answered this question correctly.
sine functions 62
square roots 0
logarithms 0
inversions 1
19. A point on a connecting link of a double slider crank mechanism traces a (1 point)
100% of respondents (63 of 63) answered this question correctly.
hyperbolic path 0
parabolic path 0
elliptical path 63
https://forms.office.com/Pages/DesignPage.aspx?auth_pvr=OrgId&auth_upn=rsharma19%40amity.edu&lang=en-US&origin=OfficeDotCom&rou… 5/12
11/18/21, 1:30 PM MAE218: Theory of Machines-I (Edit) Microsoft Forms
20. The instantaneous centres which vary with the configuration of mechanism, are called (1 point)
90% of respondents (57 of 63) answered this question correctly.
21. Which of the following property of the instantaneous center is correct? (1 point)
100% of respondents (63 of 63) answered this question correctly.
22. In a drag link quick return mechanism, the shortest link is always fixed. The sum of the shortest
and longest link is (1 point)
98% of respondents (62 of 63) answered this question correctly.
https://forms.office.com/Pages/DesignPage.aspx?auth_pvr=OrgId&auth_upn=rsharma19%40amity.edu&lang=en-US&origin=OfficeDotCom&rou… 6/12
11/18/21, 1:30 PM MAE218: Theory of Machines-I (Edit) Microsoft Forms
24. A crank and slotted lever mechanism used in a shaper has a centre distance of 300 mm
between the centre of oscillation of the slotted lever and the centre of rotation of the crank.
The radius of the crank is 120 mm. Find the ratio of the time of cutting to the time of return
stroke. (1 point)
89% of respondents (56 of 63) answered this question correctly.
1.62 3
1.72 56
1.82 2
1.92 2
25. In a slider crank mechanism, the velocity of piston becomes maximum when (1 point)
86% of respondents (54 of 63) answered this question correctly.
26. In the given figure if P is not the midpoint of the line connecting 1 and 2, what is the locus of P
(1 point)
87% of respondents (55 of 63) answered this question correctly.
Ellipse 55
Straight line 4
Parabola 2
Rectangular hyperbola 2
https://forms.office.com/Pages/DesignPage.aspx?auth_pvr=OrgId&auth_upn=rsharma19%40amity.edu&lang=en-US&origin=OfficeDotCom&rou… 7/12
11/18/21, 1:30 PM MAE218: Theory of Machines-I (Edit) Microsoft Forms
27. Which of the following mechanism is used for connecting two parallel shafts whose axes are at
a small distance apart? (1 point)
97% of respondents (61 of 63) answered this question correctly.
Elliptical trammel 0
Oldham’s coupling 61
Gnome engine 0
-1 27
0 7
1 23
2 6
29. What is the Minimum Transmission Angle (in degrees) for the given mechanism (1 point)
86% of respondents (54 of 63) answered this question correctly.
41.4 4
38 4
25.2 54
33 1
0 15
1 21
2 25
-1 2
https://forms.office.com/Pages/DesignPage.aspx?auth_pvr=OrgId&auth_upn=rsharma19%40amity.edu&lang=en-US&origin=OfficeDotCom&rou… 8/12
11/18/21, 1:30 PM MAE218: Theory of Machines-I (Edit) Microsoft Forms
Double Crank 44
Crank Rocker 18
Double Rocker 1
None of these 0
-1 33
0 2
1 10
2 18
-1 9
0 45
1 7
2 2
34. If n links are connected at the same joint, the joint is equivalent to (1 point)
100% of respondents (63 of 63) answered this question correctly.
(n - 1) binary joints 63
(n - 2) binary joints 0
(n - 3) binary joints 0
https://forms.office.com/Pages/DesignPage.aspx?auth_pvr=OrgId&auth_upn=rsharma19%40amity.edu&lang=en-US&origin=OfficeDotCom&rou… 9/12
11/18/21, 1:30 PM MAE218: Theory of Machines-I (Edit) Microsoft Forms
-1 32
0 10
1 18
2 3
37. In a slider-crank mechanism, the length of the crank and the connecting rod are 100 mm and
160 mm, respectively. The crank is rotating with an angular velocity of 10 radian/s counter-
clockwise. The magnitude of linear velocity (in m/s) of the piston at the instant corresponding
to the configuration shown in the figure is (1 point)
98% of respondents (62 of 63) answered this question correctly.
1 62
5 0
10 1
15 0
1 0
https://forms.office.com/Pages/DesignPage.aspx?auth_pvr=OrgId&auth_upn=rsharma19%40amity.edu&lang=en-US&origin=OfficeDotCom&ro… 10/12
11/18/21, 1:30 PM MAE218: Theory of Machines-I (Edit) Microsoft Forms
39. For the four-bar linkage shown in the figure, the angular velocity of link AB is 1 rad/s. The
length of link CD is 1.5 times the length of link AB. In the configuration shown, the angular
velocity of link CD in rad/s is (1 point)
98% of respondents (62 of 63) answered this question correctly.
3 0
1.5 0
1 1
0.66 62
40. A planar closed kinematic chain is formed with rigid links PQ = 2.0 m, QR = 3.0 m, RS = 2.5 m
and SP = 2.7 m with all revolute joints. The link to be fixed to obtain a double rocker (rocker-
rocker) mechanism is (1 point)
95% of respondents (60 of 63) answered this question correctly.
PQ 1
QR 1
RS 60
SP 1
41. There are two points P and Q on a planar rigid body. The relative velocity between the two
points (1 point)
94% of respondents (59 of 63) answered this question correctly.
https://forms.office.com/Pages/DesignPage.aspx?auth_pvr=OrgId&auth_upn=rsharma19%40amity.edu&lang=en-US&origin=OfficeDotCom&ro… 11/12
11/18/21, 1:30 PM MAE218: Theory of Machines-I (Edit) Microsoft Forms
42. Find the no. of Instantaneous Centres of the given mechanism (1 point)
83% of respondents (52 of 63) answered this question correctly.
10 5
12 5
15 52
18 1
43. For the given mechanism, what is the velocity of slider B (Approx.) if velocity of slider A is 3 m/s
(1 point)
95% of respondents (60 of 63) answered this question correctly.
2.8 m /s 60
5.7 m/s 2
8.8 m/s 0
9.3 m/s 1
Beam engine 2
Pendulum pump 60
https://forms.office.com/Pages/DesignPage.aspx?auth_pvr=OrgId&auth_upn=rsharma19%40amity.edu&lang=en-US&origin=OfficeDotCom&ro… 12/12