Professional Documents
Culture Documents
Notes: (Write "O.K" if correct, mark "X" if faulty, DO NOT TICK!). If the Equipment is defective it must be tagged “Defective” and must be reported to the person responsible for the repair of
the equipment and not to be used at all. If the equipment is beyond repair it must be destroyed and discarded.
1 WELDS 2 SAFETY LATCH 3 GENERAL
1.1 Inspect all welds for signs of wear, cracks 2.1 Inspect the safety latch on the door of cage. 3.1 Check for damage.
1.2 Are all sides closed to prevent tools falling off the 2.2 Inspect the safety bar inserted at rear of cage 3.2 Ensure the cage is used for personnel only.
2.3 Ensure the split pin on safety bar is in place. 3.3 No materials to be lifted inside the cage.
3.4 Is the rated capacity marked on the side of the cage?
Are the employees inside the cage harnessed to the frame (Safety
3.5
Harness)
Location of MML / Rated Max no of
Cage No. Issued by Date Issued Received by Date Returned Remarks
cage capacity Persons :
COMMENTS:
ID NO COMMENTS LOG
COMPILED BY : MANAGER
NAME :
COMPILATION DATE : DATE
APPROVED :
SIGNATURE : SIGNATURE :