Professional Documents
Culture Documents
Caterpillar Performance Handbook 49 62020 Partie72
Caterpillar Performance Handbook 49 62020 Partie72
KEY
Payload (SAE J1197)
Payload (CEN EN 474-3 Rough Terrain)
Payload (CEN EN 474-3 Firm and Level)
Static Tipping Load — Articulated
Static Tipping Load — Straight
Hydraulic Tilt Capacity
Hydraulic Lift Capacity
NOTE: Static tipping loads and operating weight are based on the following loader configuration:
L3 Michelin XHA Tires, Air Conditioning, Ride Control, Power Train Guard, Full Fluids, Fuel Tank,
Coolant, Lubricants, and Operator.
Specifications and ratings conform to the following standards: SAE* J1197, SAE J732, CEN** EN 474-3.
The rated operating load for a loader equipped with a pallet fork is determined by:
• SAE J1197: 50% of full turn static tipping load or hydraulic limit.
• CEN EN 474-3: 60% of full turn static tipping load on rough terrain or hydraulic limit.
• CEN EN 474-3: 80% of full turn static tipping load on firm and level ground or hydraulic limit.
*SAE — Society of Automotive Engineers
**CEN — European Committee for Standardization
5-114
KEY
Payload (SAE J1197)
Payload (CEN EN 474-3 Rough Terrain)
Payload (CEN EN 474-3 Firm and Level)
Static Tipping Load — Articulated
Static Tipping Load — Straight
Hydraulic Tilt Capacity
Hydraulic Lift Capacity
NOTE: Static tipping loads and operating weight are based on the following loader configuration:
L3 Michelin XHA Tires, Air Conditioning, Ride Control, Power Train Guard, Full Fluids, Fuel Tank,
Coolant, Lubricants, and Operator.
Specifications and ratings conform to the following standards: SAE* J1197, SAE J732, CEN** EN 474-3.
The rated operating load for a loader equipped with a pallet fork is determined by:
• SAE J1197: 50% of full turn static tipping load or hydraulic limit.
• CEN EN 474-3: 60% of full turn static tipping load on rough terrain or hydraulic limit.
• CEN EN 474-3: 80% of full turn static tipping load on firm and level ground or hydraulic limit.
*SAE — Society of Automotive Engineers
**CEN — European Committee for Standardization
5-115
100 2540
100 2540
80 2032
80 2032
60 1524 60 1524
40 1016 40 1016
20 508 20 508
0 0 0 0
12000 17000 22000 27000 32000 37000 42000 47000 8000 13000 18000 23000 28000 33000
KEY
Payload (SAE J1197)
Payload (CEN EN 474-3 Rough Terrain)
Payload (CEN EN 474-3 Firm and Level)
Static Tipping Load — Articulated
Static Tipping Load — Straight
Hydraulic Tilt Capacity
Hydraulic Lift Capacity
NOTE: Static tipping loads and operating weight are based on the following loader configuration:
L3 Michelin XHA Tires, Air Conditioning, Ride Control, Power Train Guard, Full Fluids, Fuel Tank,
Coolant, Lubricants, and Operator.
Specifications and ratings conform to the following standards: SAE* J1197, SAE J732, CEN** EN 474-3.
The rated operating load for a loader equipped with a pallet fork is determined by:
• SAE J1197: 50% of full turn static tipping load or hydraulic limit.
• CEN EN 474-3: 60% of full turn static tipping load on rough terrain or hydraulic limit.
• CEN EN 474-3: 80% of full turn static tipping load on firm and level ground or hydraulic limit.
*SAE — Society of Automotive Engineers
**CEN — European Committee for Standardization
The 966K and 950H are not available in all regions. Contact your local Cat dealer for product availability.
5-116
80 2032 80 2032
60 1524 60 1524
40 1016 40 1016
20 508 20 508
0 0 0
0
11000 16000 21000 26000 31000 36000 41000
12000 17000 22000 27000 32000 37000 42000 47000
KEY
Payload (SAE J1197)
Payload (CEN EN 474-3 Rough Terrain)
Payload (CEN EN 474-3 Firm and Level)
Static Tipping Load — Articulated
Static Tipping Load — Straight
Hydraulic Tilt Capacity
Hydraulic Lift Capacity
NOTE: Static tipping loads and operating weight are based on the following loader configuration:
L3 Michelin XHA Tires, Air Conditioning, Ride Control, Power Train Guard, Full Fluids, Fuel Tank,
Coolant, Lubricants, and Operator.
Specifications and ratings conform to the following standards: SAE* J1197, SAE J732, CEN** EN 474-3.
The rated operating load for a loader equipped with a pallet fork is determined by:
• SAE J1197: 50% of full turn static tipping load or hydraulic limit.
• CEN EN 474-3: 60% of full turn static tipping load on rough terrain or hydraulic limit.
• CEN EN 474-3: 80% of full turn static tipping load on firm and level ground or hydraulic limit.
*SAE — Society of Automotive Engineers
**CEN — European Committee for Standardization
The 966H is not available in all regions. Contact your local Cat dealer for product availability.
5-117