Professional Documents
Culture Documents
4. If fire watch ask to issuer i don't know how to operate fire equipment
5. If fire watch ask to receiver that i don't know how to operate fire equipment
6. After the receiver check the hazard analysis Check list is incomplete what he will do
13. Receiver have to leave the job site after inform to issuer what will he do
14. Welding inside the 6 feet deep excavation which type of permit
15. Chemical using inside the confines space which hazard will be
1
b. How long it will take to finish job safely
a. Issuer
b. Fire watch
c. Gas tester
*d. Standby man*
a. To keep it cool
*b. Keep it from becoming airborne*
c. To remove Hazardous surface
d. It is highly flammable
2
11. If an issuer write some precautions on the permit and the receiver
cannot understand. What should the receiver do?
14. For a hot work a fire watch is appointed but he is not qualified.
What action to do?
*a. 4 feet*
b. 75 feet
c. 3 meter
a. Receiver
b. Issuer*
c. Superintendent
d. Supervisor
3
19. Who will extend work permit?
27. When a work crew working on Electrical equipment who will install lock and tag for isolation
1. Issuer and Electrician
2. Electrician and Firewatcher
3. Issuer and receiver
4. Receiver and foreman
4
4. To clean sewer
29. Q. What is most important reason the receiver stay at the work site.
Ans. To provide supervision and maintain safety condition.
30. What is person called who must stay at site and monitor ignition source during welding operation.
Ans. Fire watch
31. Why must the receiver understand all safety precaution written on the permit and he make sure
follow them.
Ans. To prevent accident or injury
32. An issuer allow a driver to drive his truck in processing area. What permit should be require.
Ans. Hot work permit
33. The issuer assign an operator as fire watch the fire watch tell the receiver he cannot operate a fire
extinguisher what would the receiver do.
Ans. Ask the issuer for a qualified fire watch.
34. Issuer assign a fire watch for hot work permit after fire watch tell the issuer he does not operate fire
equipment what should the issuer do.
Ans. Replace him bring another qualified fire watch.
36. The issuer stated on a permit that worker must wear cartridge respirator to spray paint but its
respirator is not available at site what must the receiver do.
Ans. Do not sign the permit until he gets respirator.
37. Can receiver leave the job site he necessary want to go what is process.
Ans. Assign there certified receiver and issuer must agree.
40. Before issue permit issuer what information get from receiver.
Ans. Scope of work and equipment to be used
41. When we install blinding h2s contain there what precaution required.
Ans. Scba (Self-contained breathing apparatus)
5
43. Consideration of Energy isolation and Line brake permit.
Ans. Toxic. Flammable. And wind direction
46. When hot job will be done who will stay at site for 30 minutes.
51. On Hydrocarbon containing pipe line welding required which process will be follow.
53. Issuer obtain an operator as fire watch and the operator tells the
issuer that he does not know how to extinguish fire. What issuer need to do?