This document provides troubleshooting values for a Model FH 12 380 motor with an ABS 4 Channel system. It lists the component being tested, the pins on the connector it is connected to, the conditions and states it should be in during testing, and the expected voltage, resistance, or other values it should have. Measurements are provided for testing battery voltage, control valve resistances with ignition off, relay and ignition voltages with ignition on, and wheel speed sensor resistances with ignition off and voltages when spinning the wheels.
This document provides troubleshooting values for a Model FH 12 380 motor with an ABS 4 Channel system. It lists the component being tested, the pins on the connector it is connected to, the conditions and states it should be in during testing, and the expected voltage, resistance, or other values it should have. Measurements are provided for testing battery voltage, control valve resistances with ignition off, relay and ignition voltages with ignition on, and wheel speed sensor resistances with ignition off and voltages when spinning the wheels.
This document provides troubleshooting values for a Model FH 12 380 motor with an ABS 4 Channel system. It lists the component being tested, the pins on the connector it is connected to, the conditions and states it should be in during testing, and the expected voltage, resistance, or other values it should have. Measurements are provided for testing battery voltage, control valve resistances with ignition off, relay and ignition voltages with ignition on, and wheel speed sensor resistances with ignition off and voltages when spinning the wheels.
Pic. . . . Connector seen from ECU side . . . . Measurements taken with . connector installed Battery (earth) 27 Batt. - Ignition on 0-1V . . . Measurements taken with . connector removed Control valve 1 L 23 27 Ignition off 10 - 22 ohm Control valve 1 L 24 27 Ignition off 10 - 22 ohm Control valve 1R 6 27 Ignition off 10 - 22 ohm Control valve 1R 7 27 Ignition off 10 - 22 ohm Control valve 2 L 21 27 Ignition off 10 - 22 ohm Control valve 2 L 22 27 Ignition off 10 - 22 ohm Control valve 2 R 5 27 Ignition off 10 - 22 ohm Control valve 2 R 4 27 Ignition off 10 - 22 ohm Ignition 9 27 Ignition on 22 - 28 V Relay 8 27 Ignition on 22 - 28 V Relay 25 27 Ignition on 22 - 28 V Wheelspeed sensor 1 L 15 32 Ignition off 1000 - 1990 ohm Wheelspeed sensor 1 L 15 32 Spin wheel at approx. 30 rpm min. 100 mV 1050 AC Wheelspeed sensor 1 R 17 34 Ignition off 1000 - 1990 ohm Wheelspeed sensor 1 R 17 34 Spin wheel at approx. 30 rpm min. 100 mV 1050 AC Wheelspeed sensor 2 L 18 35 Ignition off 1000 - 1990 ohm Wheelspeed sensor 2 L 18 35 Spin wheel at approx. 30 rpm min. 100 mV 1050 AC Wheelspeed sensor 2 R 16 33 Ignition off 1000 - 1990 ohm Wheelspeed sensor 2 R 16 33 Spin wheel at approx. 30 rpm min. 100 mV 1050 AC