Professional Documents
Culture Documents
Chapter - 12 AIEA Fisica
Chapter - 12 AIEA Fisica
Objective:
To familiarize students with Physics or Ultrasound, commonly
used in diagnostic imaging modality.
Slide set prepared
by E.Okuno (S. Paulo, Brazil,
Institute of Physics of S. Paulo University)
IAEA
International Atomic Energy Agency
Chapter 12. TABLE OF CONTENTS
12.1. Introduction
12.2. Ultrasonic Plane Waves
12.3. Ultrasonic Properties of Biological Tissue
12.4. Ultrasonic Transduction
12.5. Doppler Physics
12.6. Biological Effects of Ultrasound
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,2
12.1. INTRODUCTION
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,3
12.1. INTRODUCTION
Attractive characteristics:
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,6
12.2. ULTRASONIC PLANE WAVES
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,7
12.2. ULTRASONIC PLANE WAVES
12.2.1. One-Dimensional Ultrasonic Waves
∂ ∂ ∂ 1 ∂
p ( x, t ) + ρ o u ( x, t ) = 0 p ( x, t ) + u ( x, t ) = 0
∂x ∂t ∂t κ ∂x
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,8
12.2. ULTRASONIC PLANE WAVES
12.2.1. One-Dimensional Ultrasonic Waves
Euler’s equation, which can be Equation of continuity, which can be
derived starting from Newton’s derived by writing a mass balance for an
second law of motion: inc remental volume of the medium:
∂ ∂ ∂ 1 ∂
p(x, t ) + ρo u ( x, t ) = 0 p ( x, t ) + u ( x, t ) = 0
∂x ∂t ∂t κ ∂x
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,9
12.2. ULTRASONIC PLANE WAVES
12.2.2. Acoustic Pressure and Intensity
The strength of an ultrasound wave can also be characterized by its
intensity, I, which is the average power per unit cross-sectional area
E evaluated over a surface perpendicular to the propagation
I= direction. For acoustic plane waves, the intensity is
S∆t related to the pressure amplitude by:
2
P P is the pressure amplitude of the wave;
I (W / m2 ) = ρo is the undisturbed mass density of the medium;
2 ρ 0c c is the speed of sound
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,10
12.2. ULTRASONIC PLANE WAVES
12.2.3. Reflection and Transmission
An ultrasound image displays the magnitude (absolute value of
amplitude) of ultrasound echoes, so a physical understanding of
acoustic wave reflection is valuable for interpreting the images
Z is the acoustic impedance
For plane wave:
Z = ρoc = ρo κ
ρo is the undisturbed mass density of
the medium
c is the speed of sound
θι angle of incidence κ is the compressibility of the
θr angle of reflection medium
θt angle of transmission at a planar interface
between a material with sound speed c1 and a
second material with a higher sound speed c2
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,11
12.2. ULTRASONIC PLANE WAVES
12.2.3. Reflection and Transmission
A plane wave traveling in a semi-
infinite half-space that is incident
upon a planar interface with a
second semi-infinite half-space
The amplitudes of the incident and reflected waves (Pi and Pr,
respectively) are related by the reflection coefficient, R. For plane
waves in fluid media, the reflection coefficient is given by:
−1 ≤ R ≤ 1
Pr Z 2 cosθi − Z1 cosθt
R= = A negative value of R implies that the
Pi Z 2 cosθi + Z1 cosθt reflected wave is inverted with respect to
the incident wave
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,13
12.2. ULTRASONIC PLANE WAVES
12.2.3. Reflection and Transmission
The amplitudes of the incident and transmitted waves (Pi and Pt,
respectively) are related by the transmission coefficient, T. For plane
waves in fluid media, the transmission coefficient is given by:
2Z 2 cosθi
P c1 ≥ c2 or θi ≤ sin −1 (c1 c2 )
T = t = Z 2 cosθi + Z1 cosθt
Pi
0 c1 < c2 and θi > sin −1 (c1 c2 )
In case of normal incidence: θi = θt = 0
Pr Z 2 cosθ i − Z1 cosθ t Z 2 − Z1
R= = =
Pi Z 2 cosθ i + Z1 cosθ t Z 2 + Z1
2Z 2 cos θ i 2Z 2
Pt = c1 ≥ c2 or θi ≤ sin −1 (c1 c2 )
T = = Z 2 cos θ i + Z1 cos θ t Z 2 + Z1
Pi
0 =0 c1 < c2 and θi > sin −1 (c1 c2 )
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,14
12.2. ULTRASONIC PLANE WAVES
12.2.4. Attenuation
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,15
12.2. ULTRASONIC PLANE WAVES
12.2.4. Attenuation
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,16
12.3. ULTRASONIC PROPERTIES OF BIOLOGICAL TISSUE
12.3.1. Sound speed, acoustic impedance,
and attenuation coefficient
Liver 1.65
Blood 1.61-1.65 Unit of acoustic impedance Z
Muscle 1.62-1.71 MRayl
1 M = 106
Skull bone 6.0-7.8
1 Rayl = 1 Pa⋅s⋅m-1
Acoustic properties from Zagzebski (1996) and Shung (2006).
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,18
12.3. ULTRASONIC PROPERTIES OF BIOLOGICAL TISSUE
12.3.1. Sound speed, acoustic impedance,
and attenuation coefficient
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,19
12.3. ULTRASONIC PROPERTIES OF BIOLOGICAL TISSUE
12.3.2. Scattering
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,20
12.3. ULTRASONIC PROPERTIES OF BIOLOGICAL TISSUE
12.3.3. Nonlinear Propagation
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,21
12.3. ULTRASONIC PROPERTIES OF BIOLOGICAL TISSUE
12.3.3. Nonlinear Propagation
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,22
12.4. ULTRASONIC TRANSDUCTION
12.4.1. Piezoelectric Devices
Ultrasonic (piezoelectric) transducers are devices that
convert electrical energy into ultrasound and vice-versa
They were made possible by the discovery of
piezoelectricity in quartz by Pierre and Jacques Curie in
1880
Piezoelectricity is a reversible property of certain
crystalline materials by which:
• a vibration applied to opposite faces of the crystal
produces an alternating net electrical charge
across the crystal
• whereas an alternating voltage applied across the
crystal causes it to vibrate in thickness
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,23
12.4. ULTRASONIC TRANSDUCTION
12.4.1. Piezoelectric Devices
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,24
12.4. ULTRASONIC TRANSDUCTION
12.4.1. Piezoelectric Devices
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,25
12.4. ULTRASONIC TRANSDUCTION
12.4.1. Piezoelectric Devices
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,26
12.4. ULTRASONIC TRANSDUCTION
12.4.2. Transmitted Pulses
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,28
12.4. ULTRASONIC TRANSDUCTION
12.4.3. Radiation and Diffraction
exp( jkz )
U ( x, y ) =
jλ z
k 2
exp j (
x + y2 )ℑ{U (ξ ,η )}
2z
ℑ{U (ξ ,η )} is a two-dimensional spatial Fourier transformation with effective spatial frequencies
~ ~
k x = kx z and k y = ky z
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,29
12.4. ULTRASONIC TRANSDUCTION
12.4.3. Radiation and Diffraction
exp( jkz )
U ( x, y ) =
jλ z
k 2
exp j (
x + y2 )ℑ{U (ξ ,η )}
2z
In medical ultrasound:
• lateral (x) dimension within the image plane and
• elevation (y) dimension perpendicular to the image plane are
typically treated as separable
So the lateral beam pattern can be computed by ignoring the η and
y terms. Ultrasound imaging systems typically employ a
focused rectangular aperture:
ξ 1 −L 2≤ξ ≤ L 2 Lx
U (ξ ) = rect = U (x ) ∝ sinc
L 0 otherwise λF
L is the length of the aperture, sinc(a) = sin(πa)/(πa) is the Fourier
letting z = F, the focal distance, transform of the rect function
yields the lateral beam pattern :
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,30
12.4. ULTRASONIC TRANSDUCTION
12.4.3. Radiation and Diffraction
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,32
12.5. DOPPLER PHYSICS
12.5.1. The Doppler Effect
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,33
12.5. DOPPLER PHYSICS
12.5.1. The Doppler Effect
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,36
12.5. DOPPLER PHYSICS
12.5.2. Continuous-Wave Doppler
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,37
12.5. DOPPLER PHYSICS
12.5.3. Pulsed-Wave Doppler
• The primary shortcoming of CW Doppler is the lack of spatial resolution
resulting from the large area of overlap between the transmitter and
receiver beams
• Pulsed-wave Doppler addresses this limitation by transmitting a sequence
of short pulses similar to those used for imaging rather than a continuous
sine tone
The user determines the location from
which Doppler data will be acquired by
positioning a range-gate cursor within a
B-mode image
As the echo from each successive
transmission is received, a single
sample at the expected arrival time of
echoes from the range gate
(the dotted line) is acquired and held until
Ten consecutive echo signals received from the echo from the next pulse is received
a scatterer moving toward the transducer
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,38
12.5. DOPPLER PHYSICS
12.5.3. Pulsed-Wave Doppler
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,39
12.5. DOPPLER PHYSICS
12.5.3. Pulsed-Wave Doppler
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,40
12.5. DOPPLER PHYSICS
12.5.3. Pulsed-Wave Doppler
c(PRF )
vmax =
4 f o cosθ D
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,41
12.5. DOPPLER PHYSICS
12.5.3. Pulsed-Wave Doppler
c2
vmax =
8 zf o cos θ D
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,42
12.5. DOPPLER PHYSICS
12.5.3. Pulsed-Wave Doppler
c(PRF )
vmax =
4 f o cosθ D
In high-velocity mode, the second (and perhaps the third)
pulse is transmitted before echoes produced by the first
pulse are received from the range gate, such that the
Doppler signal consists of a superposition of echoes from
within the range gate due to the first pulse and echoes
from shallower depths due to the subsequent pulses
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,43
12.6. BIOLOGICAL EFFECTS OF ULTRASOUND
12.6.1. Bioeffects Mechanisms
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,44
12.6. BIOLOGICAL EFFECTS OF ULTRASOUND
12.6.1. Bioeffects Mechanisms
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,45
12.6. BIOLOGICAL EFFECTS OF ULTRASOUND
12.6.1. Bioeffects Mechanisms
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,47
12.6. BIOLOGICAL EFFECTS OF ULTRASOUND
12.6.2. Acoustic output metrics
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,48
12.6. BIOLOGICAL EFFECTS OF ULTRASOUND
12.6.2. Acoustic output metrics
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,49
12.6. BIOLOGICAL EFFECTS OF ULTRASOUND
12.6.2. Acoustic output metrics
The American
• temporal average intensity, ISPTA
• mechanical index, MI, limits
are the de facto output limits for most of the world, due to the
relatively large size of the American medical device market
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,50
12.6. BIOLOGICAL EFFECTS OF ULTRASOUND
12.6.3. Patient safety consideration
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,51
12.6. BIOLOGICAL EFFECTS OF ULTRASOUND
12.6.3. Patient safety consideration
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,53
BIBLIOGRAPHY
IAEA
Diagnostic Radiology Physics: a Handbook for Teachers and Students – chapter 12,54