Professional Documents
Culture Documents
1KHA001025-BEN
Page 1
Issued: March 2005
NEW
Main features • Bay control mimic for local visualization and • Remote control interface for direct or two-
operation of air and gas-insulated switch- step operation
gears in all voltage ranges
• Independent command output relays for
• Unlimited number of control objects through selection, execution ON and execution OFF
modular concept for each control object
• The 19” housing allows the installation in all • Double operation interlocking
kinds of racks and panels
• Control buttons for customer-specific use
• Design of customer-specific front layout by (potential free switchover contacts)
the easy to use editing tool (VISIO) • Alarm LED for customer-specific indications
• Highest safety in control through: • Lamp test function
− Ergonomic single-line visualization • DC supplied via station battery with inde-
− Proven two-hand operational concept pendent circuits for control and indication
(object selection and execution)
Options
− Use of heavy-duty components
• Self-latching outputs with runtime supervi-
• Control mode handling with key switch (Lo- sion
cal, Remote, OFF)
• Digital multifunction measurement unit
• Interlocking handling with key switch (Inter-
locking override ON/OFF) • Analog voltage and current meter
ABB Switzerland Ltd Bay Control Mimic BCM801
Power Technology Systems
1KHA001025-BEN
Page 2
A
D IR ISA p
4 .5 0 3
I 2
4 .5 0 5
3 4 .5 1 8
N
0 .0 1 2 1 2 3
QB 1
QB 2
S E L E
C T S E L E
C T
I U F P QS P F M a xH OE
S E L E
C T
A T T E
N T
.
IN T E R L.
F A IL E D
T O
OP E R A
T E
C R A N K
H A N D LE
IN U S E
Remote control
QA 1
C o n
t r o
l
C L OS E OP E N C A N C E
L
QC 2
S E L E
C T
QB 9 E m er g en cy L o ca l OF F ON
S E L E
C T
Of R e m ote
S E L E
C T
A LA R M L AM P
A CK N
. T ES T
OHL1
library.
Apart from the feeder visualization and local
Commands
Indications
control of a bay, many additional functions
are integrated, like operation mode handling,
two-hand operation, double-operation inter-
Interposing and Primary
locking, remote control interface lamp test, interlocki ng
command latching with runtime supervision.
Therefore this reduces the numbers of auxil-
iary relays, terminals and wiring.
The BCM801 is the preferred choice for all Primary Equipment
Dri ves or local control cubicle
those solution where local control with maxi-
mum availability, maximum lifetime and
save local and emergency control is required.
Fig. 1 Control concept overview
Device design The mechanical design is based on a 19” For selection of the control mode a heavy-
front-plate on which all mechanical and elec- duty key switch with the positions LOCAL,
trical components are mounted. It can be REMOTE, OFF is foreseen.
mounted without additional equipment in a For the interlocking override a separate key
19” hinged frame or cubicle frame of the con- switch can be placed in the mimic.
trol panel.
Analog values (U, I, f, P,Q) can be indicated
The mimic side frames are designed to be on a digital measurement unit which can be
mounted on the backside cable ducts (see mounted in the mimic front. Conventional
Fig.2 and Fig.11). It allows a fast and state of analog meters with phase selection switch are
the art wiring. also possible.
For position indication of the control objects
LEDs are used (green and red). For alarm
indication yellow LEDs or lamp indicators
are available.
The objects are locally controlled via selec-
tion and execution ON / OFF buttons (with-
out illumination). All components can be
easily changed without special tools.
Mimic Mimic design, visualization and If the object is controllable, a selection button
Hardware operation elements belongs to each indication element.
The mimic will be designed with the assis-
tance of a mimic editor which is based on
Microsoft VISIO®. The single-line design up
to the selection and arrangement of the visu-
alization and operating elements is made by
the editor. Fig. 5 Select button with object indication
Alarm visualization
To the alarm LEDs which are belong the ob-
jects status indications, 12 additional alarms
can be placed on the mimic. It can be chosen
between alarm LEDs and lamp indication
modules. The number of alarm indication
modules are limited by four items.
Mimic coloring
The background colors for the mimic can be
selected from the three colors RAL7032,
RAL7035 and NCS1704Y15R (standard).
For the single-line, a total of three different
colors (RAL) can be applied. Therefore for
each voltage level or busbar, another color
Fig. 7 Alarm lamp indication modules
can be chosen.
An additional color (RAL) is available for
special symbols such as earthing elements. Special function buttons
Gas compartments and descriptions such as To control special function via the mimic,
feeder types or objects names are always maximum four control buttons with or with-
black (RAL9070). out illumination can be placed on the mimic.
The mimic inscriptions are made with multi- Two of the control buttons are with change-
color screen printing. over switches, two can be configured as open
or close contact switches (by jumper). The
color of the button can be chosen between
Object visualization red, green, yellow, white.
Each object status is indicated by four LEDs.
The color for open and close status can be
selected between green and red. Additional,
an alarm LED (yellow) is available for each
object. The alarm LED is totally independent
from the object status and can be used e.g. for
gas compartment alert.
Fig. 8 Special function control button
Switch STREBOR
Type: CG8 A280-600 V750D/3 FT2-V
Key type: Strebor, Variant B (SF105)
Key program: J
Front plate: F991 PRC
Switch KABA
Type: CG8 A280-600 V750D/A E-V
Key type: KABA, Variant B (SF105)
Key program: 2J
Front plate: F991 PRC
Switch configuration
REMOTE
LOCAL
OFF
0
1
2
1 3 5 7 9 11
2 6 10
ABB Switzerland Ltd Bay Control Mimic BCM801
Power Technology Systems
1KHA001025-BEN
Page 5
1 3 5 7
2 6
1 3 5 7 9 11 13 15 17 19 21
2 4 6 8 10 12 14 16 18 20 22
ABB Switzerland Ltd Bay Control Mimic BCM801
Power Technology Systems
1KHA001025-BEN
Page 6
General
Display panel 14 mm LED digital display, 3 digits with sign,
Frequency: 4 digits, Energy: 8 digits
Key pad 3 keys for menu control
Dimensions 96 x 96 x 51 mm
Front face protection IP20
Auxiliary supply (AC & DC with the same unit) 85 to 253 V AC/DC, 50/60 Hz
Measurement
Nominal input current 5 A / 1 A (optional)
Nominal input voltage 500 V / 290 V
- phase-to-phase:
- phase-to-neutral:
Accuracy
Current (I) 0.5%
Voltage (U) 0.5%
Power (P) 1%
Active energy 1%
Reactive energy 1%
ABB Switzerland Ltd Bay Control Mimic BCM801
Power Technology Systems
1KHA001025-BEN
Page 7
Labeling front-plate:
Fig. 10 Analog instrument Top label: VOLTMETER
Position 12:00 Hour: 0
Position 1:30 Hour: R0
Application
Position 3:00 Hour: S0
Analog meters can be used instead of the
Position 4:30 Hour: T0
digital meter for displaying the phase cur-
Position 7:30 Hour: TR
rents and voltages locally. All meters are
Position 9:00 Hour: ST
simple analog instruments based on electro-
Position 10:30 Hour: RS
mechanical construction. The configuration
Switch angle: 30 degree
of the meters is performed with the BCM801
editor.
Front view
Package description
The package includes the following compo-
nents:
• 3 analog current meter
(GMC-Instru- ments Pffn 96x24)
• 1 analog voltmeter
(GMC-Instruments Pffn 96x24)
• 1 selection key for selecting the displaying
voltage.
ST
5 R0
S0
T0
editor.
4
1
10 6 2 12
Customer Interfaces
1. Power supply (X1)
2. Local/ Remote control, Runtime supervision interface, remote EXE ON/EXE OFF (X2)
3. Alarms (X3)
4. Special function buttons (X4)
5. Object interface (X11)
Internal Interfaces
6. Alarm indications LEDs & lamp indicators; Attention: Only X301 to X304 can be used
for lamp indicators (X301..X312)
7. Lamp test button (X401), Execution OFF (X402), Execution ON (X403)
8. Special function buttons (X404..X407)
9. Object selection button (X110)
10. Object indication module (X111)
11. Cascading interface to the first object unit (X32)
Jumpers
12. Connection of - supply “commands” with - supply “indication” (JP1)
Connection of + supply “commands” with + supply “indication” (JP2)
13. Selection of special control button 3 as open or close contact type (JP3)
Selection of special control button 4 as open or close contact type (JP4)
14. Connection of execution ON contact of objects-1 on the common potential (JP5)
Connection of execution OFF contact of objects-1 on the common potential (JP6)
15. Self-latching of execution contact; Attention: only in combination with
runtime supervision relay (JP7)
ABB Switzerland Ltd Bay Control Mimic BCM801
Power Technology Systems
1KHA001025-BEN
Page 10
Indication supply
Control supply
1 2 3 4
X1
Jumper 2
Jumper 1
+V -V +V -V
supply circuits
• +DC + Control voltage
• -DC - Control voltage
• +LED + Indication voltage
• -LED - Indication voltage
BCM801
(double operation
Remote Selection
suppervision
Object running
Local Selection
Control button
indication LED
Supply special
Drive running
control button
interlocking)
+DC to NCC
Runtime
LED (X4)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 4,8,11,14
X2 X4
runtime suppervision infomation
Object running information (can
be connected to the next BCM)
Local / Remote
Selection
ABB Switzerland Ltd Bay Control Mimic BCM801
Power Technology Systems
1KHA001025-BEN
Page 11
-LED -LED -LED -LED -LED -LED -LED -LED -LED -LED -LED -LED +LED
BCM801
Alarm Ind. 10
Alarm Ind. 11
Alarm Ind. 12
Alarm Ind. 1
Alarm Ind. 2
Alarm Ind. 3
Alarm Ind. 4
Alarm Ind. 5
Alarm Ind. 6
Alarm Ind. 7
Alarm Ind. 8
Alarm Ind. 9
1 2 3 4 5 6 7 8 9 10 11 12 13 14
X3
Alarm contacts
from primary
apparatus
Push button 2
Push button 4
Push button 1
Push button 3
JP4
JP3
1 2 3 4 5 6 7 8 9 10 11 12 13 14
X4
Customer Interfaces
1. Object 1 interface (X11)
2. Object 2 interface (X21)
Internal Interfaces
3. Object 1 selection button (X110)
4. Object 1 indication module (X111)
5. Object 2 selection button (X110)
6. Object 2 indication module (X111)
7. Cascading interface to previous base or object unit (X31)
8. Cascading interface to next object unit (X31)
Jumpers
9. Connection of execution ON contact of objects 1 on the common potential (JP5)
Connection of execution OFF contact of objects 1 on the common potential (JP6)
10. Connection of execution ON contact of objects 2 on the common potential (JP7)
Connection of execution OFF contact of objects 2 on the common potential (JP8)
ABB Switzerland Ltd Bay Control Mimic BCM801
Power Technology Systems
1KHA001025-BEN
Page 13
+LED -LED +LED -LED -LED -DC -DC -DC BCM801 Internal bus
BCM801
Object Alarm Ind.
Close Command
Remote Exe On
Open Command
Close Pos. Ind.
Remote Select
(direct control)
(direct control)
Select Cmd
JP6
JP5
X11 / 1 2 3 4 5 6 7 8 9 10 11 12 13 14
X21
-C +C +C
(from prim aparatus)
-KME
Close Cmd
Close Position
Open Position
Motor Relay
-KMA
Open Cmd
Motor Relay
220 V DC ±15%
Weight 11.8 kg
ABB Switzerland Ltd Bay Control Mimic BCM801
Power Technology Systems
1KHA001025-BEN
Page 15
Dimensioned The BCM801 is built as a 19 inch Euro rack-mounted module, height 10 U (443.5 mm). It is
drawing intended to be fitted in a 19 inch hinged frame. The BCM801 is fixed by means of M6 screws.
482.5
240 465
1 4 .5 0 3
A
I 4 .5 0 5 2
3 4 .5 1 8
N 0 .0 1 2 1 2 3
QB2 QB 1
SEL EC T
SEL EC T
I U F PQ S PF Ma x H O E
215
6
QC1
SEL EC T
QA1
SEL EC T
FAIL ED C RANK
ATTENT.
TO HAND LE
IN TERL .
OPER ATE I N U SE
165.2
209.6
443.5
368.4
412.8
Control
QC2
SEL EC T
QB 9
SEL EC T
INTERLOCKING
CONTROL MO DE BYPASS
AL ARM L AM P
AC KN . TEST
A BB
450
Mounting rail
Ordering The BCM801 have to be ordered always in combination with a customer specific VISIO®
drawing which includes all relevant components.
Order Number 1KHL150301
www.abb.com/substationautomation