Professional Documents
Culture Documents
PROJECT SYNOPSIS ON
PROF. V.T.Metakari.
ELECTRICAL
OF
PANHALA.
i
SMART WATER PUMPING SYSTEM
Rutuja Powar
Neha Nikam
Sushant Patil
Vaishnavi Gavali
PANHALA.
ii
ABSTRACT
Current global technology plays an important role in the field of agriculture. Automation
is the technology with which a procedure or process is executed without human assistance. The
main objective of this work is to determine how a person can use the automatic irrigation system
of his own moderately economical facilities in a few hours to connect some electronic
components and other materials. An automatic irrigation system based on sensor-based systems
has been designed and implemented as one of the most widely used and advantageous automatic
systems. This will help people in their daily activities, thus saving them time and hard work.
This system uses sensor technology with the microcontroller, relay, DC motor and
battery. Behave as an intelligent switching system that detects the soil moisture level and
irrigates the plant if necessary. The ON / OFF motor will automatically be based on the dryness
level of the soil. Sensor readings are transmitted to a computer to generate graphs for analysis.
This type of irrigation system is easily controlled and controlled using a computer. In general,
iii
this system applies automatically for small and large gardens, nurseries, greenhouses and green
roofs. This will also save time and energy, as well as minimize water loss. It will also help the
farmer to benefit from the plantation without solving irrigation planning problems
1 INTRODUCTION 1-3
1.1 General 1
1.2 Motivation of the present work 1
1.3 Aims and objectives of the present work 2
1.4 Layout of the report 3
1.5 Closure 3
iv
2
2.1 Introduction 4
2.2 Elastostatics of laminated composite beams 5
2.2.1 Elasticity Solutions of laminated composite beams 5
4 DETAILS OF COMPONENTS
5 EXPECTED RESULTS
REFERENCES
v
Sr.No Content Page Number
1 Introduction
1.1General 1-3
12 Aim and Objective 4
2 Literature Review
2.1 General 5
2.2 Classification
7-8
3 Working principle
3.1 Block Diagram 9
3.2 Description 10-11
4 Hardware Design
4.1 Arduino 12
4.2 LCD 16
4.3 Soil Moisture sensor 18
4.4 Temperature sensor 22
4.5 solar Plate 24
4.6 Battary. 25
4.7 Plate 26
5 Circuit Diagram 28
Flow chart 29
vi
---
LIST OF FIGURES
Figure Page
Caption
No. No.
1 Block diagram 9
2 Arduino 12
3 LCD 18
4 Moisture sensor 22
5 Temperature Sensor 23
6 Solar plate 25
7 Battary 26
8 Pump 27
9 Circuit diagram 29
10 Flow chart 30
vii
viii