SCREWDRIVERS tempered at the tip used to loosen or tighten screws.
1. Standard / flat screwdrivers
2. Philips Screwdrivers
Types of Screwdrivers 3.Stubby Screwdriver
4.Allen Screwdriver/ Wrench
Wedge shaped ; resembles as - negative
Standard / flat sign; used to drive screws with a single screwdrivers slot head.
Cross tip resembling a positive sign,+ ;
Philips Screwdrivers used to drive screw with cross slot heads
Short shank or blade and a shorted
Stubby Screwdriver handle; used to turn screw in tight spaces. Standard screws cannot be used. TLE GRADE 7 Allen Screwdriver/ A shape of a screwdriver or a wrench;Study to Wrench drive screws with hexagonal slot heads.
Tools used in driving or pounding and
Hammers pulling out nails. They are made of hard steel, wood, plastic or rubber.
Hammer with one side of the head split
Claw Hammer and curved, used for extracting nails.
Has rubber head and is usually used to
Mallet ( Rubber Head ) knock wooden pieces together, or to drive dowels or chisels.
Known as machinist's hammer used in
Ballpen hammer metal working.
1. Ballpen hammer
Types of Hammers 2. Mallet ( Rubber Head )
3. Claw Hammer
a. Combination Pliers
Types of Pliers b. Side cutting Pliers
c. Long Nose Pliers
Used for gripping, cutting and electrical
Combination Pliers wires and cable and small snails. TLE GRADE 7 Tools are made from metal with insulator Study
in the handle and used for cutting,
Pliers twisting, bending, holding and gripping wires and cable.
use for cutting fine, medium and big wires
Side Cutting and cables.
Used for cutting, holding fine wires. Can
be reach tight spaces or small openings; Long Nose Pliers used in making termnal loops of copper wires.
Used for removing insulation of medium-
Wire stripper sized wires ranging from gauge #10 to gauge #16
Used to linemen to remove insulation of
Electrician's Knife wire and cables in low and high voltage transmission line.
Small drilling machine with a chuck
Portable electric drill capacity of 1/4 to 1/2. Use in making holes on metal sheets and concrete walls.
Tool used to cut metal conduit and
Hacksaw armored cable. TLE GRADE 7 Electrical Materials Used to control flow of current in an Study electrical ciruit.
Source of energy for current consuming
Convience Outlet appliances. Male plug of an appliances is inserted.
Outlet typically mounted on the surface
Surface Types portion of the wall.
Typically buried in concrete and is attach
Flush type to the utility box.
Allow the flow of electric current. Use in
Male plug making extension wires.
Lamp Socket or Ceiling receptacles. It is
Lamp holders used to hold the lamp
Device connects and disconnects the flow
Switch of an electric current in a circuit.
Protective device that automatically blows
Fuse and cyts the current when short circuit overload. TLECircuit GRADE 7 Breaker To trips and cut the current when trouble Study
in the circuit. 1,2,3,4 poles
Octagonal shaped material connects,
Junction Box joints, the wires.
Rectangular shaped metallic or plastic
Utility Box material.
Used for installation and commonly used
Flat Cord for making an extension.
Copper or aluminum, joined together to
Standard wire make a singlew wire.
Solid Wire Single strand of copper or aluminum wire
Tubes use not only to protect wires but
Conduits Pipes also to route electrical wiring.
a. Rigid Steel Conduit
b. Flexible Non Metallic Conduit or
Common types of Corrugated Plastic Conduit
conduit pipes c. Rigid Non Metallic Conduit ( PVC)