Professional Documents
Culture Documents
Reviewed by
Reviewer:
Department:
Model Created Date: 02/11/2021
Reviewer
Comments:
Executive Summary
This is where to put your Executive summary. So, replace this text with your overall
Project Description.
Summary
Model Information
Static Stress with Linear Material Models may have multiple load cases. This allows a model to be analyzed with multiple
loads while solving the equations a single time. The following is a list of load case multipliers that were analyzed with this
model.
Centrifugal Information
Multiphysics Information
Processor Information
Element Information
Element Properties used for:
ANSI W 8x18 00000001:1
ST-01 ATIEZADOR:1
ST-01 ATIEZADOR:2
ST-01 TAPA:1
ST-01 TAPA:2
ST-01 CASCO:1
ST-01 TAPA:1
ST-01 TAPA:2
ST-01 CASCO:1
ST-01 TAPA:1
ST-01 TAPA:2
ST-01 CASCO:1
ST-01 TAPA:1
ST-01 TAPA:2
ST-01 CASCO:1
ST-01 CONTRAPOYO:1
ST-01 CONTRAPOYO:2
ST-01 CONTRAPOYO:3
ST-01 CONTRAPOYO:4
Material Information
Loads
FEA Object Group 3: Surface Forces
Surface Force
Part Surface
ID Description Magnitude (N) Vx Vy Vz
Number Number
Constraints
FEA Object Group 1: Surface General Constraints
DESPLAZAMIENTOS
VON MISES
MAXIMO PRINCIPAL
MEDIO PRINCIPAL
MINIMO PRINCIPAL
TENSOR X-X
TENSOR Y-Y
TENSOR Z-Z
MIEMBRO CRITICO
Bar / Point (mm) FX (kgf) FY (kgf) FZ (kgf) MX (kgfm) MY (kgfm) MZ (kgfm) Kz UZ (mm)
(kgf/mm)
Current value 0.0 0.0 -0.0000 0.0 0.0000 0.0 0.0 -11.1318
for bar: 6 6 6 6 6 6 6 6
in point: x=0.0 x=0.0 x=0.0 x=0.0 x=0.0 x=0.0 x=0.0 x=0.0
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)