Professional Documents
Culture Documents
Step 1:
Open any project (that required to be installed in USB).
Step2:
Select
Project Export to Runtime Utility Center
After that, the project will BUILD and a pop-up page appears.
Step3:
Select the destination (user preferred location)
And select create RUC package.
Step 4:
Step 5:
After opening the RUC package and then select Create project installation package.
By doing the step 6, these Files will be created in selected location. Select these files and copy it in the
Pen Drive.
Note: The pen drive must not contain any files or documents in it, therefore it should be formatted.
Step 8:
Before Plugging in the Pen drive to any hardware or plc, the following steps are to be followed;