Professional Documents
Culture Documents
Log In
Reverse Engineering 101: Guide to Creating CAD from 3D Scans > Create a new coordinate system
Reverse
STEP 3
Engineering 101
Create a new
coordinate system
coordinate system
Slice a 2D cross
When importing scan data into SOLIDWORKS, the
section software places 3D meshes in an arbitrary position and
rotation in space, depending on how you align the data
Sketch the part
before you import it in SOLIDWORKS.
Revolve the sketch
into 3D solid
For best practices, it’s good to create a new coordinate
Analyze
system. SOLIDWORKS wants your part centered and
Scan to CAD work�ow aligned along the Top, Right, and Front planes so the
video
part is centered. Orientating the part to a new
coordinate system puts the 3D model in a logical
space within the CAD modeling software.
Contact us
If you’re happy with the results, you can then delete the sketches
Contact us
Previous Next
Planning Slice a 2D cross section of
the part
3D Scan Samples
3D Scanning 101
Where to Buy