Professional Documents
Culture Documents
Abstract
Abstract
___ onMRBC
42.00 M
3 (a) C. C. Nominal Mix, M-10 and MSA-40 mm 3058.00 M
3
128436.00
( S.O.R.2015-16 Page No. 20, Item No.S3-(A)
Item No.3
Providing & Laying in position with Batchmix Plant &
Transit Mixer "DESIGN MIX" cement concrete using
cement sand and crushed aggregate for C.C./ R.C.C work
including necessary formwork, centering, scaffolding,
compaction by vibrator, curing as directed with all lead &
lift etc complete without dewatering and excluding the
cost of steel reinforcement.
(A) For Footing of column / Abutment / Pier / Bottom slab
of barrel / Plinth course / Coping etc.
174.57 M
3
(a) Concrete grade M-15 and MSA-20 mm 3879.00 M
3
677157.03
( S.O.R.2015-16 Page No. 22, Item No. S 5-(A)(a)
60.94 M
3 (b) Concrete grade M-20 and MSA-20 mm 3879.00 M
3
236386.26
( S.O.R.2015-16 Page No. 22, Item No. S 5-(A)(c)
(D) For Kerb / Wearing coat.
3.45 M
3 (j) Concrete grade M-25 and MSA -10 to 20mm 4757.00 16411.65
( S.O.R.2015-16 Page No. 22, Item No. S 5-(D)(j)
(E) For Column / Beam / Solid Slab of Road Bridge /
Barrel / Cutoff wall etc.
208.34 M
3 (m) Concrete grade M-25 and MSA-20 mm 4791.00 998156.94
( S.O.R.2015-16 Page No. 22, Item No. S 5-(E)(m)
(F) For Perapet wall of Road Bridge / Structure ,
Approach Slab.
23.96 M
3 (p) Concrete grade M-25 and MSA -10 to 20 mm 6771.00 162233.16
( S.O.R.2015-16 Page No. 22, Item No. S 5-(F)(p)
Qty. Unit. Description of Items. Rate Per Amount
1 2 3 4 5 6
Item No. 4
Providing & Placing in position reinforcement bars
including cutting, bending, welding joints where
21.48 MT 42175.00 MT 905919.00
necessary, hooking etc. complete as per drawing for all
lead and lifts. (B) TMT
( S.O.R.2015-16 Page No. 23, Item No. S-6-(B))
Item No. 5
Providing and fixing in position pre-moulded asphalt or
SqMt bitumen cork board of approved quality and 1161.10 SqMt
specifications as per design and drawing.
( S.O.R.2015-16, Page No. 26, Item No.S-31 (B))
Item No.6
Providing and fixing in position P.V.C. heavy duty water
stops in barrels, troughs and wing walls with 25 mm wide
expansion joint as shown in drawing including filling the
60.00 m 141.34 m 8480.40
joints with asphalt pad or bitumen cork board of
approved quality. (Asphalt pad or bitumen cork board will
be paid seperatly)
225 mm WIDE P.V.C. WATER STOP
( S.O.R.2015-16 Page No.26, Item No. 30(a))
Item No.7
Providing and filling the polysulphide joint sealent of the
approved make in the expansion and contraction joints in
43.50 m 125.40 m 5455.40
the C.C. lining including clearing the joints with air water
jet.
( S.O.R.2015-16 Page No.18, Item No. L-12 )
Item No.8