Machine Sr. No.: DATE Sr. Activity Parameter Check Point / Value Record 1 2 3 4 5 6 7 8 9 10 11 12 13 14 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 No. Check & correct for any abnormal Tighten all loose parts and 1 Noise & Vibretion noise and vibration due to loose made perfect parts of lifts Operate & Check, circuit should Check for 'Emergency Push' 2 switch off after pressing Push Done found functioning button Button Take lift up and Down in inching Check the electromagnetic mode, Verify stopping 3 Checked & found functioning brake functioning immediately after release of button. Check for water ingress into 4 No presence of water Observe no water motor and electric control box
Check the function of limit check & reset if required, for up
5 Found Functioning switches ,dn, door limit swich functioning check visualy for functioning of 6 Check for clear barricade area Checked & found ok sliding door and clear area. Check the working of hooter 7 switch on & ckeck found Functioning and light Clean the lift and motor 8 clean Done carriage 9 Record hour meter reading Record the reading Actual value Check and record incoming 10 power supply voltage 400 volt Record the reading Actual value +\- 5% Check operation of hand Operate & Check hand release 11 release system (if not functioning Found Functioning system check EM brake U gap) Checking of all power and limit 12 indicators R,Y,B & limit swiches Found Functioning switch indicators Checking and removing of any observe clear path before 13 obstacles in the travel path of No obbsacles observed operating lift Check performance and operate & check functioning of 14 Found Functioning operation of remote pendent Up,Dn & immergency switches stand on top of lift & insure 15 Anchoring Bracket Found Intact fastners in position stand on top of lift & insure 16 Cable guide alignment smooth travelling of cable. Also Found Functioning check rubber strip.
Name & Sign. Of lift Operator Name Signature of the Engineer - P&M Signature of the Engineer - Electrical - Verified
Safety Instructions for Passenger Hoists:
Above points to be read with operational mannual for further detail. All the tolerances and diamensions need to be varified as per the figures mentioned in Mannual and to replced if observed beyond acceptable limits